Loading
Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹5.1 L
Closing Date
7 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
ELECTRICAL
21 conditions · 9 needing a document upload
Financial Eligibility Criteria: The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where, V=Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ Audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India. No Technical and Financial credentials are required for tenders having value up to Rs. 50 lakhs. For tenders costing more than Rs. 20 crore, eligibility criteria include bid capacity also as specified in Clause 10.3 of IRSGCC April 2022-PART-I, "Regulations for Tenders and Contracts - For the Guidance of Engineers & Contractors for Works Contracts." The tender/technical bid will be evaluated based on bid capacity formula detailed in Proforma 2 of Proforma set. The tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of he present tender.
In support of Financial Eligibility Criteria: The tenderers shall submit requisite information as per Annexure-VIB, vide para 10.2, Part I of GCC 2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
FILLING OF RETURNS REGARDING GST : "The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email ID). In case of a contract award, a copy of the LOA / Purchase order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officers mentioned in the Tenderer's bid"
1. The tenderer should have valid electrical contractor license of Super Grade Electrical Contractors License or upto 66 kV and above issued by recognized electrical contractor licensing authority of state Govt./Central Govt.
A) Technical eligibility criteria for non-composite works costing above Rs.50.00 lakhs as per clause 10.1(a) of IRGCC-2022 (part-1): (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, Or 2.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender or 3.One similar work each costing not less than the amount equal to 60% of advertised value of the tender. The technical eligibility for the work as per para 10.1 above, shall be satisfied by either the JV in its own name & style' or 'Lead member of the JV'. Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for the work as per para 10.1 above, shall have technical capacity of minimum 10% of the cost of work i.e., each non-lead member of JV member must have Satisfactorily completed or substantially completed during the last 07 (seven) years, ending last day of month previous to the one in which the tender is invited, one similar single work for a minimum of 10% of advertised value of the tender. B) Technical eligibility for composite tender: 1. Each component of value more than 2 Crs shall be taken for evaluation of technical eligibility as per 10.1(b) of IRSGCC-2022. 2.In case single completion certificate containing more than one component is submitted by the tenderer, value of each component is to be specified in that completion certificate. Separate completed works of minimum required values for each component shall also be considered for fulfilment of technical eligibility criteria 3. In case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility, the certificate shall be treated Incomplete and invalid and shall not be considered for evaluation of technical eligibility. The technical eligibility for major component of work as per para 10.1 above, shall be satisfied by either the 'JV in its own name & style' or 'Lead member of the JV' and technical eligibility for other components of work as per para 10.1 above, shall be satisfied by either the 'JV in its own style' or 'any member of the JV'. Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for any component of the work as per para 10.1 above, shall have technical capacity of minimum 10% of cost of any component of work mentioned in technical eligibility criteria. i.e., each other (non-lead) member must have satisfactorily completed or substantially completed during the last 07 (Seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum of 10% of cost of any component of work mentioned in technical eligibility criteria. Note: a) The Major component of work for this purpose shall be the component of work having highest value. In cases where value of two or more component of work is same, any one work can be classified as Major component of work. b) Value of completed work done by a member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above-mentioned technical eligibility criteria in the tender under consideration
A) If the Tenderer proposes to subcontract any component/components as per item 4 above, which is less than 50% of tender value, then a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the sub-contractor(s) and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility as per clause 7(a)(ii) of Part II of IRSGCC 2022. B) For component less than Rs 2 Cr, technical Eligibility will not be considered in tender evaluation and the documents of sub-contractor need not be submitted along with tender. C) The contractor will engage an eligible sub- contractor after award of contract with the approval of Chief Engineer in writing subject to complying clause 7 of Part II of IRSGCC 2022. Note: a) Tenderers may see Explanation for Para 10 of the Tender Form (Second Sheet) including Para 10.1 to 10.5 - Eligibility Criteria of IRSGCC-2022. b) The Experience Certificates are to be attached to the e-offer as per Proforma - 1.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to 2.1.1 issue such certificates. The work executed by the tenderer for any Govt./Govt. bodies/PSUs and public listed company shall only be considered for fulfilling of Technical Eligibility Criteria. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work Experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2022.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on subcontracting to contractors from such countries as per clause- 27 of SCC 2022.
Definition of Similar Work :-Stringing (including design supply as applicable ) of 66kV and above rating transmission lines including erection of transmission towers and foundation work for SEBs/DISCOMs/Transmission authorities /PGCIL/NTPC OR Provision (design, supply, erection, testing and commissioning) to substation involving 25kV/ 33kV/ 66kV/ 132kV/ 220kV and higher voltage switchgear equipments, control and protection equipments, reactors, power factor correction equipments etc or transformers of 12.5MVA/21.6MVA/ 30MVA and higher capacities executed for Railways or any other SEBs/PGCIL/NTPPC/DISCOMs etc with or without supply of transformers & associated switchgear equipments.
109 conditions · 16 needing a document upload
Uploading of Form 16A/26AS generated through TRACES of Income Tax Department of India, if Client certificate is from other than Govt. Organization
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India .
Uploading of scanned copy of work experience certificate issued by public listed company, copy of work order, bill of quantities, bill wise details of payment received duly certified by charted accountant, TDS certificates for all payments received and copy of final/last bill paid by company etc. as per Note for clause10.1 of IRGCC-April-2022
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as per clause 7, Part-II of IRSGCC-2022, in case the main tenderer proposes execution of any of components mentioned in tender through subcontractor in a composite work as specified in clause 10.1 (b)(3) of IRSGCC- April-2022.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2022.
Uploading a scanned copy of Registration Certificate by Start- up firms issued by appropriate authority and recognized by Department of Industrial Policy and Promotion (DIPP) towards exemption of full Bid security and Registration Certificate with registration number by Labour Co-operative Society issued by appropriate authority for payment of 50% Bid security
Have you attached the digitally signed copy of tender document
Uploading of required documents in case of Individual or propriety firm / concern or partnership firm or company or joint venture firm / HUF / Society / LLP etc., as mentioned in technical compliance (which ever is applicable)
Uploading of Scanned copy of the declaration regarding employment of Retired Engineer / Retired Railway Officer (as per Pro forma - 6 of Proforma set).
Uploading of Proforma (Proforma-9 of Proforma set) attached with Tender Document for self- Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores
Uploading of (Proforma-10 of Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores
Uploading of Scanned copy of Bid capacity (as per Annexure II of Part I, Chapter I of Tender document (Pro forma - 2 of Proforma set)) and in terms of clause 10.3 & 10.5 of IRSGCC- April-2022
Uploading of Scanned copy of Statement of payment received in the Last three financial years and the current financial year (as per Pro forma- 2A) along with copies of relevant supporting documents as stipulated.
Uploading of digitally signed copy of the details of construction machinery, Tools and plants, Vehicles etc. in Proforma 3.
Proforma 5 of Proforma set: Have you submitted Proforma 5 of Proforma set i.e., Bank details in the proforma to facilitate epayment via NEFT/RTGS etc.
Annexure I of Part I, IRSGCC 2022 (Offer Letter): Have you submitted Offer Letter i.e., Annexure I of Part I, IRSGCC 2022 with details of reporting of employment, mobilization advance and LC arrangements if any.
Uploading a scanned copy of the Memorandum of Understanding in the case of a JV firm (Proforma 7 of Proforma set).
Uploading a scanned copy of Standard Format for Certificate Annexure V and V(A) as per IRSGCC-April-2022 and Advance Correction Slip No. 1, 2, 3, 4, 5, 6, 7, 8, 9 & 10 to IRSGCC-April- 2022 linked under heading submission of Standard Format for Certificate. This certificate is to be given by each member of JV or Partnership firm/LLP/etc.
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part-I. (iii)All other documents as per Clause 14 of IRSGCC-April- 2022-Part-1
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of partnership deed or a copy of partnership deed registered with registar . (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract (iv)Other documents as mentioned in terms of para 10 tender form (2nd sheet) of IRSGCC April-2022- Part I. (v) All other documents as per Clause 14 and Clause 18 of IRSGCC - April -2022- Part 1. Conditions as per IRSGCC April 2022 & ACS.2 , as amended from time to time is applicable.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: (A) In case one or more of the members of the JV is/are Partnership firm(s): (1) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (2) A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (3) A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (4) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were/are partners/members. Any Concealment/wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (B) In case one or more members is/are HUF: (1) A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (C) In case one or more members of the JV is/are Companies: (1) A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (2) A copies of MOA (Memorandum of Association)/AOA (Articles of Association) of the company (3) A copy of Certificate of Incorporation (4) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s: (1) A copy of LLP Agreement (2) A copy of Certificate of Incorporation of LLP (3) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement (4) A copy of Authorization/copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (5) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. Any concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E) In case one or more members of the JV is/are Society/s or Trust/s: (1) A copy of Certificate of Registration (2) A copy of Memorandum of Association of Society/Trust Deed (3) A copy of Rules & Regulations of the Society (4) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii)All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022. (iv) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.Conditions as per IRSGCC April 2022 & ACS.2 , as amended from time to time is applicable.
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part-I. (vi) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.Conditions as per IRSGCC April 2022 & ACS.2 , as amended from time to time is applicable.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part I. (v) All other documents as per Clause 14 of IRSGCC-April-2022-Part I.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected.
Proforma-9 of Proforma set for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per clause 23.8(a) of Special Conditions of Contract).
Proforma-10 (Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per clause 23.8(b) of Special Conditions of Contract)
Scanned copy of Statement of Bank details, PAN & GST as per Pro forma 5 of Proforma set.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Any other document required for evaluation of his/ their bid as deemed fit by the tenderer.
Uploading of Scanned copy/copies of formal agreement duly executed and notarised by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Design, Supply, Construction, Testing and Commissioning of : (i)1 no. of 66kVTerminal Bay at 220/66kV Chintamani Sub-station (ii)66 kV 630Sqmm Single Circuit UG Cable from 66kV/11KV Chintamani S/S to 220/66kV Chintamani Sub- station for a route length of 0.030 km. (iii)66kV line from 66kV Chintamani S/S to 220kV Chintamani Sub-station for a route length of 0.150 km
PROJECT-SWR-TL-CMY-30MVA
PROJECT-SWR-TL-CMY-30MVA
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹5.1 L
7 May 2026
13 Apr 2026
23 Apr 2026
289 items across 10 schedules · ₹4,28,340 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of SF-6 Gas circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-metallic terminal connector complete suitable for Drake ACSR and mounting structure. (auxiliary supply shall be suitable for 220v dual supply) 66KV, 1250 A, 40KA Class for 66kV line as per KPTCL approved drawing | Numbers | 1.00 | 8,29,551.8 | 8,29,551.8 |
| 2 | Supply of Isolators including marshalling box and suitable terminal connectors as required as per technical specification/as per KPTCL approved drawing with solid core cylindrical post insulators. 1) 66 kV, 1250 A, 31.5 KA class double break Motor operated isolators with terminal connector suitable for DRAKE ACSR a)Upright mounting type with manually operated Earth switch LPH 4250mm | Numbers | 1.00 | 3,42,672 | 3,42,672 |
| 3 | Supply of Isolators including marshalling box and suitable terminal connectors as required as per technical specification/as per KPTCL approved drawing with solid core cylindrical post insulators. 1) 66 kV, 1250 A, 31.5 KA class double break Motor operated isolators with terminal connector suitable for DRAKE ACSR b)Upright mounting type without Earth switch. LPH 5500mm | Numbers | 2.00 | 2,98,410 | 5,96,820 |
| 4 | Supply of Isolators including marshalling box and suitable terminal connectors as required as per technical specification/as per KPTCL approved drawing with solid core cylindrical post insulators. 1) 66 kV, 1250 A, 31.5 KA class double break Motor operated isolators with terminal connector suitable for DRAKE ACSR c)Upright mounting type without Earth switch. LPH 4250mm | Numbers | 1.00 | 2,91,271.2 | 2,91,271.2 |
| 5 | Supply of Isolators including marshalling box and suitable terminal connectors as required as per technical specification/as per KPTCL approved drawing with solid core cylindrical post insulators. 1) 66 kV, 1250 A, 31.5 KA class double break Motor operated isolators with terminal connector suitable for DRAKE ACSR d) Under hung mounting type without Earth switch. | Numbers | 1.00 | 3,08,404.8 | 3,08,404.8 |
| 6 | Supply of Current transformer including marshalling box Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per KPTCL approved drawing. i) 66 kV class, 31.5 KA, CT of ratio 400-200/ 1-1-1A , Type- 3D required for Tr. Lines For metering : Accuracy 0.2, Burden 10 VA For backup protection : Accuracy 5P20. Burden 30 VA For differential /Distance protection PS class knee point voltage 1600V, Rct-6ohms at 400/1A | Numbers | 2.00 | 1,15,651.8 | 2,31,303.6 |
| 7 | Supply of Single phase, oil filled, outdoor type Voltage Transformer with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification/as per KPTCL approved drawing. 66 kV/3 / 110 V/3 - 110 V/3 - 110 V/3 Core-1 Metering-10VA ,Accuracy 0.2 Core-2 -Protection-10VA,3P, Core-3-Protection-Open delta ,50VA,accuracy 3P | Numbers | 2.00 | 1,17,079.6 | 2,34,159.2 |
| 8 | Supply of SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type, as per technical specification/as per KPTCL approved drawing i)60 kV, 10 KA, class - III Remarks: Surge Arresters are with Surge Monitors and Insulating Base | Numbers | 3.00 | 39,978.4 | 1,19,935.2 |
| 9 | Supply of Duplex type control and relay panels complete as per specifications/as per KPTCL approved drawing a) 66 kV Panel for UG Cable/OH Line (less than 5 km) - Type 6L (As per Annexure RPP4-Cable-SAS) for UG cable/OH line (less than %km)(as per specification) Note : 1) proposed C&R Panel and associated panels shall beinterfaced with existing KPTCL RTU and shall match with exisitng panel in respect of dimensions, mimic etc.) 2) The DLMS protocol Electronic Tri Vector meter with ABT features has to be provided both on the HV side and LV side of C&R Panel. | Numbers | 1.00 | 18,00,455.8 | 18,00,455.8 |
| 10 | Supply of 66KV side Station structures as per KPTCL approved drawing a)Station Structure Tower with peak (verticals 6T3) (0.865 MT) | Numbers | 2.00 | 1,52,891.29 | 3,05,782.58 |
| 11 | Supply of 66KV side Station structures as per KPTCL approved drawing b)Station Structure Tower without peak (verticals 6T2)(0.732 MT) | Numbers | 2.00 | 1,29,775.34 | 2,59,550.68 |
| 12 | Supply of 66KV side Station structures as per KPTCL approved drawing c)Station S t r u c t u r e beams(6B3)suitable for fixing under hung isolator (0.555MT) | Numbers | 1.00 | 99,655.64 | 99,655.64 |
| 13 | Supply of 66KV side Station structures as per KPTCL approved drawing d)Station Structure beams(6B2) without under hung isolator (0.417MT) | Numbers | 1.00 | 75,175.36 | 75,175.36 |
| 14 | Supply of 66KV side Station structures as per KPTCL approved drawing e) Lighting Mast (appx 2.812MT) | Numbers | 1.00 | 4,71,299.43 | 4,71,299.43 |
| 15 | Supply of GI MOUNTING STRUCTURES including Bolts & Nuts as per KPTCL approved drawing a) 66 kV Isolator Live point height 5500mm . (0.626 MT per Structure) | Numbers | 2.00 | 1,04,781.57 | 2,09,563.14 |
| 16 | Supply of GI MOUNTING STRUCTURES including Bolts & Nuts as per KPTCL approved drawing b)66 kV Isolator Live point height 4250mm . (0.475 MT per Structure) | Numbers | 2.00 | 79,519.11 | 1,59,038.22 |
| 17 | Supply of GI MOUNTING STRUCTURES including Bolts & Nuts as per KPTCL approved drawing c) 66KV Current transformer (0.151 MT per Structure) | Numbers | 2.00 | 25,343.06 | 50,686.12 |
| 18 | Supply of GI MOUNTING STRUCTURES including Bolts & Nuts as per KPTCL approved drawing d)66KV Voltage transformer (0.151 MT per Structure) | Numbers | 2.00 | 29,012.12 | 58,024.24 |
| 19 | Supply of GI MOUNTING STRUCTURES including Bolts & Nuts as per KPTCL approved drawing e) 66KVSurge Arrestors of 60KV (0.147 MT per Structure) | Numbers | 3.00 | 24,620.59 | 73,861.77 |
| 20 | Supply of GI MOUNTING STRUCTURES including Bolts & Nuts as per KPTCL approved drawing f)66KV Pedestal Insulator for rigid bus (0.143MT per Structure) | Numbers | 24.00 | 23,996.65 | 5,75,919.6 |
| 21 | Supply of Rigid Bus with TAPs & Clamps as per KPTCL approved drawing a) (i) Aluminum Tube conforming to 6340WP of IS-5082/1969 (BS 1600 -Sch.40) of following sizes. a) 63mm Size - 66kV | Metre | 102.00 | 1,713.36 | 1,74,762.72 |
| 22 | Supply of Rigid Bus with TAPs & Clamps as per KPTCL approved drawing b)50mm Size for connecting isolator to vertical tap- 66kV side | Metre | 30.00 | 1,449.04 | 43,471.2 |
| 23 | Supply of Rigid Bus with TAPs & Clamps as per KPTCL approved drawing (ii)Staight taps made of 50mm Aluminium pipe (BS 1600) of 1250mm vertical height for vertical portion and cross bus on 66kV side with round off end. | Numbers | 6.00 | 2,761.2 | 16,567.2 |
| 24 | Supply of Rigid Bus with TAPs & Clamps as per KPTCL approved drawing c)A. Post insulator Clamp suitable for 63mm Aluminum pipe and post insulators solid core type 66kV side - Rigid Type | Numbers | 6.00 | 2,068.54 | 12,411.24 |
| 25 | Supply of Rigid Bus with TAPs & Clamps as per KPTCL approved drawing c)A. Post insulator Clamp suitable for 63mm Aluminum pipe and post insulators solid core type 66kV side - Sliding Type | Numbers | 6.00 | 1,747.58 | 10,485.48 |
| 26 | Supply of Drake ACSR (including 66kV side) for Bus bar formation as per KPTCL approved drawing | Metre | 250.00 | 456.66 | 1,14,165 |
| 27 | Supply of Earth wire 7/3.15 mm steel with clamps/lugs for Bus bar formation as per KPTCL approved drawing | Metre | 100.00 | 103.84 | 10,384 |
| 28 | Supply of i) Post Insulators- Cylindrical solid core as per IS5350, Part II & III as per KPTCL approved drawing a) 66KV class1 Unit/stack - post insulator of rigid bus | Each | 12.00 | 6,412.12 | 76,945.44 |
| 29 | Supply of Single Tension string using 6 units each 11kV, 120kN Disc Insulator .(66 kV side) as per KPTCL approved drawing | Each | 6.00 | 5,678.16 | 34,068.96 |
| 30 | Supply of Single Suspension string using 6 units each 11kV, 90kN Disc Insulator .(66 kV side) as per KPTCL approved drawing | Each | 3.00 | 2,099.22 | 6,297.66 |
| 31 | Supply of Bolted type tension clamp to suit Drake ACSR- 66kv side as per KPTCL approved drawing | Numbers | 6.00 | 2,957.08 | 17,742.48 |
| 32 | Supply of Bolted type Suspension clamp to suit Drake ACSR- 66kv side as per KPTCL approved drawing | Numbers | 3.00 | 1,797.14 | 5,391.42 |
| 33 | Supply of C-Type wedge connector (T- shape) suitable for Drake-Drake ACSR - 66kv side as per KPTCL approved drawing | Numbers | 8.00 | 2,719.9 | 21,759.2 |
| 34 | Supply of C-Type wedge connector suitable for coyote-Drake ACSR - 66kv line as per KPTCL approved drawing | Numbers | 3.00 | 2,579.48 | 7,738.44 |
| 35 | Supply of 1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per technical specifications/as per KPTCL approved drawing. a)19 Core 2.5 Sq.mm. | Metre | 1000.00 | 619.5 | 6,19,500 |
| 36 | Supply of 1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per technical specifications/as per KPTCL approved drawing b) 4 Core 6.0 Sq.mm | Metre | 1200.00 | 291.46 | 3,49,752 |
| 37 | Supply of 1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per technical specifications/as per KPTCL approved drawing c)4 Core 2.5 Sq.mm. | Metre | 1200.00 | 167.56 | 2,01,072 |
| 38 | Supply of 1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per technical specifications/as per KPTCL approved drawing d)2 Core 2.5 Sq.mm. | Metre | 500.00 | 110.92 | 55,460 |
| 39 | Supply of 1.1 KV Class PVC insulated copper control cable with Lugs/Ferrules/Glands as per technical specifications/as per KPTCL approved drawing e)4 Core 4 Sq.mm. | Metre | 500.00 | 208.86 | 1,04,430 |
| 40 | Supply of Multi Functional Transducer(MFT) 0.2S class including Labor as per KPTCL approved drawing | Numbers | 1.00 | 5,752.5 | 5,752.5 |
| 41 | Supply of Opto Coupler(220 or 110kV DC) including labor as per KPTCL approved drawing | Numbers | 1.00 | 1,548.16 | 1,548.16 |
| 42 | Supply of Current Cable- Copper core with 4 sqmm cross sectional multistrand 4 core for CT Termination (4x4sqmmx2runs) as per KPTCL approved drawing | Metre | 20.00 | 208.86 | 4,177.2 |
| 43 | Supply of Voltage Cable- Copper core with 2.5 sqmm cross sectional multistrand 4 core for PT Termination as per KPTCL approved drawing | Metre | 20.00 | 167.56 | 3,351.2 |
| 44 | Supply of Signal/Communication Cable- Armoured copper core with 0.5sqmm cross sectional multistrand 10 core as per KPTCL approved drawing | Metre | 20.00 | 168.74 | 3,374.8 |
| 45 | Supply of Control Cable- Copper Core with 1.5sqmm cross section multistrand 10 core as per KPTCL approved drawing | Metre | 20.00 | 182.9 | 3,658 |
| 46 | Supply of DCU as per KPTCL approved drawing | Numbers | 1.00 | 44,261.8 | 44,261.8 |
| 47 | Supply of LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter, 2 I/C ACB, 800A + 2 O/G SFU, 200A + 8 O/G SFU,100A + 14 O/G SFU, 63A + 12 O/G, 32A + 1B/C SFU, 800A + 1DG change over switch 300A etc., complete as per technical specification/as per KPTCL approved drawing. | Numbers | 1.00 | 7,28,178 | 7,28,178 |
| 48 | Supplying and erection of street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N)- 8.5 mtr height as per KPTCL approved drawing | Numbers | 2.00 | 32,030.06 | 64,060.12 |
| 49 | Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Metering suitable baseplate and having a provision for Fuse/ MCBcut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility,Timer,Contactor,2 Way head frame with diecast LM-6 pulleys ,stainless steel axle,Phosphorus Bronze bearing bush press- fitted with separate guides for 2 runs of 5 mm dia,stainless steel wire rope of AISI304 grade7/19-core, Suitable reversible geared motor operating on 230/415V,50Hz,etc., as per techical specification/as per KPTCL approved drawing | Each | 2.00 | 77,337.2 | 1,54,674.4 |
| 50 | Supply of PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification/as per KPTCL approved drawing. 2C x 6 sqmm | Metre | 800.00 | 181.72 | 1,45,376 |
| 51 | Supply of LED Street light luminaire as per KPTCL approved drawing with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material LED streetlight 200W Note: Lightning / Lighting Mast (LM) type are proposed for lightning protection and for illumination of the station Yard. The quantity of lightning / lighting mast indicated are located such that the entire station yard with equipments is protected against lightning. However any additional lighting masts may be provided for sufficient illumination and lightning protection (DSLP)of yard, if necessary. The design of lighting outdoor & indoor is also in the scope of the bidder as specified elsewhere in the technical specification. The scope also includes supply & erection of lighting fixtures, lighting mast panels with timer, contactor, control cable, Motorized hoist etc. | Numbers | 10.00 | 22,530.92 | 2,25,309.2 |
| 52 | Supply of Rubber mats 2000 mm x 1000 mm x 12 mm size suitable for 1.1 kV class as per KPTCL approved drawing. | Numbers | 2.00 | 2,242 | 4,484 |
| 53 | Supply of Equipments name plates and earthing name plates including fixing at outdoor yard as per KPTCL approved drawing | Numbers | 20.00 | 490.88 | 9,817.6 |
| 54 | Supply of Mandatory Spares(like closing coil, tripping coil, GOS male -female contacts, Gas filling adapter, Gas leakage detector etc as per KPTCL approved drawing | Lumpsum | 1.00 | 2,00,000 | 2,00,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11.pdf
ATTACHMENT
1.Preamble1.docx1.pdf
ATTACHMENT
2.SCCElectrical11.docx1.pdf
ATTACHMENT
3.TechSpec12.docx.pdf
ATTACHMENT
4.Payments111.docx.pdf
ATTACHMENT
5.SCC202421.docx.pdf
ATTACHMENT
ExplanatoryNote.docx.pdf
ATTACHMENT
GCC_April-20223.pdf
ATTACHMENT
6.ACS1to10.pdf
ATTACHMENT
8.Proforma.pdf
ATTACHMENT
66kV630sqmmcablespec.pdf
ATTACHMENT
CivilandTBTechspecs.pdf
ATTACHMENT
detailsurveyapproval30mva.pdf
ATTACHMENT
KPTCLestimate.pdf
ATTACHMENT
civildrawings_1.pdf
ATTACHMENT
ExplanatoryNote19.08.2025.docx.pdf
ATTACHMENT
LineSpecKPTCL.pdf
ATTACHMENT
GISbasedassetmapping-23.2.24.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .