REPAIR TO MANGLORE TILES ROOF, REPAIRS TO EAVES BOARD VALLEY GUTTERS AND CERTAIN MISC B/R WORKS IN OTM ACCN AT CME UNDER GE (CME) KHADKI

Amount

Dismantling tiling of single layer Mangalore Pattern roof tile laid dry complete all as specified and directed

All as per item No 01 above but bedded in lime or cement mortar complete all ,as specified and directed.

M&L for roof tiles, Mangalore Pattern, interlocking at side joints laid dry complete all as specified and directed.

All as per item No 03 above but except tile complete

M&L for ridge tiles, Mangalore Pattern, set and jointed in CM 1:6 complete all as specified and directed.

All as per item No 05 above but except Mangalore Pattern ridge

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spacing exc 15 cm complete all as specified and directed.

M&L 2nd class hardwood clean sawn battens at 30cm centres of sectional area exc 5 & n.exc 15 sqcm complete all as specified and directed.

All as per item No 08 above but except battens

Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete

M&L second class hard wood clean sawn in scantling fixed in framed work complete all as specified and directed.

M&L for preparing the surfaces of tiles battern any size and spacing prepared and treated all over (measured overall on one side only),spaces not deducted with two coats of cresote oil complete all as specified and directed.

All as per item No 12 above but one coat on old batter surface

M&L for preparing new surface of wood of any decription, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all, as specified and directed.

Dismantling boarding , any description in any position with nails complete

M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

S&F Framed work such as roof trusses(framed), trusses purlins, crane gantries , rails and fastenings and heavy bracket framing(beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed.,

Dismantling of wrought iron or mild steel work of any description

S & F for 1.25 mm thick plain, galvanised ,mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed ) with grade of zinc coating 275 etccomplete all as specified and directed

S&F 0.50 mm thick CGI sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, walls etc including dismantling of existing sheet of any description complete all as specified and directed.

S&F 0.50 mm thick plain, galvanised , mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing(length and girth as fixed) with grade of zinc coating 275 including dismantling of existing shteet complete all as specified and directed.

M&L for removing of trees any size alongwith grass roots from surroundings of water storage tanks by manually with the help of sharp tools and filled up small holes with PCC (1:2:4) Type B0 (12.50mm graded stone aggregate) finished surface even and smooth without using extra cement complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved .

Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as spd.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for cleaning roof surfaces/valley gutters by removing bushes, leaves, grass etc Note: 1) Work to be carried out at approximate 10-12 mtr height all as specified and directed. 2) The rate shall be quotted by the contractor including scafolding to carry out the work for height more than 10.00 mtrs.

BSK Construction (BID ID -3159929)

SAI TILES ARTS (BID ID -3149584)