CE / MTPS-I /SE / ES/ EM-I/OT.NO.12 / 2021-2022

Amount

Charges for releasing the Instrument Air /Service Air Compressor motor – 90 KW, Air Washer Fan Blower motor – 55 KW, TLCBP/HCBP motor – 37/39 KW, from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with Compressor.

Charges for complete overhauling of motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling.(Bearings will be supplied by TANGEDCO)

Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces on DE and NDE sides, checking of bearing housings, providing sleeves in the end covers on DE & NDE sides in Instrument Air Compressor motor (if necessary)

Charges for complete overhauling of Air Washer Blower Fan motor -55 KW including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling. (Bearings will be supplied by TANGEDCO)

Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings, providing sleeves in the end cover of one side for 55 KW Air Washer Blower Fan motor. (if necessary)

Charges for complete overhauling of TLCBP/HCBP 37/39 KW motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling. (Bearings will be supplied by TANGEDCO)

Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings, providing sleeves in the end cover of one side (if necessary)

Charges for disconnecting the power cable,releasing the Air Washer Circulating Water Pump motor - 30KW from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor, reconnecting the power cable and including coupling, alignment and coupling the motor with the pump

Charges for complete overhauling of Air Washer Circulating Water Booster Pump motor-30KW including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling. (Bearings will be supplied by TANGEDCO)

Charges for disconnecting the power cable, releasing the Centrifuge - 5.5KW motor from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor, reconnecting the power cable and including coupling, alignment and coupling the motor with the pump

Charges for complete overhauling of motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling. (Bearings will be supplied by TANGEDCO) pump

Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings, providing sleeves in the end cover of one side (if necessary)

Charges for disconnecting the power cable, releasing the Oil Vapour Exhaust Fan – 1.5 KW motor from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor, reconnecting the power cable and including coupling, alignment and coupling the motor with the pump.

Charges for complete overhauling of OVEF IA, IB & IC motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling. (Bearings will be supplied by TANGEDCO)

Charges for Painting with 2 coats of 16 nos. motor for various capacities.

Material charges for End Sleeves for DE/NDE covers for 90 KW motor. (if necessary)

Material charges for End Sleeves for DE/NDE covers for 55 KW motor. (if necessary)

Material charges for End Sleeves for DE/NDE covers for 39/ 37 KW motor. (if necessary)

Material charges for End Sleeves for DE/NDE covers for 30 KW motor. (if necessary)

Material charges for End Sleeves for DE/NDE covers for 5.5/1.5 KW motor. (if necessary)

Smoke Grey enamel Paint (for 90 KW-1 Lit/each motor (4 Nos.), 55 KW-1/2 Lit/each motor (1 No.), 37/39 KW -1/2 Lit/each motor (3 Nos.), 30 KW – ½ Lit/each motor (3 Nos.) & 5.5 / 1.5KW-1/4 Lit/each motor (5 Nos.)

Dr.Becktal Varnish (for 90 KW-1 Lit/each motor (4 Nos.), 55 KW-1/2 Lit/each motor (1 No.), 37/39 KW -1/2 Lit/each motor (3 Nos.), 30 KW – ½ Lit/each motor (3 Nos.) & 5.5 / 1.5KW-1/4 Lit/each motor (5 Nos.)

MS Bolt & Nuts (for 90 KW-1/4 Kg/each motor (4 Nos.), 55 KW-1/4 Kg/each motor (1 No.), 37/39 KW -1/4 Kg/each motor (3 Nos.) & 30 KW – 1/4 Kg/each motor (3 Nos.)

Cost of consumables for 16 Nos LT Motors (various capacities) LS