Renvation of Kothi No. 16 at Canal Colony Cantt Road Lucknow

Amount

Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m.

Scraping old white or colour wash including disposal of refuse as directed by Engineer- in- charge with in a distance of 60m.

Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismentled materials as directed by the Engineer -in-charge with in a distance of 60m.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 metres (200ft.)

Dismantling doors & windows, Chaukhats with hold fast & including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 metres (200ft.) (PWD SOR Ch. 17 Item no. 703)

Dry earthwork in foundation including disposal and bacck filling with all cost of labour material and T&P etc.

P/L PCC 1:3:6 in with cement coarse sand and 12-20 mm guage approved stone ballast including all material, labour and T&P etc. complete.

P/L in position RCC in 1:1.5:3 with cement, Coarse sand and 12-20mm guage stone grit including cost of all material, Labour T&P etc. complete in all respect.

Reinforcement work with bending, binding, cutting, and placing in position reinforcement including cost of binding wire with all cost of labour material and required T&P etc complete.

Centering and shuttering for RCC work including rent of shuttering and all cost of labour material and T&P etc reequired for proper completion of the work.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws UPPWD SOR Ch. 11, 9.21.1

P/F 40mm thick C.P. Teak wood door & window shutter of heavy quality SS mosquito proof jali with necessary beedingexcluding fixing fixing of all fixture but including their cost of all material T&P et.

M-150 brick work in 1:4 cement & coarse sand mortar for 3 M height & lead up to 60 M including cost of all Materail Labour & T&P etc for proper completion of work.

12 mm cement plaster in single coat on fair side of single/ both side or half brick wall for exterior/ exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 4 coarse sand (a) Providing and fixing water proofing materials in cement mortar for plastering or in concrete work in the proportion recommended by the manufacturer.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete. size of tile 600x600mm

Cement Concrete flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc . Complete. 40mm thick with 20mm nominal size stone aggregate.

Providing and applying plaster of putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work. (Ist quality Royal, Silk) Asian, Berger. PWD SOR Ch. No. 15 S.I. No. 13.80

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials ,labour, T&P etc required for proper completion of work .(Paint to be used should conform to the ISI no -103-1950.)

Finishing walls with acrylic smooth exterior paint of required shade : new work (Two or more coats applied @ 1.43@ ltr/10sqm over and including priming coat of exterior primer applied @ 2.2 Kg/10Sqm)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :

Dismantling existing mortar/plaster over roof including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meter.

12mm cement plaster in sigle coat on top of slab in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc.

Providing and laying 40mm thick 1:2:4 cement coarse sand and stone ballast 6.7mm nominal size with Murga Jali including all material, Labour,T&P and curing complete over the APP sheet.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre moulded and pre polished, mechine cut for Kitchen Plateform, Vanity counter window sill facia and similer locations of required size approved shade , colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand) joints treated with white cement, mixed with matching pigmant, epoxy touch ups, including rubbing , curing, moulding, and polishing to edges to give high glass fininsh etc. complete at all level. Granite of any colour or any shade.

P/F 15 mm dia G.I. pipes complete with G.I fittings and clamps, i/c cutting and making good the walls etc.

P/F concealed G.I. Pipes class B complete with fitting & clamps, including cutting and making good the surface of walls etc. complete. (Internal works)

P/F 600x460 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers.

P/F P.V.C. waste pipe for sink and wash basin including cost of all material, labour, T&P etc.

P/F wash basin with single hole /number of holes for pillar tap with C.I or M.S. brackets painted white including cutting hole & making good the same but excluding fittings.

P/F 20 mm dia G.I. pipe complete with G.I fittings and clamps, i/c cutting and making good the walls etc.

20 mm dia nominal

S/F 500 mm diameter C.I cover with out frame for Man holes.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

P/F stainless steel kitchen sink with C.l. Bracket excluding cost of other fittings.

Kitchen sink without drain board size 240x510x178

P/F 15 mm Nominal hole size C.P. Pillar each cock

P/F 10 Lit. low level P.V.C. cistern of standard approved make complete with all accessories and fittings.

P/F in position C.P. brass towel rail complete with brackets including making chases in walls and repairing the same in 1:3 CM complete.

Providing and placing on terrace (at all floor levels) polyethylene water strorege tank ISI:12701 marked with over and suitable locking arrangement an making necessary holes for inlet, out let and over flow pipes but with out fittings and the base support for tank.Rate as per D.S.R Item 18.48A

Wiring point for exhaust fan in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed conduit) and 15 Amp flush type switch & ceiling rose fixed with 3 mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over the existing M.S. box/ Junction box required for proper completion of the work as directed at site by the Engineer in charge.

Wiring point for light with 1.0 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash.

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. (UP Elec. PWD SOR Item No. 131 C)

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. (UP Elec. PWD SOR Ch 1 Item No. 1139 B)

S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. (UP Elec. PWD SOR Item No. 1027 CAT B)

Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc., complete in all respect including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated copper conductor cable as earthwire drawn inside the conduit. (UP Elec. PWD SOR Item No. 135 C)

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire, complete in all respect. but in 20mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit. (UP Elec. PWD SOR Item No. 211 C)

Supply and wiring of submain with two number 6 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire etc., complete in all respect but in 25mm dia heavy duty (2mm thick) PVC conduit with one number 4 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. (UP Elec. PWD SOR Item No. 212 C)

S&F of 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. (UP Elec. PWD SOR Item No. 327 C)

Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) (UP Elec. PWD SOR Item No. 725 D) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

m/s mohd. zamil