PROVN OF ELECTRIC CHIMNEY FOR OFFICERS MD ACCN IN THE AOR OF AGE E/M UNDER GE (A) SURATGARH AT SURATGARH MIL STN

Supply, installation, testing and commissioning of auto-clean Filterless BLDC Electric Chimney, toughened glass front panel with Heat Sensor, LED Lights (02 Nos.), Oil Collector Tray, Touch Control and Motion Sensor (operated with a wave of hand), size 60 cm, suction capacity 1400 m³/hr to effectively exhaust smoke and odor from kitchen. Voltage: 220–240V AC, 50Hz; BLDC Motor Power:180W; Heating Element Wattage: 50W; Speed Settings: 3-Speed. including flexible aluminium ducting pipe up to 8 feet, and all necessary hardware, accessories electrical connections bends,clamps,collars, fastenersandaccessories, including making opening of required size through RCC/brick masonry for passing exhaust duct, necessary cutting/chasing,PCC/plaster work and making good disturbed surfaces with putty and paint to match existing finish; including M&L for plywood and mica/laminate work wherever required for making good existing kitchen cabinet/woodwork disturbed during installation, connecting,testing and commissioning complete all as specified and directed. Make:Glen/Hindware/Faber/Crompton. Note:Quoted rate shall be deemed to include all necessary cutting/opening in RCC/brickwork, PCC, plastering, making good disturbed surfaces, plywood/micawork and all incidental works necessary for installationofchimney and exhaust duct, and no extra payment shall be admissible on this account.complete, all as specified and as directed by the Engineer-in-Charge

M&L for point wiring complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated multistranded unsheathed copper conductor cable drawn in and including concealed PVC rigid conduit medium grade 20mm dia, pipe hooks, elbows, junction covers and junction boxes including cutting chases in walls for conduits and for sunken pressed steel terminal boxes and making good the disturbed surfaces of wall with all jointing accessories including provision of pressed steel sunken terminal boxes made of 1.2mm thick pressed steel sheet, 60mm deep of suitable length and painted with red oxide primer for mounting modular switches, sockets, fan regulator including suitable size modular plates fixed flush with wall including 2.5 Sqmm PVC insulated multistranded unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point, fan point, bell point controlled by one switch for One 3 pin 5Amp Socket outlet on independent board complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall be deemed to included with cover plates with frame of any colour and metal flush boxes of suitable size as directed by Engr-in-Charge.

S&F Modular switch piano 6 Amps single pole, one way, 01 Module complete all as specified and directed by Engineer-in-charge.

S&F Modular socket 2/3 pin, 6 Amps, 230 volts, combined 2 Module complete all as specified and directed by Engineer-in-charge.

M&L for submain wiring complete with two single core 6 sq mm PVC insulated FRLSH multi stranded copper conductor cable drawing into and including rigid non metallic PVCconduit of size not less than 25 mm dia, ISI marked with all conduit fittings & fixing accessories and one single core 6 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed. Note- (a) Two runs of 6 Sqmm single core cable and one run of 6 Sqmm as specified earth continuity conductor and PVC conduit with fitting acessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor