NIT NO.99/EE(R-V)/2019-20

Amount

AIR WALKER / Health Walker Providing and fixing Air Walker made from “C” class GI Pipe. The center pipe is of 80mm NB made from “C” Class MS pipe, 32mm NB:- Air Walker pedal frame duly bend, 25mm NB:- Air Walker handle frame duly bend and the bottom support of M.S. round plate of 250 mm dia & 10mm thickness is welded at bottom. MS plate of 245 x 113 x 2.8mm :- Footrest support plate. The leg movement frame is of 40mm NB made from “C” Class MS pipe. The handle frame is of 25mm NB made from “C” Class GI pipe. The foundation used for fixing is consists of three equal items i.e. 80mm NB made from “C” Class GI pipe, M.S. Round Plate of 250 mm dia & 10mm thickness & 25 mm X 25mm M.S. angle of 3 mm thickness. MS pipe 48 x 48 x 2.8mm:- Footrest frame support. MS Angle 23 x 23 x 1.8mm:- Foundation support frame. MS Flat 48 x 9mm:- Foundation plate support. MS bright material:- Pins made of Dia.25mm. MS plate of 8mm:- Air Walker Pedal L-bend, support. 60mm dia seamless pipe:- Bushes. Bearings:- Permanent lubricated bearings 6205. Closing Caps made from top quality FRP material with 2 mm thickness. HDPE / LLDPE Plastic:- Closing cap, Air Walker Footrest. The pins used are made up of 25mm diameter bright bar. The bearings used be permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from S.S. material. The serclips used for assembly are of 25 mm diameter. The Gym Equipment shall be finished smooth with a primer coating of at least 40 micron followed by epoxy based Powder Coating with Polyester Powder Coating of at least 60 to 70 micron thickness using Exonobel / Berger make paints or its equivalent paints. The holding down/fixing of Gym Equipments shall be embedded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)

DOUBLE LEG PRESS Providing and fixing Double Leg Press made from C- Class GI pipe. Size:- 2044x494x1504mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Sealed Ball Bearing, Steel Seat and Footrest / Foot paddle for long lasting life. The Gym Equipment shall be finished smooth with a primer coating of at least 40 micron followed by epoxy based Powder Coating with Polyester Powder Coating of at least 60 to 70 micron thickness using Exonobel / Berger make paints or its equivalent paints. The holding down/fixing of Gym Equipments shall be embedded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)

HD MINI SKI / SURF BOARD Providing and fixing Surf Board made from “C” Class GI pipe. The center pipe is of 100mm NB made from “C” class GI pipe, and the bottom support of M.S. plate of 250 mm dia & 10mm thickness is welded at bottom. The handle frame is of 40mm NB & 25mm NB made from “C” class GI pipe. The movement frame is made up of 50mm NB “C” class GI pipe. The foundation used for fixing consists of three equal items i.e. 100mm NB made from “C” Class GI pipe, M.S. round plate of 250 mm diameter & 10mm thickness, 25mm X 25mm X 3mm M.S. angle. To join the centre pipe & handle frame seamless pipe of 130mm dia & 3mm thickness is used. For the movement, bushes are used & for it 60mm dia with 3mm thickness & 60mm solid bar is used. The footrests is made from FRP/C.I./Aluminum casting material, its sizes are 320 mm X 270 mm & 5 mm thickness. For support of footrest is 200mm X 250mm with 5mm thickness M.S. Plate and 50mm X 50mm CRC Square pipe with 2mm thickness is used. Closing Caps made from top quality FRP material which is of 2 mm thickness. The pins used are made up of 25 mm diameter Harden bright bar. The bearing used be permanent lubricated sealed bearing of reputed make. The handles used are of Rubber grip. The Nut Bolts used for assembly is made from S.S. material. The bushes (Stopper) used to avoid the collusion made from Polyurethane Plastic material of 50 mm dia. The serclips used for assembly is of 25 mm dia. The Gym Equipment shall be finished smooth with a primer coating of at least 40 micron followed by epoxy based Powder Coating with Polyester Powder Coating of at least 60 to 70 micron thickness using Exonobel / Berger make paints or its equivalent paints. The holding down/fixing of Gym Equipments shall be embedded in cement concrete in the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size).

Providing and fixing Stair Steeper of size approved by Engineer in charge including fixing of Gym Equipments shall be embedded in cement concrete in the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size).

Providing and fixing Cross walker of size approved by Engineer in charge including fixing of Gym Equipments shall be embedded in cement concrete in the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size).

Annual comprehensive maintainance and up keep of the outdoor fitness equipments as item no 1 to 13 for the 2nd year providing at the various location in N.D.M.C area. The annual maintainance shall include all consumable / square part required for comprehensive maintainance etc (Nothing extra shall pe paid for replacement / repair of parts of equipment any number of items to make it in workable condition during the contract period)

Annual comprehensive maintainance and up keep of the outdoor fitness equipments as item no 1 to 13 for the 3rd year providing at the various location in N.D.M.C area. The annual maintainance shall include all consumable / square part required for comprehensive maintainance etc (Nothing extra shall pe paid for replacement / repair of parts of equipment any number of items to make it in workable condition during the contract period)

Annual comprehensive maintainance and up keep of the outdoor fitness equipments as item no 1 to 13 for the 4th year providing at the various location in N.D.M.C area. The annual maintainance shall include all consumable / square part required for comprehensive maintainance etc (Nothing extra shall pe paid for replacement / repair of parts of equipment any number of items to make it in workable condition during the contract period)

Annual comprehensive maintainance and up keep of the outdoor fitness equipments as item no 1 to 13 for the 5th year providing at the various location in N.D.M.C area. The annual maintainance shall include all consumable / square part required for comprehensive maintainance etc (Nothing extra shall pe paid for replacement / repair of parts of equipment any number of items to make it in workable condition during the contract period)

KUNDU ENTERPRISES

anand enterprises