Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹25.3 LAWARDED | AWARDED |
Tender Value
₹25.3 L
EMD Value
₹45,000
Closing Date
26 Sept 2025, 10:00 pmClosed
Directorate of Municipal Administration
Revival of large and small water supply projects of B. Mooda village, B. Kasba village and Panemangalore villages within Bantwal Municipality limits
DMA/2025-26/OW/WORK_INDENT47529
DMA/2025-26/OW/WORK_INDENT47529
Open
Other Works
Electronic Documents, First(One Cover)
DMA Town Municipal Council Bantwala
₹640
₹45,000
15 Sept 2025
15 Sept 2025
25 Sept 2025
Revival of large and small water supply projects of B. Mooda village, B. Kasba village and Panemangalore villages within Bantwal Municipality limits
150mm Sluice Gate valve Replacement
3 core flat PVC sheathed submersible pump cable
Discharge outlet (DO) bearing & D.O Steel Bush
Impeller (Shell moulded with Aluminium Bronze)
Pump Coupling (Stainless Steel)
15HP Starter Panel Board set
2 inch Non-return valve (NRV) assembly complete with rubber 'O'ring
20 H.P. Fully automatic stater delta starter
25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) UG Cable
Bearing (Gun metal) centrifugally cost Aluminium Bronze, bearing bush
Borwell Clamo and Cap
Busmain 200 Amps Fuse
Contactors Set 63 Amps
Digging of trench of 0.6 m deep x 0.50mtr wide refilling the trench to the required ground level and consolidating etc., complete. In Asphalt cutting
Digital Volt and Amps Meter
Discharge outlet (DO) bearing & D.O Steel Bush
Earth work excavation for cable trench In Hard Soil
Errection Electrification and and commisioning works of pumpsets
Fuse Cutout set 100 Amps
Fuse Cutout set 200 Amps
Galvanised Mild Steel Tube Supply and delivery of Galvanised mild steel tubes Heavy class (C-Class) as per IS 1239 (Part-1) 1990 with latest amendments with ISI mark A) 50mm
Greasing to Motors and Resetting
Heavy duty unplasticized PVC Column pipes
Impeller (Shell moulded with Aluminium Bronze)
Intermediate piece (IP) with IP Leaded Bronze Bush
L&T 3R 24H 4-110 Board assemble and wiring installation with busbar
Labour Charges (over Hauling job)
Lifting of submersible Pumpset
Lifting of submersible Pumpset
Motor Base with pin
Motor Rubber Bush
Motor side housing bush
Motor side Housing Bush
Motor smotor side housing bush
Non return Valve
Oil seal steel bush
Outside Labour for Tank cleaning
Providing and fixing 50mm dia non return valve
Providing and fixing galvanised mild steel tube GI collars of 50mm dia
Providing galvanised mild steel tube heavy class conforming to IS 239 Part 1 -1979 with latest amendments with ISI mark. One and fitted with protective cover of pipe size 50mm dia
Providing Submercible pumpset suitable for borewell of 150mm dia and having the declared duty conditioned as detailed below and satisfying performance characteristics for pump and motor as declared by...
Providing Submercible pumpset suitable for borewell of 150mm dia and having the declared duty conditioned as detailed below and satisfying performance characteristics for pump and motor as declared by...
Pum side Housing bush
Pump Coupling (Stainless Steel)
Pump Key (Stainless Steel)
Pump shaft made out of stainless steel contreless ground with, key way
Re-erection charges of Sumersible Pumpset machineries including overhauling machineries
Relay Unit (LTLK) MK 2- type
Remove Tank water (Out side Pump for rent)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(10 HP)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(12.5HP)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(12.5HP)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(15HP)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(20HP)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(5 HP Openwell)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(6 HP openwell)
Rewinding of submersible Pumpset motor above 10 HP upto 20 HP for every 0.5 HP(7.5 HP)
Rewinding of submersible Pumpsetr motor above 5 HP to10 HP for every 0.5 HP (6 HP)
Single Phase Preventor
Starter Coil (LTLK) MK-2 type
Supplying & fixing 100A 4 pole Moulded Case Cercuit Breaker(MCCB)over the existing wood/panel board using necessary screws,bolts,nuts and wiring complete . Protection of Overload and short circuit wi...
Supplying and fixing of MCB 32 to 63 Amps 3 phase
Tank Cleaning and rent Pump for Tank empty
Thrust bearing block assembly complete with segment bearing pad.
Transportation of Submersible Pumpset Machineries
Voltage transformer
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .