CERTAIN B/R REPAIR TO MES OFFICE COMPLEX AND BSO YARD AT MIL STN SURANUSSI UNDER AGE (I) SURANUSSI.

Amount

Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed

Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed

Taking down shutters of any description exceeding 1sqm each and not exceeding 2.00 sqm each complete all as specified and as directed

Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed

M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified

Ditto all as per item No above but except brick work complete all as specified.

M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified.

M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed

Dismantling posts or struts embedded in brick work/concrete (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S&F Framed work as in doors or gates of angle or grills/guard bars other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed

S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed

M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed

Supply & Fixing for wire gauge shutter and skeleton shutter steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note :(i) Two shutters ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Wire gauge and glass shall be measured and paid for separately under relevant item of schedule.

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F in 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane

S&F 300mm size stainless steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified

S&F stainless steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified

S&F 125 mm size stainless steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.

S&F 300mm long mild steel ordinary rat rail rod pattern door spring including roller and roller plate complete all as specified and as directed by engineer-in-charge.

S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

M & L 25 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, including all fittings i.e Continuous (piano) hinges 30mm width magnet catchers drawer runner folding type cp steel Hasp & staple mortice lock with handle ,butt hinges peg set etc and all kitchen cabinet accessories and fixed with screws to timber frame work ( Note :- Cost of plain solid straight chowkhat & frame 2nd class hardwood shall be deemed to included in unit rate quoted).including magnetic catcher and stainless steel handle as required and all kitchen cabinet accessories and fixed with screws to timber frame work

S & F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and cup board with all locking arrangement similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S&F in repair Vitreous china ware water closet "Orissa Pattern " of size 580mm X 440mm size with integral foot rest with 'P' or 'S' trap ,integral foot rest including water connection to trap and flushing pipe ,flushing cistern etc including lime concrete in lime mortar 1:3 using broken bricks 40mm graded coarse aggregate complete all as specified. Make: Hindware / Cera / Parryware.

S&F in repairs vitreous china wash down water closet Padestal pattern( white ) includng plastic water closet seat white with jet .closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device P or S trap including plastic water closet seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified. Make: Hindware / Cera / Parryware.

S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge.

S& F in repair vitrious china wash hand basin flat back 550X400mm and padestal incl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap (swan neck) etc all as specified and directed by engineer-in-charge.

Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed

Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge.

Ditto all as per item No 57 above but 20mm bore.

S&F 15 mm dia GI water tubing ,medium grade with all fittings complete to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified and as directed by engineer-in-charge.

S&F 20 mm dia GI water tubing ,medium grade with all fittings complete to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified and as directed by engineer-in-charge.

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.

S&F in repair 15mm size stop valves Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedPTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.

S&F in repair 20 mm size stop valves Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedPTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.

M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified

M&L preparing old surfaces of walls and applying two coats of oil bound distemper over and including a coat of wall care putty to achieve smooth finish surface on wall complete all as specified

M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of primer complete all as specified incl preparation of surfaces.

M&L preparing new plastered surfaces on ceiling and applying two coat of oil bound distemper over a coat of alkali primer etc all as specified

M&L for complete removal of existing treatment and preparation of old plastered or unplastered surface of wall surfaces on ceiling and applying one coats of oil bound distemper etc all as specified

M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces complete all as specified

M&L for one coats synthetic enamel paint on old treated wooden surface over 10 cm width or girth all as specified

M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer etc all as specified

M&L for preparation of old painted steel surfaces of any description over 10cms width or girth and applying one coat of syntehtic enamel paint on steel surfaces comple all as specified

M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed or bedding layer in CM 1:4 all as specified and directed by Engineer-in Charge

M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.

M&L for glazed ceramic tiles coloured of size 450x300x7mm th on vertical surfaces such as in skirting, dado etc including 10 mm th backing coat in cm 1:4 complete all as specified and directed by Engineer-in Charge.

Form work to soffits of suspended slab such as roof slab/Kitchen slab n exc 200mm thick (horizontal/sloping/vertical) with fair finished surface complete all as specified

M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified

Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for as specified and directed by Engineer - in - Charge .

M&L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in slabs supported on walls, beams, columns deck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge .

Supply & fixed sliding/opening anodised aluminum door/window/partitions shutters including frame,and made out of hollow extruded alumimum sections as mentioned below. Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, hydraulic door spring. Shutter to be partly glazed with 5mm thick, plain or tinted glass and partly paneled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket, anodized aluminum beading, screws including bothside openable in door bottom hydraulic double action machine machine complete all as per specified and directed. Chowkat / frame 101.60 x 44.45 x 1.60 mm thick Shutter top and bottom rail : 114.30 x 44.45 x 1.55 mm thick, Shutter middle rail 83.50 x 44.45 x 1.55mm, Shutter verticle style : 85 x 44.45 x 1.55 mm thick.complete all as specified

S & F Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and as directed.

Dismantling wall and Ceiling boards any thickness, including cover fillets complete all as specified and as directed

M&L for 12mm th perforated particle board/tiles for insulation and accoustic purpose 60X60CM in size fixed in frame work /grid complete all as specified and as directed Make : - Armstrong ,Gypcore

M&L 605mmX605mmsize anodised Aluminium snap grid frame work for false ceiling with aluminium angle 25X25X1.5mm th and Tee 25X35mmX1.5mm th and using 2mm GI wire adjustable as suspender in required length complete all as specified and as directed . Make : - Armstrong ,Gypcore

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in roof covering completed specified and directed by engr-in-charge complete all as specified and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with J-type hook complete all as specified and as directed Make : JSW,TATA

S&F Pre- painted galvalume aluminum zinc coating GI based plain sheet ,sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with J-type hook complete all as specified and as directed Make : JSW,TATA

M/s Dinesh Kumar (BID ID -3345819)

SONA BUILDERS (BID ID -3343995)

JAI DURGA CONSTRUCTION COMPANY (BID ID -3344828)

AAY KAY Constructions (BID ID -3336614)