Const. of Rest House cum Auditorium

Amount

CIVIL WORKS :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of column steps septic tank etc. including refilling ( return filling) the quantity as necessary after completion of work breaking clods in return filling dressing watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level (a) In Ordinary Soil

Earth sand filling in plinth in layers not more than 150mm thick necessary carriage watering ramming etc. complete as directed and specified including payment of land compensation forest Royality Sale Tax and other duties and taxes as may be necessary (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps walls brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately) (a) In Prop 1 : 3 : 6

Plain cement concrete floor base in prop 1 : 3 : 6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary and curing etc. completed as directed. i) 35mm thick

Providing and laying 25 mm thick damp proof course with cement concrete in prop 1 : 1 ½ : 3 with graded stone agg of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacture including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

Providing form work of ordinary timber planking so as to give a Rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in . Foundation footing, base of columns pile cap raft and mass concrete works etc. (ii) Using 25mm thick plank

Sides of tie beams grade beams etc. at or below ground level (ii) Using 25mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, Polygonal in plan or any shape like Tee / L etc. having plane vertical face (ii) Using 25mm thick plank

Sides and soffits of beams beam hunching cantilever girders bressumers lintels and horizontal ties. (a) for depth not exceeding 1.0 m (ii) Using 25mm thick plank

Flat surfaces such as soffits of suspended floors roofs landing cantilever slabs chajjas balconies and the like (a) Floors etc. upto 200mm in thickness (ii) Using 25mm thick Plank

Extra for each subsequent 1.00 m height or part thereof beyond the initial height of 4.00 m as mentioned in Item No. 3.1.1

Providing brick soling in foundation and under floor with stone / best quality picked Jhama Brick, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering complete. (a) Brick on flat soling

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (Protruding M.S. Rod / Tor Steel of column to be embedded in cement mortar and will be measured and paid separately) (A) 112 mm thick brick wall a) In cement mortar in Prop 1 : 4

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level a) 112 mm thick brick / RB Wall

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick

Providing Ceramic Wall Tiles of approved quality, size, shape and thickness not less than 8 mm thick in prop 1 : 3 including cutting where necessary finis….. completed as directed. c) Delux Range Somany / Orient / Nicto / Asian Make iv) Of size 300 mm X 600 mm and above

Providing VITRIFIED floor tiles of approved quality of specified size shape and thickness not less than 18mm on floors, skirting risers and treads of steps over 15mm thick base of cement mortar in prop 1 : 3 including cutting … completed as directed. A) ON FLOOR b) Executive Range Somany / Orient / Nitco / Varmora / VITA / Marbito make. i) Of size 800 mm X 800 mm and above

Providing polished granite Slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop 1 : 3 including cutting……………….. completed as directed. (A) Normal Qualtity (ii) With White cement

Providing ANTISKID tiles of approved quality size, shape not less than 8 mm on floor, skirting over cement mortar bed 15 mm thick of 1 : 3 approved make fix with Fix – A – Tile (Choksey / Sika / Pedelite / Rouf ) / white cement complete at all levels as directed and specified. (A) CERAMIC i) Normal Range (Size 300 mm X 300 mm and above) (a) Orient made : Galaxy Brown, Galaxy Creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green……

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (A) On rough side (b) In Cement Mortar 1 : 4

B) On fair side b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster

Providing and fixing in position suspended false ceiling using E – Grid (Exposed Ceiling Suspension 2430 System) of Gird size 600 mm X 600 mm / 1200 mm X 600 mm with main runner 38 X 24 mm cross tee 29 mm X 24 mm & wall angle 24 mm X 24 mm. Using 4mm / 6 mm thick High P…… Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade / make over a coat of cement primer before installing it on the Girt.. (A) Standard Ceilling of Everest Make or Equivalent as directed by the department.

Providing pre painted galvanized Iron sheet roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately) TATA Blue scope / Dyna roof / Durako. (iv) 0.55 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iv) 0.55 mm thick

Providing wood work in frame (Chowkaths) of Door Window C / Window and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry wall including supplying fitting and fixing with M.S. Hold fast (40 mm X 3 mm X 250 mm ) as per design embedded in cement concrete block in proportion 1 : 2 : 4 and with two coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified. (b) With 1st Class Timber

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) b) 35mm thick

Providing fitting and fixing anodized aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant I.S specifications) and providing and fixing handles angle completed as directed. (b) 3 Track Sliding Window i) 6 mm clear glass

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately). a)Side hung and Top hung windows and ventilators ii)5mm frosted glass

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concerete / mortar walls and ceiling both internal and external ) after removing all loosely adhering material from the wall surface with the help of emery stone, etc. completed as directed. (i) 1.5 mm thick

m) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. (i).Priming coat with distemper primer

(ii). Top coat

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Finishing Old / New wall with water proofing weather coat smooth anti – fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Supplying fitting and fixing in position reinforcement Bars conforming to relevant I S code for R C C work / R, B walling including straightening cleaning, cutting and bending to proper shapes and length as per details supplying and binding with 20 G annealed black wire and placing in position with proper blocks supports chairs spacers etc. complete (up to 1st floor level) details design complete. a) From Primary Producer : TATA / SAI / Esser Steel / Jindal / Shyam Steel/ RINL (ii) Super Ductile (SD) TMT Reinforcement Bars

Extra over Item 18.1.1 (a,b,c) for each subsequent floor or part thereof above first floor level.

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. b) Using other ISI marked approved brand tube

Providing and fixing stainless steel ( Grade 304) railing made of Hollow Tubes, Channels, Plates etc. including welding, grinding, buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer I – charge. (For Payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessoried such as nuts bolts, fasteners etc. will be considered)

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

WATER PROOFING OF CHAJJAS, ROOF SLABS, TERRACES, SUNKEN SLABS, SEPTIC TANK,OH TANK, RAFT SLAB IN BASEMENT, WALLS ETC. (A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

b) with aqueous emulsion having concentration 1:499 with Premise 350 SC (Imidachloprid 30.5% SC) and water, i.e. 0.07% solution.

ALUMINIUM FITTINGS : Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts i) 300mm x 16mm

ii) 250mm x 16mm

b) Tower bolts i) 300mm x 12mm

iii) 200mm x 12mm

c) Door handles iii) 150mm

m) Mortice lock vertical type iv) Aldrop with In built Lock-6 lever kadi tala(Godrej Make)

r) Curtain rod ii) 25mm x 2mm

t) Door stopper with rubber stopper

SANITARY AND WATER SUPPLY WORKS:

Providing fitting and fixing vitreous water closet squatting pan (Indian Type W.C. Orissa Pattern ) with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required (Flushing Cistern to be paid separately ) Indian Type W.C. Orissa Pattern of size 580 x 440 m i) Parryware make

Providing fitting and fixing vitreous China Pedestal Type water closet (European Type W.C. Pan 400 mm high) with seat and lead, CP brass hinges and rubber buffers, CI / MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryeare make a) White i) Universal closet S Trap (C. N C0271) (Anglo Indian (Inclusive of seat cover)

Providing vitreous China Wash Basin with CI / MS brackets, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets cutting and making good the wall wherever required (Pillar cock stop cocks waste coupling are to be paid separately) Basin (Without Pedestal) (A) Parryware Make a) White i) Star Basin 550 x 400 (C No. C0450)

Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia

Supplying, fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe union clamps etc. complete as directed and specified (Pipes will be measured separately) I) Parryware make a) White i) Economy Single Flash

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Providing fitting and fixing vitreous China flat back type lipped front urinal basin of automatic flushing cistern (A) Parryware Make a) White

Providing fitting and fixing vitreous China squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader and brass unions etc. complete including painting of fitting and brackets cutting and making good the walls & floors wherever required (A) Parryware Make i) White

Providing fitting and fixing stainless steel kitchen sink of Parryware make with CI / MS brackets, C.P Brass chain with rubber plug, PVC waste pipe etc. complete including painting the fitting cutting & making good the walls wherever required ( Sink Co . . . . . . (A) Parryware Make (i) Single Bowl wirh Veg bowl & Drain Board

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing fitting and fixing recessed soap tray / soap dish complete as directed and specified. a) Parryware make ii) Wall Sop Tray

Providing fitting and fixing CP Towel Rail complete as directed and specified. a) Jaquar Make ii) Continental 600 mm (Cat No. CAN 1111N)

Supplying, fitting and fixing PVC pipes of 6 Kg. / Cm2 (Supreme / Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches ii) 110 mm dia

iv) 75 mm dia

Supplying fitting and fixing 87.5 degree PVC bend of (Supreme / Prince ) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. ii) 110 mm dia

(iv) 75 mm dia

Supplying fitting and fixing PVC reducer of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.I. as directed and specified. a) In exposed surfaces or in trenches. iv) 110 mm x 75 mm

BIB COCK : Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body

(b) Long body bib cock with wall flange

Providing and fixing Chlorinated polyvinyle chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe. A) Exposed or in trenches c) 25 mm nominal outer dia pipe

Supplying fitting and fixing Chrome plated (CP) Stop Cock of approved brand of size as mentioned below and directed and specified (GI & CP pipes will be measured and paid separately) (I) Jaquar a) Continental / Clarion iii) 15 mm dia (Angular stop cock with long thread)

Supplying fitting and fixing C.P. Pillar Cock of 15 mm dia of approved brand as specified and directed. (II) Jaguar Make (a) Continental,

Supplying fitting and fixing overhead adjustable chrome plated (C.P.) spray shower 15 mm dia of Sona make with wall flange as directed and specified (Pipes will be measured and paid separately. b) Apex / Kiran / Priya / Star / Rim Zim / Bugle Shower with arm

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed (B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iii) 25mm diameter

iv) 32 mm diameter

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. i) Bore hole of 75mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. (II)PVC PIPE (SUPREME /PRINCE / FUSION /SFMC Brand) i) 50mm diameter

Supplying fitting and fixing ISI approved PVC filter 3.00 metre long.

Supplying fitting and fixing check valve (non return valve) including thread to pipes. iv) 50mm diameter

Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed. (vi) 40 Users

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (i) 2000 Lt capacity (a) Sintex make

Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed. (a) 2000 litre capacity

ELECTRICAL WORKS

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 2.5 sq. mm. + earth continuity with 2x1.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 3 x 4 sq. mm. + earth continuity with 2x 2.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 3 x 6 sq. mm. + earth continuity with2x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.2.1 : B Series (Schneider MG, legrand, Hager make) 16.2.1.1 : 6 to 32A

SOR 15.2: -Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.2.1 : ABB, Schneider MG, legrand, Hager make) 15.2.1.4 : 12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.8.1: ABB, Schneider MG, legrand, Hager make) 15.8.1.2: 6 way TPN (4+18) double door

Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. 27.1.6 - Standard model 1200 mm Sweep Usha make)/ Standard model 1050 / 1200 mm Sweep Havells make)/ High speed 1200 mm sweep (ORIENT PSPO mak

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. 27.2.1.3 - High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make)

Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required.

SOR 22.2: Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 50 mm dia. 3.00 Metres length corrosion free dual pipe technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and Electronic ballast / Channel type luminaries complete with bright aluminium reflector & decorative silver coloured end caps and Electronic ballast with 1 X 36 watt Fluorescent tube. (Crompton Greaves make) Model- DZL36EB DAZZLE with Super Saver Lamp/ DMLUR14EB SPARKLER with Power Lux Lamp or equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.

1.5 HP Single Phase Motor jet pump set (Horizontal(Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

CHANDRAMONI HAZARIKA

Niranjan Saikia