Renovation of Canteen Area in Udyog Bhawan Sector 17 Chandigarh

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Dismantling brick or flagged stone flooring including concrete base.

Dismantling concrete

Cement concrete plain 1:4:8 or 1:5:10

Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including cost of neat coat of cement disposal of rubbish to dumping ground within lead of 50 m lead

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

12.5 mm thick cement plaster 1:4

Providing and fixing 12 mm thick toughened glass of approved brand and manufacture in MS railing / aluminum sections/ windows with necessary Adhesives/screws, hinges, u channel, clips, etc. as per approved drawings complete in all respect to the entire satisfaction of Engineer in charge.

Providing and fixing aluminium Wire Mesh including cost of necessary fittings i.e. screws, u Type Beading etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semiatt/ Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing and fixing of flooring/ glazed Brick wall tiles having size as per approved drawings including the cost of adhesive, cement, labour complete in all respect to entire satisfaction of enginner in charge.

Providing and laying Mat finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Mat finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete

Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position Code: IS 2202-1 (1999):

Commercial with elm or gurjan facing on both\ Sides with laminated core and lipped edges:- (35mm)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Providing edge moulding to 18 mm thick marble/ Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete

I.S.I Designation No. III (size of door 851mm to 1000mm)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and supplying aluminum extruded tubular and other aluminum sections as per the architectural drawings and approved shopdraw ings , the aluminum quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminum frame work. Nothingextra shall be paid on this account). The weight of aluminum extruded section shall be taken for purpose of payment.Providing and supplying aluminum extruded tubular and other aluminum sections as per the architectural drawings and approved shopdraw ings , the aluminum quality as per grade 6063 T5 or T6 as per BS 1474,including supe durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminum frame work. Nothing extra shall be paid on this account). The weight of aluminum extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including

(b) Fabricating and supplying serrated M.S. hot dip galvanised / aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminum grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the aproved shop drawings and as directed by the engineering-Charge

Note:- 1. The cost of providing extruded aluminum frames, shadow boxes, extruded aluminum section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & echnologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/ IEC 17025.

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for arange upto 2000 ml 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330- 10 testing method for a range upto50 mm 5. Seismic Movement Test (upto 30 mm) as per AMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

Providing & fixing of knobset made of stainless steel body, having provision of latch and bolt, 3 nos key set, inside push lock model ETL-101A, Finish SS/PB/AB make-ENOX or any equivalent (Lock should be releasable from out side in case of emergency) as per requirement for unisex toilet for PwD complete as per specifications, Harmonised guidelines for PwD and as desired by engineer-incharge

Providing and fixing 12 mm thick frameless toughened glass door shutter of including providing and fixing top & bottom pivot & making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Providing and fixing of ASSA-YALE/Stanley-Wall/Dorma crown Mortise Deadlockset consisting of Mortice deadlock 18 P4 with 50 mm backset with 50 mm centres wiht double throw deadbolt and prepared for euro profice incluidng strike plate in satin stainless fteel finish including the fixing accessories comple in all respect

Providing and fixing of ASSA-YALE/Stanley-Wall/Dorma crownYEH-01 (450X25mm H type handles with extended spingle back to back with 300 mmm CTC adjustable fiixing for doors including the fixing accessories complete to entire satisfactoin of Engineer in charge

Providing and fixing of ASSA-YALE/Stanley-Wall/Dorma crown Floor spring Model No. FS934P with standard spindle conforming to DIN EN 1154 double cylinder non handed unit suitable for door upto 150kg leaf weigh complete including the fixing accessories complete to entire satisfactoin of Engineer in charge

Providing and fixing BWP plywood 19 mm thick heat Retardant/Resistance , waterproof of approved make over existing wooden/aluminum/ GI frame work including necessary screws, adhesive etc complete to the entire satisfaction of Engineer-in-Charge.

Cement pointing 1:2 deep variety.

Providing & Fixing decorative high pressure laminated sheet 1mm (2 Star) thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality, over partal wood frame of section 2"x1.5" covered with 6 mm thick flexi plywood of approved make to the entire satisfaction of engineer-in-charge.

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with Duco paint with compressor in all shades on wood work, metallic or plastered, concrete surface to give an even shade as per approved drawings complete in all respect to the entire satisfaction of Engineer.

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.

Eurpoean/Indian/Orissa W.C.,

PVC / China Ware Cistern / Wash Hand Basin

CP Bib Cock /AngleCock /StopCock /Shower /Bottle Trap

wall mixer/sink mixer/basin mixer/concealed stop cock

Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of EDC manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.

Single Socket Type B

110mm o/d SWR UPVC pipe line laid complete

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B- Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.

Providing and fixing in position Chinaware Indian Orisa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.

PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.

Providing and fixing PVC accessory fittings in Chinaware flushing cistern 10 Litres capacity complete.

Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.

Providing and fixing Stainless steel health faucet complete in all respect

Providing and fixing in position vitreous Chinaware white Senso urinal size 37 x 39 x 61 cm of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm complete in all respect.

Providing and fixing partition for urinals of Granite stone size 375mm x 750mm of minimun thickness 38mm to 40mm (Two stones of minimum thickness 19mm to 20mm each) thick duly jointed and strengthend with araldite for different type of urinals complete to the sastisfaction of Engineer-in-charge.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S studs on top complete in all respect (as required by the Engineer-in- Charge)

Size 1500mmx600mm or any other size

Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing, Stringing out, cutting, Jointing and testing of C.I. Double Flanged pipes with casted flanged as per IS:7181, Class-B (ISI marked with the prior approval of Engineer-in- Charge) and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion fitted complete including all cartage

80mm i/d pipe lines laid complete

Providing and fixing in position C.P. brass, bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.

C.P. brass toilet paper holder

Providing & Fixing in postion stop cock / Angle valve of approved make complete in all respect.

C.P.brass 15mm Concealed stop cock with flange.

Providing and fixing in position C P Brass Auto close bib Cock of approved make (to the approval of Engineer in charge)

Providing and fixing PVC waste pipe collapsible 32mm complete in all respect.

Providing and fixing in position SS Grating with frame of approved make (to the approval of Engineer in charge) complete in all respect.

Providing and fixing of Atomatic Hand Dryer (304 Dolphy stainless steel high speed hand dryer) complete in all reapect to the entire saticfaction of Engineer in Charge.

Providing and fixing in position vitreous Chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.

Size 630mm x 500mm (Above Counter)

Providing and fixing CP Brass Waste 32mm dia for wash basin and sink, of approved quality and colour, complete in all respect to the entire satisfaction of Engineer in charge.

Providing and fixing in position liquid soap container of approved make (to the approval of Engineer in charge) complete in all respect.

C P Brass liquid soap container.

Providing and fixing in position CP Brass Auto close Pillar Cock of approved make (to the approval of Engineer in charge.

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect For General toilets.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.

C.P. Brass extension piece, 25mm long to 50mm long

Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.

35mm dia 600mm (24”) long

Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Providing and fixing face Tiles 230 x 38 x 18 mm machine made vibro hydraulic compacted Burnt Clay brick Tile silicon coated on one side(Colour Terracotta series) on wall with under layer of 12 mm thick cement plaster 1:3 and jointed with neat cement matched with pigment complete as per drawings, specifications and to the entire satisfaction of engineer-in-charge.

Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge.

Providing and fixing Centrifugally cast iron Floor traps conforming to I.S.I. Specification (IS:3989) of approved make (to the approval of Engineer-in ch arge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under a nd around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a minimum seal 50mm.

100mm x 75mm i/d 300 mm long

Providing and fixing in position Centrifugally cast iron special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.

100mm i/d Bend plain

75mm i/d Plain Tee

75mm i/d Collars

100mm i/d Collars

100mm i/d Off sets 75mm projection

Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.

Through wall 22.86 cm thick

Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc., with PVC Plug/neoprene gasket etc., complete as per the architectural drawings and the directions of Engineer in charge (cost of aluminium snap beading shall be paid in basic item)

Float glass panes of 5mm thickness.

Steel work in built up tubular pipes (roung, square or rectangular hollow tubes etc., ISI marked) for flat shed (i.e. where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete.

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer in charge) 1mm thick grade 304 (18/8) with waste coupling complete in all respect.

Rectangular sink with Deluxe Border Single Bowl Overall Size 555mm x 475mm x 200mm

Carriage of dismantled building rubbish material/waste material outside the complex inclusive of loading and unloading and disposal to the unobjectionable place by mini truck.

Labour for Carriage of malba/material from General toilets from each floor to basement area to the entire satisfactio of Engineer in charge

Providing and installation of SS wall mount automatic air freshener spay dispenser machine powered by battery, complete in all respect to the entire satisfaction of Engineer-in-Charge.

Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a seal complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Pollycarbonate sheet Multiwalled 12mm thick

Credit of the old dismantled sanitary fixtures and other fittings from toilets and kitchen

Eurpoean/Indian/Orissa W.C.,

PVC / China Ware Cistern / Wash Hand Basin

CP Bib Cock /AngleCock /StopCock /Shower /Bottle Trap

wall mixer/sink mixer/basin mixer/concealed stop cock

Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories.

G.I. pipe lines, specials, valves and fittings

15mm internal diametre pipe line

32mm internal diametre pipe line.

100mm i/d H.C.I. pipe

75mm i/d H.C.I. pipe

Wooden Chowkhat with Flush door shutter

Door closer

Liquid soap dispenser

Aluminum

Providing and fixing of Hording of "UDYOG BHAWAN CANTEEN" of Size 12'-0" X 4'-0" on ACP Sheet 3mm, Top Fixing of 3D Acrylic Letter with Backlight LED, including transportation complete in all respect.

Providing and fixing of wooden false ceiling at all heights comprising of 4mm teak veneer with 12mm thick plywood rafters of size 2"X4"@10" fixed with 19mm thick plywood which is to be hanged to the roof with G.I. Cradling by means of G.I. hanger as per approved drawings complete in all respect to the entire satisfaction of Engineer in charge.

Refilling of reclaimed material from existing Toilets including spreading, grading compacting to meet requirement & specifications to the entire satisfaction of Engineer in charge

Cutting Chase in brick walls in cement or in floor for embedding G.I. or C.I. pipes line and making good the same to its original condition.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded)

Supply of first class brick tiles for replacement of the broken and unusable tiles at the time of regarding of the tile terracing including the cost of loading unloading and carriage to site.

Providing and fixing ACP sheet of thickness 6mm high class ISI marked including the cost of adhesive, screws, clips, channels etc necessary for fixing of ACP sheet over aluminium.MS structure complete in all respect.

Providing and fixing 4mm HDHMR board of approved make over existing wooden or aluminium or GI frame work including necessary screws, adhesive etc complete to the entire satisfaction of Engineer in charge.

Painting two or more coats excluding priming coat with Duco paint with compressor in all shades on wood work, metallic or plastered, concrete surface to give an even shade as per approved drawings complete in all respect to the entire satisfaction of Engineer in charge.

Providing and Designing of Moulding Photo Frame made up with Suitable Fibre/Wooden for display of Phulkari Handicrafts pasted on the HDHMR Board/Suitable Material having all round border made with suitable fabric/cloth and Printing/pasting coloured tagline having Phulkari & Punjab Govt logo alongwith provision of hooks for hanging on wall for Display in Udyog Bhawan including Cost of Labour & Carriage etc., complete ( in all respects). (Phulkari Frame 8'-5" x 4'5")

REPLACEMENT OF WIRES, SHEETS, SWITCHES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH FLUSH PIANO TYPE ACCESSORIES) Derived From CSR 34.03:

Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface):-

Wiring fan point (With fan box)

Wiring light point .

Wiring 6Amp.wall socket point

Wiring 6Amp.plug control comprising wall socket point

Wiring 16/20Amp. Power plug control point

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder oated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (With fan box)

Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

PVC, HDPE PIPES & PVC FLEXIBLE PIPES

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)

PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE:

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 6.0sq.mm (56/0.3mm), 3Core

MINIATURE CIRCUIT BREAKERS:

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32 amp. (10kA, Curve-C)

MCB Double Pole 50, 63amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve- C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 12 way each

TP&N Horizontal Double Door Distribution Board 4 way each

Supply and Erection of 60-72 W LED flood lighting luminaries with PDC housing and toughned glass suitable for ceiling surface/suspended ,mount complete . including erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site.

Supply and Erection of 20W batten lighting surface mounted complete including erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site.

Supply and Erection of 16W cylinderical,COB type LED lighting suspended mounting aluminium extruded housing complete including erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site.

Supply and Erection of recess mounted 20W Industrial batten -IP66 with inbuilt heat sink polycarbonate housing equipped with anti glare diffuser and energy efficient electronic driver LED luminaries including erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site.

S/E id ceiling fans 1200mm sweep(48") having two ball bearing but without regulator including flexible wire & petty material etc. for connections complete with erection ,connection and testing etc. complete in all respect as approved and desired by the Engineer -in -charge at site .

S/E of heavy duty exhaust fans of size 300mm sweep(12") ,900 RPM complet with louvers including flexible wire & petty material etc. for connections complete with erection ,connection and testing etc. complete in all respect as approved and desired by the Engineer -in -charge

Supply and erection of 2Tr capacity split type AC 3 star rating complete all respects to entire satisfaction of Engineer in charge.

Supply and erection of 5Tr capacity ductale split type AC 3 star rating complete all respects to entire satisfaction of Engineer in charge.

Supply and erection of MS angle iron stand complete as required

Supply,installation, testing and commissioning of pvc class 5 ( 10Kg/Cm2 ) piping complete as per specification.

25mm dia

Supply and erection of refrigerant copper piping 5 tr capacity AC complere with tubular insulation as required

Supply and erection of refrigerant copper piping 2 tr capacity AC complere with tubular insulation as required

Horticulture Work:

Supply Specimen pot plant in 45cm cement pots for outdoor display at site work.

Supply pot plants in 30cm pots with plastic plate for indoor display site of work (b) in earthen Pot.

Please Enable Macros to View BoQ information