Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 and reasonable for acceptance | |
| 2 | L2₹6.0 L+₹25,335 (4.37%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹6.2 L+₹45,280 (7.81%)Rejected-Finance SHIV NIWAS DHANDA P O TOTU DISTT SHIMLA HP 171011 | SHIMLA | SHIMLA | HIMACHAL PRADESH | 171011 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹6.5 L+₹69,935 (12.1%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹6.7 L+₹85,785 (14.8%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | Modern Enterprises L6 | B S ENTERPRISES L5 | SANMATI UDYOG L2 | BALWINDER SINGH AND SONS L4 | M/s Dinesh Kumar L3 | M/s Bhisham Raj and Sons L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | REPAIR & PAINTING TO TABLE 900X600X760 MM STEEL WITH AND WITHOUT DRAWER Removing of Unserviceable top of the table and S&F new top of the table made out of 18mm thick pre-laminated Partical Board natural teak shade including 3mm thick teak wood edging complete all as specified & directed. FD-1007 Make: Century/Greenply/Action Tesa | 70 | Each | 390 ₹27,300 | 550 ₹38,500 | 300 ₹21,000 | 350 ₹24,500 | 340 ₹23,800 | 250 ₹17,500 Lowest |
| 2.00 | Removing of old unserviceable legs /stiffener and S&F new legs / stiffener out of 25mm sq tube 1.6 mm thick and fixing in position complete all as specified and directed. FD-284/55/223/42/221/1007 /1008 | 30 | Each | 70 ₹2,100 | 100 ₹3,000 | 80 ₹2,400 | 50 ₹1,500 Lowest | 85 ₹2,550 | 65 ₹1,950 |
| 3.00 | M&L for painting of table with drawer with one coat of synthetic enamel paint over a coat of complete all as specified and directed.FD-1007 | 60 | Each | 80 ₹4,800 | 125 ₹7,500 | 60 ₹3,600 Lowest | 60 ₹3,600 Lowest | 70 ₹4,200 | 75 ₹4,500 |
| 4.00 | Repair to broken drawer complete all as shown on Drg and specified and directed. FD-1007 | 30 | Each | 50 ₹1,500 | 90 ₹2,700 | 40 ₹1,200 Lowest | 80 ₹2,400 | 60 ₹1,800 | 120 ₹3,600 |
| 5.00 | S&F hard rubber shoe of best approved quality (as per existing size) specified and directed FD-1007 | 240 | Each | 5 ₹1,200 Lowest | 10 ₹2,400 | 6 ₹1,440 | 20 ₹4,800 | 13 ₹3,120 | 5 ₹1,200 Lowest |
| 6.00 | REPAIR & PAINTING TO ALMIRAH STEEL LARGE Removing of old unserviceable shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position complete all as specified and directed. FD-1031 | 50 | Each | 200 ₹10,000 | 150 ₹7,500 | 150 ₹7,500 | 250 ₹12,500 | 210 ₹10,500 | 125 ₹6,250 Lowest |
| 7.00 | Removing of old unserviceable / broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and specified and directed. FD-1031 | 40 | Each | 240 ₹9,600 | 200 ₹8,000 | 400 ₹16,000 | 200 ₹8,000 | 180 ₹7,200 Lowest | 185 ₹7,400 |
| 8.00 | Removing of old unserviceable locks and S&F new locks to steel almirah large. FD-1031 Make:Godrej/Harrison | 90 | Each | 150 ₹13,500 | 100 ₹9,000 | 100 ₹9,000 | 90 ₹8,100 | 150 ₹13,500 | 85 ₹7,650 Lowest |
| 9.00 | All as per Srl item No 06 above but CP handle (as per existing size) FD-1031 Make:Godrej/Harrison | 90 | Each | 50 ₹4,500 | 50 ₹4,500 | 100 ₹9,000 | 50 ₹4,500 | 50 ₹4,500 | 35 ₹3,150 Lowest |
| 10.00 | Removing of old unserviceable paints and painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all as specified and directed. FD-1031 | 90 | Each | 300 ₹27,000 | 300 ₹27,000 | 350 ₹31,500 | 450 ₹40,500 | 265 ₹23,850 Lowest | 300 ₹27,000 |
Tender Value
₹10.0 L
EMD Value
₹19,925
Closing Date
2 Jul 2025, 6:00 pmClosed
AGE (I) SURANUSSI
AGE (I) SURANUSSI C/O 56 APO
REPAIR TO ALL TYPE OF STEEL FURNITURE AND PAINTING AT MIL STN SURANUSSI UNDER AGE (I) SURANUSSI.
2025_MES_712728_1
AGE (I)/S-08/2025-26
Open Tender
Civil Works
Item Rate
180 days
AGE (I) SURANUSSI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) SURANUSSI
₹19,925
Yes
2 Sept 2025
5 Jun 2025
5 Jul 2025
5 Jun 2025
2 Jul 2025
19 Jun 2025
Amount
REPAIR & PAINTING TO TABLE 900X600X760 MM STEEL WITH AND WITHOUT DRAWER Removing of Unserviceable top of the table and S&F new top of the table made out of 18mm thick pre-laminated Partical Board natural teak shade including 3mm thick teak wood edging complete all as specified & directed. FD-1007 Make: Century/Greenply/Action Tesa
Removing of old unserviceable legs /stiffener and S&F new legs / stiffener out of 25mm sq tube 1.6 mm thick and fixing in position complete all as specified and directed. FD-284/55/223/42/221/1007 /1008
M&L for painting of table with drawer with one coat of synthetic enamel paint over a coat of complete all as specified and directed.FD-1007
Repair to broken drawer complete all as shown on Drg and specified and directed. FD-1007
S&F hard rubber shoe of best approved quality (as per existing size) specified and directed FD-1007
REPAIR & PAINTING TO ALMIRAH STEEL LARGE Removing of old unserviceable shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position complete all as specified and directed. FD-1031
Removing of old unserviceable / broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and specified and directed. FD-1031
Removing of old unserviceable locks and S&F new locks to steel almirah large. FD-1031 Make:Godrej/Harrison
All as per Srl item No 06 above but CP handle (as per existing size) FD-1031 Make:Godrej/Harrison
Removing of old unserviceable paints and painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all as specified and directed. FD-1031
REPAIR & PAINTING TO ALMIRAH STEEL MEDIUM Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as specified and directed. FD-1032
Removing of old unserviceable / broken legs and S&F new legs out of 1.00 mm thick PBI Sheet complete all as shown on drg and specified and directed. FD-1032
Removing of old unserviceable locks and S&F new locks to steel Almirah medium. FD-1032 Make:Godrej/Harrison
All as per Srl item No 11 above but CP Handle Make:Godrej/Harrison
Removing of old paints and painting of steel Almirah medium with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and directed. FD-1032 & 109
CHARPOY GI PIPE WITH PLYTOP (Drg No FD-220) S&F in replacement, long rail, 1.88 m long made out of 32mm dia, GI pipe, medium grade, cut to required length, threading both ends and including taking out old unserviceable long rail from GI charpoy frame complete all as specified.
Fixing only, in replacement, short rail, 0.815 m long made out from old long rail 32mm dia, retrieved from Srl item No 78 here-in-before including cutting and threading both ends & fixing in position including taking out old unserviceable short rail from GI charpoy frame complete all as specified.Note:- Long rails retrieved from Srl Item No 81 shall be converted into two short rails and credit recovered for balance unservicable pipe.
S&F GI check nut duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable elbow from GI charpoy frame complete all as specified.
S&F GI elbow 3 way duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable elbow from GI charpoy frame complete all as specified.
S&F in replacement 12mm thick plywood, 7 ply, commercial BWR type, size 1980x900mm fixed with 10 nos bolts & nuts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm flat iron, 850mm long, welded to long rails, gap between rails and plywood top to be filled with 4mm thick 40mm wide , stiffeners/supports also to be fixed with plywood top with 2 nos bolts & nuts provided to each stiffeners/supports including painting to mild steel work with synthetic enamel paint black, tightening of check nuts, elbows, rails, legs etc complete all as specified.
