Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.8 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 and as per decision of CWC-I | |
| 2 | L-2₹16.0 L+₹14,870 (0.94%)Rejected-Finance | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹16.1 L+₹22,730 (1.44%)Rejected-Finance | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹18.9 L+₹3.1 L (19.6%)Rejected-Finance | L-4 | Rejected-Finance Being L-4 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
24 Jul 2024, 6:00 pmClosed
GM OEF KANPUR
Ordnance Equipment Factory, TCL Kanpur P.B. No. 76, Phool Bagh, Kanpur-208001, Phone No. 05122311181 Fax No. 05122311186 HR731013 Phone No. 05122311181 Fax No. 05122311186
Repair or Strengthening of RCC Chajjas,Roof treatment and other misc. Civil Work in BD Ghat Colony in OEF Estate
2024_TCL_201013_1
CW/TE/E-Proc/27/OEF/EO/2024-25
Open Tender
Civil Works
Works
180 days
OEF KANPUR
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹50,000
4 Oct 2024
10 Jul 2024
26 Jul 2024
10 Jul 2024
24 Jul 2024
10 Jul 2024
Amount
Demolition of reinforced cement conctrete like Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.
Formwork of fair finished surfaces to soffits of suspended slabs such as chajjas, roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) including cutting holes etc .
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades/chajjas, shelves, lintels, etc. and making good, cutting not exc 10 cm but not exc 20 cm girth.
M&L Mild Steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns beams, hooking ends and binding with and including mild steel wire(annealed)not less than0.9mm dia or securing with clips. Make:Tata/Jindal/SAIL .
M&L Reinforced Cement Concrete Type B0 1:2:4 (12.5mm graded aggregate) in Chajjas . Mixture must be prepared by Concrete Mixer machine/truck. Cement Make:Ultratech/Ambuja/ACC/Birla
M&L Finishing top layer of cement concrete surface of chajjas even and smooth with using extra cement.
Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces of wall, after brushing neat cement slurry with 3.0kg of cement per Sqm , finished even and smooth (without using extra cement) Cement Make:Ultratech/Ambuja/ACC/Birla
M&L Priming plastered and other surfaces with alkaliresistant priming paint. Make:-Indigo/Asian, Adarsh/ Gillden/Amar/Sunshine/Berger/Nerolac/Shalimar
M&L Preparing new or previously untreated wall surfaces and apply two coat of Cement Paint. Make:-Indigo/Asian, Adarsh/ Gillden/Amar/Sunshine/Berger/Nerolac/Shalimar
M&L Preparing old painted wall surfaces and apply two coat of Cement Paint. Make:- Indigo/Asian/Adarsh/ Gillden/Amar/Sunshine/Berger/Nerolac/Shalimar
M&L prepairing old steel surfaces and applying two coats synthetic enamel paints. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon.
Demolition & dismantling of brick work built in cement mortor.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar. Cement Make:Ultratech/Ambuja/ACC/Birla
M&L Broken bricks Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
M/L Brushing neat cement slurry and 55 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) and finished even and smooth with extra cement in floor finishes. Cement Make:Ultratech/Ambuja/ACC/Birla
Disconnecting existing tanks (exc 250 & n exc 500 litres) , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including pipe and fittings .
S&F Fe-410- W(Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Make:TATA/Jindal.
S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members.
Removing building materials etc. to a distance of 3 Km including loading and unloading.
B.S. CONSTRUCTIONS
AJS CONSTRUCTION
M/S M. L. CHATURVEDI & SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .