REPAIR MAINT SERVICING OF DG SET INSTALLED AT VARIOUS PLACES IN INF SCHOOL AREA AND MAINT/SERVICING OF OXYGEN PIPELINE AT MH AND OTHER CONNECTED WORKS UNDER GE MIS MHOW

Amount

Maintenance and servicing to DG set once in a three month including attending faults on call basis for normal repairs including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery tereminals, adding distilled water checking the oil, coolent levels Auto Manual functions, contact points , timers of capacity 500 KVA DG set installed at Auditoriun Infantry School, Mhow complete all as specified and as directed by Engr- in- Charge. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) The work of maintenance shalll be carried out through respective authorized dealer/ Highly skill operator/ Mechanic and electrician whose certificate shall be produced to Engineer - in - charge. (iv) Proper record & test results of the same shall be maintained as directed. (v) Work shall be carried out at site at different location

All as per Item No. 1.00 above but capacity 500 KVA DG set installed at NEW MH.

All as per Item No. 1.00 above but capacity 380 KVA DG set installed at IT DIV.

All as per Item No. 1.00 above but capacity 320 KVA DG set installed at Auditorium.

All as per Item No. 1.00 above but capacity 250 KVA DG set installed at MH Mhow.

All as per Item No. 1.00 above but capacity 200 KVA DG set installed at Filteration plant.

All as per Item No. 1.00 above but capacity 200 KVA DG set installed at MH City scan.

All as per Item No. 1.00 above but capacity 180 KVA DG set installed at AMU 10 Mtr Range.

All as per Item No. 1.00 above but capacity 180KVA DG set installed at HD Enclave.

All as per Item No. 1.00 above but capacity 160 KVA DG set installed at Kitchen Eqpt YO-Mess.

All as per Item No. 1.00 above but capacity 160 KVA DG set installed at HD Enclave.

All as per Item No. 1.00 above but capacity 160 KVA DG set installed at Pump House.

All as per Item No. 1.00 above but capacity 160 KVA DG set installed at Stn HQ.

All as per Item No. 1.00 above but capacity 125 KVA DG set installed at HD Enclave.

All as per Item No. 1.00 above but capacity 125 KVA DG set installed at Bercha Pump House .

All as per Item No. 1.00 above but capacity 100 KVA DG set installed at Infantry Library.

All as per Item No. 1.00 above but capacity 100 KVA DG set installed at KLP Signal centre.

All as per Item No. 1.00 above but capacity 82.5 KVA DG set at Infantry Museum.

All as per Item No. 1.00 above but capacity75 KVA DG set at AMU Node-I.

All as per Item No. 1.00 above but capacity75 KVA DG set at AMU Node-II.

All as per Item No. 1.00 above but capacity75 KVA DG set at AMU Node-III.

All as per Item No. 1.00 above but capacity35 KVA DG set at Mhow fort.

All as per Item No. 1.00 above but capacity 20 KVA DG set installed at Infantry MT.

Supply only Diesel filter element with 'O' ring suitable for 320 KVA to 500 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Diesel filter element with 'O' ring suitable for200/ 250 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Diesel filter element with 'O' ring suitable for 160/180 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Diesel filter element with 'O' ring suitable for 100/125 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Diesel filter element with 'O' ring suitable for capacity 82.50/75/35/20 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Spin- on filter element for luricanting oil with 'O' ring suitable for 320 KVA to 500 KVA DG set complete all as specified and as directed. Make:-Cummins, Kirloskar, Greaves, Koel

Supply only Spin- on filter element for luricanting oil with 'O' ring suitable for 200/ 250 KVA DG set complete all as specified and as directed. Make:-Cummins, Kirloskar, Greaves, Koel

Supply only Spin- on filter element for luricanting oil with 'O' ring suitable for 160/180 KVA DG set complete all as specified and as directed. Make:- (As per DG Set Make)Cummins, Kirloskar, Greaves, Koel

Supply only Spin- on filter element for luricanting oil with 'O' ring suitable for 100/125 KVA DG set complete all as specified and as directed. Cummins, Kirloskar, Greaves, Koel

Supply only Spin- on filter element for luricanting oil with 'O' ring suitable for capacity 82.50/75/35/20 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only by pass filter element with 'O' ring suitable for 20 KVA TO 500 KVA DG set comcomplete all as specified and as directed.

Supply only air filter element suitable for 320 to 500 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only air filter element suitable for 250/200 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only air filter element suitable for 160/180 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only air filter element suitable for 125/100 KVA DG set complete all as specified and as directed. Make:-Cummins, Kirloskar, Greaves, Koel

Supply only air filter element suitable for capacity 82.50/75/35/20 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Fan Belt complete suitable for 320 to 500 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Fan Belt complete suitable for 250/200 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Fan Belt complete suitable for 160/180 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Fan Belt complete suitable for 125/100 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Fan Belt complete suitable for capacity 82.50/75/35/20 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 320 to 500 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 250/200 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 180/160 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 125/100 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for capacity 82.50/75/35/20 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 320 to 500 KVA DG set complete all as specified and as directed. Cummins, Kirloskar, Greaves, Koel

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 250/200 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 180/160KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 125/100 KVA DG set complete all as specified and as directed. Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for capacity 82.50/75/35/20 KVA DG set complete all as specified and as directed.Make:- Cummins, Kirloskar, Greaves, Koel

Supply only Engine oil, multi grade premium Genuine oil 20W/ 40 as per manufacturer recommendations in DG sets complete all as specified and as directed. Make :- Indian oil/ Hindustan Petrolium/ Castrol/ BPCL

Supply and applying Petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed. Make :- Indian oil/ Hindustan Petrolium/ Castrol/ BPCL

Supply and fill distilled water for topping up in lead acid batteries complete all as specified and as directed.make -Exide distillo,kia biocare,Air tec

Supply and fill electrolyte of suitable specific gravity for lead acid batteries in sealed container complete all as specified and as directed.Exide distillo,kia biocare,Air tec

M & L for Battery leads of PVC insulated, multistranded, copper conductor of size 70 sqmm of 1.25 mtr long each duly fixed with brass clamps, copper lugs suitable for DG set batteries installed at different locations complete including removal of extg unserviceable one complete all as specified and as directed. Polycab,Havells

M & L for battery teriminal brass clamps including removal of extg unserviceable one complete all as specified and as directed.

M & L for disconnecting all electrical connections from DG set charging alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and taking out the to work shop for rewinding including testing & commissioning complete all as specified & directed.

Taking down turbo charger from engine of DG set of any capacity for servicing and replacement of turbo kit complete all as specified and directed Terbopower,Parco,Crompton

M & L for water temperature guage including sensor and cable complete as per sample including removal of extg unserviceable one complete all as specified and as directed.

M & L for dismantaling the radiator taking to work shop for overhauling & cleaning, de-scaling with acid, removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads,drain out hoses pipe,clips, etc and refixing its original position for following capacities of DG set complete all as specified and directed. (a) 20 KVA DG set to 100 KVA DG set

(b) 125 KVA DG set to 200 KVA DG set

(c) 250 KVA DG set to 500 KVA DG set

M & L for repair and calibration of FIP and injectors from authorised dealer for petty repairs to make the FIP functional as per standard calibration procedure and norms including replacement of minor spares, gasket etc for smooth functioning of FIP and refixing its original position including testing at site for following capacities of DG set complete all as specified and as directed. Note :- A certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor. (a) 20 KVA DG set to 100 KVA DG set

(b) 125 KVA DG set to 200 KVA DG set

(c) 250 KVA DG set to 500 KVA DG set

M & L for Repair/ overhauling of self starting / Exciter system of DG set including replacement of corbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 24 volts with necessary connections incluing testing and commissioing complete all as specified and as directed.

M & L for Repair/ overhauling of self starting system of DG set including replacement of corbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 12 volts with necessary connections incluing testing and commissioing complete all as specified and as directed.

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 20 KVA DG set to 180 KVA DG set including removal of extg unserviceable one complete all as specified and as directed.

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 200 KVA DG set to 500 KVA DG set including removal of extg unserviceable one complete all as specified and as directed.

M & L for fuel steel braided pipe with benjo bolts and washers etc of length 30 cm long including removal of extg unserviceable one complete all as specified and as directed.Make.Cummins, Kirloskar, Greaves, Koel

M & L for fuel steel braided pipe with benjo bolts and washers etc of length 45 cm long including removal of extg unserviceable one complete all as specified and as directed.Make.Cummins, Kirloskar, Greaves, Koel

M & L for fuel steel braided pipe with benjo bolts and washers etc of length 60 cm long including removal of extg unserviceable one complete all as specified and as directed.Make.Cummins, Kirloskar, Greaves, Koel

M & L for canopy hinges for auqastic doors with suitable bolts and nuts of DG set including removal of extg unserviceable one complete all as specified and as directed.

M & L for carrying our repairs to AMF panel / Auto and Manual of up to 500 KVA DG set at various instllation inclduing study, tracing out circuit, testing, repalcing all defective parts, rewinding existing power and control wiring with same cables icluding testing and commissioing complete all as specified and as directed. (Note: Spares like Volt meter, CT, indicator lamp,Ameter ,power contactor required for repair measured in quoted rate

S & F for Time dealy relay suitable for 20 KVA DG set to 100 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make:- Simens/ L&T/ ABB/ C & S

S & F for Time dealy relay suitable for 125 KVA DG set to 500 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make:- Simens/ L&T/ ABB/ C & S

M & L for solinoid switch assembly 24 volts suitable up to 500 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make:- Lucas/ TVS

M & L for solinoid switch assembly 12 volts suitable up to 500 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make:- Lucas/ TVS

M & L for self starter assembly 12 volts complete suitable up to 500 KVA DG setincluding removal of extg unserviceable one complete all as specified and as directed. Make:- Lucas/ TVS

M & L for self starter assembly 24 volts complete suitable up to 500 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make:- Lucas/ TVS

M & L for SMPS (system main power supply) type control unit assembly suitable for 12 volts battery charger for including removal of extg unserviceable one complete all as specified and as directed. make- APC, Toshiba,Emerson.

S & F for battery low maintenance lead acid of capacity 12 volts 180 AH with initial charging including removal of extg unserviceable one, complete all as specified and as directed. Make:- Exide/ AMCO/ Amaron

S & F battery low maintenance lead acid of capacity 12 volts 150 AH with initial charging including removal of extg unserviceable one complete all as specified and as directed. Make:- Exide/ AMCO/ Amaron

S & F connecting and testing open execution on load change over in existing DG set Panel of the following capacity, suitable for 415 volts, 50 Hz, 200 to 630 Amp , 4 pole with extended terminals type, interlocked to prevent opening when the Switch is in ON Position, connecting and testing complete including removal of exiting unsv complete all as specified and as directed. Make:- ABB/ Siemens/ Schneider/Legrand/

Supply and fill genuine coolant in 5 ltrs plastic sealed container for topping up in Radiator of DG set located at different locations as directed by Engr-in-Charge complete all as specified and as directed. Make:- Cummins/Volvoline/Greaves

Supply, laying of 22 OD, 0.9mm thickness copper pipes, for Medical Gases, complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased material conforming to BS-EN 1057/13348, of copper pipe with colour coded etc complete all as specified and as directed.

Supply, laying of 15 OD, 0.9mm thickness copper pipes, for Medical Gases, complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased material conforming to BS-EN 1057/13348, of copper pipe with colour coded etc complete all as specified and as directed.

Supply, laying of 12 OD, 0.9mm thickness copper pipes for Medical Gases, complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased material conforming to BS-EN 1057/13348, of copper pipe with colour coded etc complete all as specified and as directed.

Supply and fix Oxygen outlets/oxygen shutter type specific for the services indicated to accept only compatible quick connect Geometric Index type steel adapters as HTM/NFPA standard as as required and complete all as specified and as directed.

Supply and fix Oxygen flow meters with mask made from brass, chrome plated. It shall be back pressure compensated type having housing of Polycarbonate autoclavable reusable flow range 0-15 LPM. Fitted with matching adopter for oxygen outlet point and humidifier shall be compatible with Flowmeter and reusable and as per specifications and as required with suitable steel adopter etc complete all as specified and as directed.

Supply and fix for Isolation valves 22mm are to be ball valves, with stainless steel balls and PTFE or Teflon seals. They shall be suitable for a working pressure of 10.2 Kg/cm² gauge. Valves shall be fitted into the pipeline by means of capillary hard soldered joints containing silver. it should be open/close with help of handle with rotation of 90 degree etc complete all as specified and directed by Engineer in charge.

Supply and fix for Isolation valves 15mm are to be ball valves, with stainless steel balls and PTFE or Teflon seals. They shall be suitable for a working pressure of 10.2 Kg/cm² gauge. Valves shall be fitted into the pipeline by means of capillary hard soldered joints containing silver. it should be open/close with help of handle with rotation of 90 degree etc complete all as specified and directed by Engineer in charge.

M&L for attending breakdown complaints pertains to exiting unsv oxygen points making into functional of servicing the exiting oxygen gas discharge points of area line alarm etc complete all as specified and as directed.

Supply and fix Vacuum outlets gas specific for the services indicated to accept only compatible quick connect Geometric Index type etc complete all as specified and as directed.

Supply and fix Vacuum Jar with rubber tubings complete with regulator capable of controlling vacuum between 0 to 760 mm Hg and Polycarbonate autoclavable reusable type receiver jar of not less 600 ml. Vacuum regulator shall have a dial gauge, on/off switch, valve control knob and as per specifications and as required. with suitable steel adopter etc complete all as specified and directed by Engineer in charge.

Supply, laying of 16 OD, 0.9mm thickness for vaccum copper pipes, for Medical Gases, complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased material conforming to BS-EN 1057/13348, of copper pipe with colour coded etc complete all as specified and as directed.

Supply , installation, commissioning and testing of Oxygen Manifold: Main confirming to ISO standards with Middle Frames 2 Banks x 4 Cylinder per Each bank Oxygen Manifold (without cylinders) , suitable to withstand a pressure of 145 Kg/cm2, along with high-pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold.Top frame comprising of high pressure copper pipes of size 1/2” I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valves; high pressure copper tail pipes, made of high pressure copper pipe of size 1/4” I.D. x 15 swg. The design of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely. The manifold shall be tested (hydraulically) at 3500 psig and necessary test certificates accompany along with the supply. Only Non Halogenated Polymer materials are to be used in the Non Return Valves supplied along with the manifold. Make: Oxicareengineers/ Globalmedlife Solution/ Lifeline Medisol/ Aktiv/LMPL

sanjay traders

Ms Kailash Chandra Babulal

S.S. Engineers