BED HARD STEEL (Drg. No FD/E6/MAP/08(R) & Similar Drawings) Taking out existing broken plywood from the bed hard by loosening the nut bolts with washers and Supply and fixing new 12 mm thick BWR grade plywood fixed to bed hard frame with new GI Nut, bolts complete all as specified.
Taking out existing broken head board from bed hard steel and Supply and fixing new head board (shown all as per drg) made out of MS square pipe of size 38mm x 38mm square pipe (18 Gauge), size 18mmx18mm (18 Gauge), 25mm x 65mm (18 Gauge) and 25mm x 25mm (18 Gauge) incl 18 mm thick exterior grade pre laminated particle board in teak shade or any shade approved by GE with 4mm thick teak wood beading in matching shade with new screws and also including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black complete all as specified.
Taking out existing broken foot board from bed hard steel and Supply and fixing new head board (shown all as per drg) made out of MS square pipe of size 38mm x 38mm square pipe (18 Gauge), size 18mmx18mm (18 Gauge), 25mm x 65mm (18 Gauge) and 25mm x 25mm (18 Gauge) incl 18 mm thick exterior grade pre laminated particle board in teak shade or any shade approved by GE with 4mm thick teak wood beading in matching shade with new screws and also including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black complete all as specified.
Spray painting all steel surface with existing shade and colour or as approved by GE after application of sand paper and grinder to make the surface smooth and even over red-oxide primer complete all as specified and directed.
Material & Labour for rubber shoe of approved quality to bed hard steel including Opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge.
Supply and fixing of stiffeners made of Square pipe 25 mm x 25 mm (18 Gauge) size including taking out the old unsv parts including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black/olive green complete all as specified and directed by the Engr-in-Charge.
Material & Labour for replacement long rail made out of MS square pipe of 25mm x 65mm (18 Gauge) size all as per mentioned in drg including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
CHARPOY IP HARD TOP (Drg. No FD/MAP-II/01) Taking out existing broken plywood from the charpoy IP by loosening the nut bolts with washers and Supply and fixing new 12 mm thick BWR grade plywood fixed to Charpoi IP frame with new GI Nut, bolts complete all as specified.
Taking out existing broken legs from Charpoy IP steel and Supply and fixing new legs (shown all as per drg) made out of MS square pipe of size 32mm x 32mm square pipe (18 Gauge), with new screws and also including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black complete all as specified.
Supply and fixing of stiffeners made of Square pipe 25 mm x 25 mm (18 Gauge) size including taking out the old unsv parts including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black/olive green complete all as specified and directed by the Engr-in-Charge.
Material & Labour for replacement long rail made out of MS square pipe of 25mm x 65mm (18 Gauge) size all as per mentioned in drg including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material & Labour for replacement short rail made out of MS square pipe of 25mm x 65mm (18 Gauge) size all as per mentioned in drg including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Spray painting all steel surface with existing shade and colour or as approved by GE after application of sand paper and grinder to make the surface smooth and even over red-oxide primer complete all as specified and directed.
REPAIR & PAINTING TO LOCKER STEEL Removing of old unserviceable shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position complete all as specified and directed. FD-1029
Removing of old unserviceable / broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and specified and directed. FD-1029
Removing of old unserviceable locks and S&F new locks to steel almirah large. FD-1029 Make:Godrej/Harrison
All as per Srl item No 34 above but CP handle (as per existing size) FD-1029 Make:Godrej/Harrison
Removing of old unserviceable paints and painting of Locker steel with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all as specified and directed. FD-1029
SANMATI UDYOG (BID ID -3344691)
M/s Dinesh Kumar (BID ID -3344535)
BALWINDER SINGH AND SONS (BID ID -3344718)
B S ENTERPRISES (BID ID -3342243)
Modern Enterprises (BID ID -3336111)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .