Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | L1 | Accepted-AOC Being a lowest bidder and reasonable rate quoted | |
| 2 | L2₹21.8 L+₹1.4 L (7.09%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹21.9 L+₹1.6 L (7.69%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹21.9 L+₹1.6 L (7.80%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹22.0 L+₹1.6 L (7.96%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
8 Mar 2022, 6:00 pmClosed
GE PULGAON
GE PULGAON
REPAIRS TO STEEL DOORS VENTILATORS AND OTHER CONNECTED B R WORKS INSIDE DEPOT AT CAD PULGAON
2022_MES_508528_1
8962/PUL/E8
Open Tender
Civil Works
Item Rate
240 days
GE PULGAON
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE PULGAON
₹40,000
Yes
28 Mar 2022
16 Feb 2022
15 Mar 2022
16 Feb 2022
8 Mar 2022
3 Mar 2022
16 Feb 2022 - 2 Mar 2022
Amount
Taking down old wooden doors (single/double shutter ) of any size and any position with complete accessories including chowkhat or frame complete all as specified and directed.
Taking down old wooden ventilators not exc 1.5 Sqm including Chowkhat in any position with complete accessories and wire mesh/wire fabric complete all as specified and directed.
S & F Framed work as in doors or gates of angle or other section FE-410 W (Gde E-250) Quality 'A' with gusset plates, MS Plain black sheet for door, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
S & F Mild Steel flat iron as in hold fast 400mm long embeded in PCC block with splitted ends and in braces in diagonal hand made sliding bolts, clamp hooks and similar work like Banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M & L for PCC 1:2:4 type B1 (20mm graded stone aggregate )as in lintels upto 1..5 m clear span, cills, hold fast for door, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing
M & L for Rendering 10mm C:M 1:6 thick on concrete/stone/brick surface to finish even and smooth witout using extra cement including taking down cement plaster all as specified and directed.
M& L for preparation of new plastered surfaces of wall including cornices if any and applying three coat of white wash including cornices complete all as specified and as directed.
S & F 4.00mm thick plain Sheet glass, ordinary quality and glazing with wooden beads/oil putty in square in exc 0.5 sq.m in each pane including haking out old glass pane complete all as specified and as directed
S & F Wire netting of galvanised steel wire 1.40mm dia and size of mesh in 25mm fixed with tinned tacks of wire staples complete all as specified and as directed
S & F expanded metal weight not exc 4 Kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanised steel staple supplied and fixed complete to wood or steel member etc complete all as specified and as directed
Fixing only in repair expanded metal weight not exc 4 Kg per sqm, cut to length, bent ot shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanised steel staple supplied and fixed complete to wood or steel member etc complete all as specified and as directed
Demolition of brick/stone masonry built in cement mortar including all quoins arches, pillars and precast concrete articles complete all as specified and as directed
Material and labout for random rubble, uncoursed well bonded, bedded and solidly hearted built in M 1:6 complete all as specified and as directed
All as per item No 14.00….. but except stone
Racking out joints/pointing to random rubble masonry or polygonal rubble uncoursed or brought upto course as built in cement or lime mortar to received the plastering complete all as specified and as directed.
M& L for rendering 10mm thick in CM 1:6 on stone masonry surface of internal wall finished even and smooth without using extra cement over a layer of dubbing out of average 10mm thick CM 1:6 complete all as specified and as directed.
M& L for rendering 10mm thick in CM 1:4 on stone masonry surface of external wall finished even and smooth without using extra cement over a layer of dubbing out of average 10mm thick CM 1:6 complete all as specified and as directed.
Dismantling of AC Sheets (corrugated/semi corrugated) as in roof covering including ridges covering complete all as specified and as directed.
Dismantling of wrought iron or mild steel work including grills and gratings, valley gutter, ridges and MS wind ties of any description not other wise provided for all as per site requirement complete all as specified and as directed.
S&F 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof etc fixed with 'L' or 'J' or cranked hook bolts complete all as specified and as directed.
All as per item No 21, herein before but (except sheets) Note old AC sheet obtained vide item No 19 above shall be reused.
Fixing only MS wind ties after fixing of AC sheet/ridges complete all as specified and as directed
S & F MS wind Ties flat iron of specified size for roof including all necessary drilling, bolting or reveting and similar work confirming to FE-290 Gde E 165 complete all as specified and as directed.
S & F in repair 1mm thick Plain, galvanised, mild steel sheeting, sheet with zinc coating @ 275 grams per sqm on both sides in valley gutter with 150mm lap joint water proof as directed cut to size and bent to shape turning up and down including stopped end punching holes and making with head screws to support with bitumen washers complete all as specified and as directed.
All as per item No 25.00 here in before but except sheeting complete all as specified and as directed.
Dismantling of plain or corrugated steel sheeting any gauge, thickness as in wall/cladding complete all as specified and as directed.
S & F plain black 0.63mm thick mild steel sheeting, in ridges, hips, drip and straight flashing complete all as specified and as directed.
All as per item No 28 here in before but fixing only except sheeting complete all as specified and as directed.
Demolition of concrete in ground floors and paving n exc 15 cm thicknes (below or above ground level) complete all as specified and as directed.
M & L for 150mm thick PCC 1:2:4 type BI using 20mm graded stone aggregates as in floor laid in bays including finished even and smooth without using extra cement and including spike rolling to surfaces or making impressions of expended metal white the concrete is green complete all as specified and as directed.
M & L for forming 12 mm thick expansion joint filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A' (thickness of concrete slab is 150mm) complete all as specified and as directed.
M & L for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surface exc 10cm width or girth including preparation of new steel surface complete all as specified and as directed.
M & L for painting with one coat of synthetic enamel paint on old steel painted surface exc 10cm width or girth including preparation of old steel painted surface complete all as specified and as directed.
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth in stone walls complete all as specified and as directed.
Ankit Construction
Arnav Enterprises
M/s VILAS RATAN MENDHE
SHREE CONSTRUCTIONS
M/S Ramakant Chourasia
RAJ ENTERPRISES
MAHARASHTRA ENTERPRISES
Bidder Name
M/S L M Chourasia
Ankit Construction
RAJ ENTERPRISES
SHREE CONSTRUCTIONS
M/s VILAS RATAN MENDHE
M/S Ramakant Chourasia
MAHARASHTRA ENTERPRISES
Arnav Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .