REPAIR/REPLACEMENT OF WOODEN AND ALUMINIUM JOINERY, PLUMBING FITTINGS PVC WATER TANK, FLOOR/WALL TILING, PVC RAIN WATER PIPES, REPAIRS TO ROOF AND PERIODICAL SERVICES AT IHQ MoD (ARMY) CAMP UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/jumper(s) etc. by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc. including replacement of major defective item if required complete all as specified and as directed.

Notes :- 1. The contractor shall make all arrangement for attending the different types of complaints to HQ MoD Camp Area on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "M&L" under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. Contractor has to provide minimum one plumber including all necessary T&P on all working days from 9AM to 5PM. Additional workers can be engaged if nature of work required to be completed within fix time frame as desired by the GE. Rate shall be quoted accordingly against these items, keeping in mind above said provisions.Any major item required to be replaced with new one, to make the system functional shall be measured and paid for seprately as 'Suppiy Only' under respective applicable item of this schedule against item . Old retrived item(s) as considered in 'Schedule of Credit' shall become property of the contractor

2. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill.

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 Sqm complete all as specified and as directed.

Taking down door/window/ventilator's chowkhat or frame with shutters (without taking off shutters from the frame n.exc 1.5 Sqm complete all as specified and as directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

S&F 2nd class 35 mm thick hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 cluse 8.24(a) complete all as specified and as directed.

S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F solid coloured PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2004 Part-II complete all as specified and as directed.

S&F 100 mm size butt hinges medium weight stainless steel complete all as specified and as directed.

S&F in repair 18/19mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium window frame / wooden doors or steel section windows complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section and fixed complete all as specified and as directed.

S&F aluminium handles, 150 mm size, Fabricated type complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolts of 250 mm long with hasp,staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section and fixed complete all as specified and as directed.

S&F door closer (die cast) body hydraulically regulated designation No.3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F brass mortice lock vertical type 6 lever of size 100 mm to 120 mm long with handle including taking down old mortice lock complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and as directed.

S&F powder coated aluminium frame for partitions,doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F aluminum powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m incl necessary jointing cleats, glazing clips rubber neoprene packing including:- (a) 150mm handle-02 Nos. (b) Stainless steel hinges 100mm-03 Nos (c) Mortice lock in built 3 lever-01 Nos in each shutter, alum anodized snap beading screw etc. complete all as specified and as directed. Note:-Glass & particle board shall be paid measured and separately.

S&F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and as directed.

S&F in repairs 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing complete all as specified and as directed.

M&L preparation of new untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and as directed.

S&F hasp and staple, 75mm size safety type,stainless steel including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable to store and rabbish off the premises complete all as specified and as directed.

Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 100mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings complete all as specified and as directed.

M&L for non Skid ceramic tiles 7 to 8mm thick coloured (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed coloured ,joint free ceramic tiles in vertical surface of size 450X300X7mm thick, over and including 10mm thick rendering in CM 1:4 as in backing set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed coloured ,joint free ceramic tiles in vertical surface of size 300X200X7mm thick, over and including 10mm thick rendering in CM 1:4 as in backing set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for light shed Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and as directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including moulding as required and like in cement mortar (1:4) laid over and including 15mm thick screed bed in CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F machine cut kota stone slab flooring 20-25 mm thick laid over and including 20 mm thick cement screed base 1: 6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling complete all as specified and as directed.

M&L for 15mm thick cement plaster cement mortar (1:4) on fair faces of briick or concrete surfaces, finished fair & even without using extra cement complete all as specified and as directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperature 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas,fins, facias, parapets, Lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 2 storey bldgs including finishes as existing complete all as specified and as directed.

M&L for preparation of new wall surfaces by complete removal of existing treatment and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make complete all as specified and as directed.

M&L for complete removal of existing treatment of old treted surface and applying two coats of distemper oil emulsion over water based primer with 3 mm thick JK wall putty on wall surfaces complete all as specified and as directed.

M&L for prepapring old plastered surfaces and applying a coat of white wash on wall complete all as specified and as directed.

M&L for prepapring old plastered surfaces and applying a coat of white wash on ceiling complete all as specified and as directed.

M&L for applying two coats of cement base paint, white or tinted on old wall plastered surface including preparation of surface complete all as specified and as directed.

M&L for of new plastered surface and applying two coats of distemper oil emulsion over water based primer with 3 mm thick JK wall putty on wall surfaces complete all as specified and as directed.

M&L for preparing of old surfaces of ceiling and applying two coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparing of new surfaces of ceiling and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed.

S&F in repairs wash hand basin vitreous China flat back 550x450mm size white, including PVC waste coupling 32mm size, pair of brackets of mild steel 35 x 35 x 6mm size including complete all as specified and as directed.

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) long pan fixed size 580x440mm white with integral footrest with `P' or `S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan EWC (pedestal pattern) p or s type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs Pillar taps fancy type cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs, 15 mm bore, Wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs PVC connection for 15 mm bore pipe,450mm long complete all as specified and as directed.

S&F in repairs 32/40 mm bore and 750mm long PVC Waste pipe suitable for WHB/Sink/Urinal complete all as specified and as directed.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs, PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity, low level, white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed.

S&F in repairs 15mm brass chromium plated fancy type bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and as directed.

S&F in repairs 15 mm brass angle valves (fancy type), cast copper alloy , chromium palted, screwed down high pressure witg crutch and butter fly handles, screwed with iron pipes or for union complete all as specified and as directed.

S&F in repairs brass Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs brass CP swiral shower rose of size 100/125mm with arm including fixing to steel pipes complete all as specified and as directed.

S&F in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and as directed.

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and as directed.

S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs complete all as specified and as directed.

S&F in repairs Corner glass shelf 8-10 mm thick 300X200/ 400x200 with 'D'/F type brackets complete all as specified and as directed.

S&F in repairs CP Urinal spreaders complete all as specified and as directed.

S&F in repairs Aluminium alloy door cills having rubber strips in bottom, fit to door size complete all as specified and as directed.

Cutting chases for concealed water tubing or concealed conduct and making good cutting n.exc 10 cm in girth in brick wall complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and as directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (wall, ceiling, floor etc) complete all as specified and as directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (wall, ceiling, floor etc.) complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed complete all as specified and as directed.

Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC/Brick work complete all as specified and as directed for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and as directed. for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

S&F in repairs, cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and as directed for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

S&F in repairs CI Bends (any radius), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified and as directed.

S&F in repairs CI Bends (any radius), diminishing pieces or tapers of 75 mm dia fitted without oval access door complete all as specified and as directed.

S&F in repairs Cast iron branch pieces, Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with cement joints, fitted with oval access doors complete all as specified and as directed.

S&F in repairs Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore with cement joints, fitted with oval access doors complete all as specified and as directed.

S&F in repairs 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm complete all as specified and as directed.

S&F in repairs Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete all as specified and as directed.

S&F in repairs Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for75mm bore pipes complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm including taking down old rain water pipe complete all as specified and as directed.

S&Fin repairs PVC (SWR) pipes 75mm bore size single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius, of 110mm bore size complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius,with threaded type door eye of 110mm bore size complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius, of 75mm bore size complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius, with threaded type door eye of 75mm bore size complete all as specified and as directed.

Dismantling water tanks exc 500 but n.exc 2000 Litres capacity complete all as specified and as directed.

S&F rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F rotational moulded water storage tank 2000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repairs 20 mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs gun metal globe or gate valve for 15 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs gun metal globe or gate valve for 20 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs galvanised iron tank nipple 15mm bore suitable for HDPE water tank complete all as specified and as directed.

S&F in repairs Stainless steel sink made out of 1 mm thick sheet of overall size 495x420mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and as directed.

S&F in repairs Stainless steel sink with drainage board made out of 1 mm thick sheet of overall size 915x460mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and as directed.

Cutting of shrubs/bushes and small plants/vegetation including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and as directed.

Demolition of brick work built in CM incl quoins, arches, pillers etc. complete all as specified and as directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed.

Demolition of existng brick tiles or terracing tiles, single layer on roofs, bedded, jointed and pointed in any mortor complete all as specified and as directed.

Demolition of lime concrete/ Mud in roofs, any thicknes, including plastering and leeping (whether full thickness removed or only or part thereof) complete all as specified and as directed.

M&L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified and as directed.

M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement (Water proofing compound shall be measured and paid seperately) complete all as specified and as directed.

M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-

(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.

(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).

(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.

(e) Make of APP : "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.

Note:- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

M&L for preparation of new surface of APP memebrane sheet and applying two coats of aluminium paint over a coat of primer complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1, using 20 mm graded stone aggregate as in benching, roof kerbs and similar work rounded or chamfered complete all as specified and as directed.

Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railings frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 complete all as specified and as directed.

S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1, using 20 mm graded stone aggregate as on roof padding to maintain the slope complete all as specified and as directed.

S&F in repairs Steel rolling shutters 1.25mm th, without ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer;erected in position as indi?cated, complete: push pull or manual type but gear operated type with bevel gear box and crank handle complete all as specified and as directed.

M&L for repairs to steel rolling shutters and gear box in any size and any types including greasing, oiling and smooth functioning of the shutters (hight upto 5.00 mtrs) complete all as specified and as directed.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F in replairs Ball bearing for rolling shutters complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

A N BUILDERS

SABHARWAL CONSTRUCTION CO.

PG CONSTRUCTION AND COMPANY

VED PRAKASH ARORA

M/S Parmod Johar

P R Constructions