8996 MAINTENANCE OF CLEANING CRANE RAIL TRACK BOTH SIDE DRAIN AND PAINTING JETTIES AT ND MUMBAI UNDER AGE BR I UNDER GE NW KUNJALI

Amount

M & L for preparation of old steel surfaces of cranes rail track n exc 15cm width or girth both side cleaning and removing loosely inherent material/paint using hand tools a wire brush/ scraper (confirming to SSPC SP-2 st2) or using a power tool such as a grinder (confirming to SSPC SP-2 st 3) and then washing it off with acetone or thinner (confirming to SSPC SP- 1) or any other water based liquid solvent to get cleaner surface for painting, coating, and then applying two coats of epoxy paint over one coat of red oxide complete all as specifed and directed.

M & L for preparation of old steel surfaces of cranes rail track exc 15cm width or girth both side cleaning and removing loosely inherent material/paint using hand tools a wire brush/ scraper (confirming to SSPC SP-2 st2) or using a power tool such as a grinder (confirming to SSPC SP-2 st 3) and then washing it off with acetone or thinner (confirming to SSPC SP- 1) or any other water based liquid solvent to get cleaner surface for painting, coating, and then applying two coats of epoxy paint over one coat of red oxide complete all as specifed and directed.

M&L for preparation of old steel surfaces exc 10cm width of girth and applying two coats of epoxy paint over a coat of epoxy primer complete all as specifed and directed.

M & L for Cleaning of covered drains of sectional aea exc 0.05 Sqm but n.exc 0.15 Sqm by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils outside from MD land, including taking precautionary and safety measures etc complete all as spcified and directed.

M & L for Cleaning of covered drains of sectional aea exc 0.24 Sqm but n.exc 1 Sqm by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils outside from MD land, including taking precautionary and safety measures etc. complete all as spcified and directed.

Taking down 40mm bore, GI tubing and connections for cleaning and refixing complete all as specifed and directed.

S&F 40 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors including taking down existing old GI tubing and connections complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Supply and fix structural steel framed works such as angle, channel etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed.

Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. .

Supply and fix mild steel as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for complete all as specified and directed. .

Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set in cement mortar 1:4, complete all as specifed and directed. (Note: Reinforcement shall be measured and paid seperately)

M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed.

All as per item No 14 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Demolition of cement concrete in ground floor and paving any thickness below or above ground level un re-inforced, including roof, complete all as specified and directed

Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete/stone surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and complete all as specified and directed.

Material and labour for gently cleaning the surface of the stone masonry and piers with specialized water misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface, without over wetting, followed up by gentle brushing with soft nylon brushes as specified. Gentle surface cleaning may include using water misting and mild pH balanced surfactants as specified for indicated areas to remove surface dirt, grit, surface accretions, lime wash etc by means of water misting and pH balanced surfactants and cleaning complete all as specified and directed. Note:- Quoted rate shall be inclusive of removing vegetation on wall surfaces, chajjas etc and erection and dismantling of MS tubular double scaffolding up to Five storey building and provision of necessary safety equipments to the skilled workers to carry out work.

M&L 150mm thick PCC 1:2:4 type B-I using 20mm graded crushed stone aggregates as in floor finished cement concrete surface even and smooth using extra cement complete all as specified and directed .

M & L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof, floor complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement concrete complete all as specified and as directed. Note : WPC shall be measuerd and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for brushing neat cement slurry with 3Kg of cement per square metre all as specified and directed.

M & L for priming @ 0.8 Kg per Sqm of finished concrete surface complete and an evenly a coat of cold bituminous at 1 Kg per Sqm and applying seating cloth over cold bituminous , finaly paving bitumen of any penetration at 2.5Kg per Sqm complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and directed.

Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal complete all as specified and directed. .

Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of Jetties, wall, beam,coloum etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing ready mix polymer plaster and finally finishing the surface all as specified and directed. Make :- Dr.Fixit/Sunanda/Chemestik/Fosroc as approved by GE. Note :- (New reinforcement and MS Sections will be measured and paid separately).

Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed

M & L for machine pressed precast concrete interlocking paver block With Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete over 25 mm thick Sand cushion complete all as specified and directed.

M&L for Preparation of floor PCC, interlocking tiles, chequered tiles, any floor tiles over a one coat of Glossy floor paint (indigo paints) on floor surfaces of any description and applying one coat of indigo paints complete all as specified and directed.

M&L for 25mm thick snad under the interlocking tiles complete all as specified and as directed.

M&L for applying 2mm thick thermoplastic paint in letter writing, Nos, Dashes, Arrow etc all as per manufacturer's instruction and complete all as specified and directed.

M&L for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Removing debris exc 1.50 Km but n exc 20 Km and depositing where directed, in soil outside MD land complete all as specified and directed. .

SHRI SAI ENTERPRISES

siddharth and company

SACHINENTERPRISES

Sachin santosh dalvi

sai construction