Loading
Loading…
Loading…
Tender Value
₹91.3 L
EMD Value
₹1.8 L
Closing Date
10 Apr 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DRAWING
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
a) Electrical License: The tenderer/Firm should have valid electrical contractor license on their own name or firm name issued by Electrical licensing board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of License shall be uploaded online failing which offer will be rejected.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month before the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc. (with or without supply of items / equipment) for 230V, 1phase or 415V, 3phase system or higher voltages".
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Provision of sleeper matting of remaining wharf, all weather COP, lighting arrangements, hamal shed, CCTV etc at Washim (WHM) goods shed.-Electrical Arrangements.
NED-E-38-2024-25
NED-E-38-2024-25
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹1.8 L
10 Apr 2025
19 Mar 2025
94 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Above/ Below/Par | ||
| — | — | — | 91,28,647.4 | ||
| — | 2.00 | — | — | ||
| Supplying and erecting 16 m (clear height)High Mast (Top-150mm, Bottom- 360mm)with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OH-PL/HM (excluding luminaries). Make: Bajaj/ Philips/CG | — | — | — | 5,02,806 | |
| — | 2.00 | — | — | ||
| Making M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast). | — | — | — | 63,014 | |
| — | 2.00 | — | — | ||
| Supplying and erecting Outdoor Stand Mounted Feeder Pillar for high mast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 no's 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWGCRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete. Make: L&T/Legrand/Havells or similar. | — | — | — | 63,370 | |
| — | 16.00 | — | — | ||
| Fencing arrangements with rail pole of 2 mtrs. length complete including excavation of pit, casting of foundation in 1:3:6 ratio etc., with all connected materials and works (Rail posts will be supplied by Railways and contractor has to make it suitable size of 2 m and his own arrangements for transportation, loading and unloading of Rails to site from nearest Engineering depot). The rail post shall be painted with two coats of red oxide and one coat of Anti corrosion paint. | — | — | — | 16,520.8 | |
| — | 16.00 | — | — | ||
| Supply and fixing of 240W LED type weatherproof flood light fitting including power LED's complete with all accessories and conforming to CEE/SC's specification no. SCR/LED (OD)LIGHT FITTINGS/003 (Amdt.3)-2017 or latest. Make: Bajaj/ Havells/Philips or similar. | — | — | — | 2,54,992 | |
| — | 25.00 | — | — | ||
| Providing & erecting 5 m high (clear height)galvanized OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F on provided foundation as per specification No. OH-PL/OPL. | — | — | — | 3,03,825 | |
| — | 25.00 | — | — | ||
| Providing & casting of M - 20 grade reinforced cement concrete (RCC) foundation suitable for 3m to 5m high octagonal /conical G.I. pole considering the safe soil bearing capacity at site as 10 T/sq m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template as per design in an approved manner. | — | — | — | 71,525 | |
| — | 25.00 | — | — | ||
| Supplying and erecting Street light bracket for erection of Double fitting made from 40mm. dia 'B' class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100mm dia duly welded as per specification no. FG-BKT/BPC. | — | — | — | 27,325 | |
| — | 150.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq mm FRLSH copper PVC insulated wire laid inside pole or any other places. as per specification. | — | — | — | 13,446 | |
| — | 50.00 | — | — | ||
| Supply and fixing of 40 W LED type weatherproof street light fitting complete with all accessories and conforming to CEE/SC's specification no. SCR/LED (OD) LIGHTFITTINGS/003 (Amdt.3)- 2017 or latest. Make: Bajaj/Havells/ Philips. | — | — | — | 1,15,850 | |
| — | 30.00 | — | — | ||
| Supply and fixing of 20 W LED Tube Light fittings conforming to CEE/SC's specification no. SCR/LED (ID) LIGHT FITTINGS/002(Amdt.4)-2017 or latest. Make: Havells/Syska/Crompton/Bajaj or similar | — | — | — | 10,760.4 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 28W 1200mm BLDC Ceiling Fan, BEE 5 star rated with remote control and all connected accessories conforming to class 1 of IS:374/1979 withamdts1 to 6 including labor charges. Make: Gorilla/Havells/ CG/Bajaj. | — | — | — | 22,980 | |
| — | 6.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP asper required to match the background in an approved manner. Make: Legrand/Havells/GM. | — | — | — | 1,296 | |
| — | 5.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP asper required to match the background in an approved manner. Make: Legrand/Havells/GM | — | — | — | 1,410 | |
| — | 30.00 | — | — | ||
| Supply and erection of modular type 5 pin 6Amulti socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM. | — | — | — | 3,570 | |
| — | 100.00 | — | — | ||
| Supply and erection modular type switch 6/10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/ GM. | — | — | — | 4,600 | |
| — | 10.00 | — | — | ||
| Supply and erection of modular type 3 pin 6/16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM. | — | — | — | 1,570 | |
| — | 10.00 | — | — | ||
| Supply and erection of modular type switch16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM. | — | — | — | 880 | |
| — | 100.00 | — | — | ||
| Wiring points: Provision for wiring with two runs of 1.5 sq mm 1100 V and one run of flexible copper conductor 1.5 sq mm 1100 VPVC insulated wires (phase, neutral and earth) in concealed PVC conduit pipe/casing and capping with 6A flush modular type switch control including 2- way switches wherever required, 3 pin ceiling rose and modular type plate cover to MS switch control box including all labor charges complete for fan points, light points, bell points, exhaust fans point etc. All the material used shall be of ISI approved make. | — | — | — | 43,300 | |
| — | 25.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/ inside pole/Busbars or any other places. as per specification. Make: Havells/Finolex/Polycab. | — | — | — | 2,241 | |
| — | 4.00 | — | — | ||
| Supply, fixing, connecting of 360° Ceiling Mounted Occupancy Sensor - dual Sensors that work on PIR & Ultrasonic Technology. Occupancy Sensors covers both Micro Motion& Heavy Motion. Operating Volt: AC 220-250V 50Hz-60Hz., Load power: Up to300/1200W Max, Ambient Light: 3-2000(Adjustable), Load type: Bulb, LED light, CLF, fans, etc., Detecting distance: 0 12M,Detecting Angle: 360 Degree., Installation Height: 2.2-4 Mr. Motion Detection Speed:0.6 1m/s, Power Cusumption:0.1W (static) &0.4(Work), Working Humidity: less than 93% RH, Delay: 10 Seconds -7 Minutes(Adjustable). | — | — | — | 11,296 | |
| — | 70.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panelboards etc. including cutting, bending, drilling, welding, riveting etc. treated with anti-rust treatment and duly power coated asper the above specification. | — | — | — | 16,590 | |
| — | 10.00 | — | — | ||
| Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% copper purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete. | — | — | — | 10,760 | |
| — | 3.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 40-160 A range; 4Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make: L&T/Legrand/Havells. | — | — | — | 68,073 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 160-400 A range; 4Pole, MCCB suitable for operation on 750V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make: L&T/ Legrand/Havells. | — | — | — | 43,686 | |
| — | 8.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB), with 2ways for incoming and 10 ways (10 poles)for outgoing SP MCBs, with door, 1.2mmthickness surface / flush mounted, IP 43Protection on iron / GI frame as per specification no. SW-SWR/MCBDB Make: Legrand/Havells/L&T. | — | — | — | 11,960 | |
| — | 2.00 | — | — | ||
| Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/flush mounted with 4 ways for incoming and 12 ways for outgoing SP/TPMCB's on iron frame/laminated board as per specification No. SW-SWR/MCBDB Make: Legrand/ Havells/L&T. | — | — | — | 4,628 | |
| — | 2.00 | — | — | ||
| Supply, erection and marking TPN MCB 63A,10 kA C-series in provided distribution boards per specification No. SW-SWR/MCB Make: Legrand/ Havells/L&T. | — | — | — | 2,572 | |
| — | 12.00 | — | — | ||
| Supply, erection and marking DP MCB 16-32A, 10 kA B series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand/Havells/ L&T | — | — | — | 5,664 | |
| — | 80.00 | — | — | ||
| Supply, erection and marking SP MCB 16-32A, 10 kA B series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand /Havells/L&T | — | — | — | 14,160 | |
| — | 1000.00 | — | — | ||
| Supply and laying of 4 core 120 sq mm crosslinked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire or steel strip and with Aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part- 1)/1988 with amdt. no. 1, 2& 3 (reaffirmed 2005) or latest. | — | — | — | 5,83,870 | |
| — | 1200.00 | — | — | ||
| Supply and laying of ISI marked 4 core 50 sq mm cross linked polyethylene (XLPE)insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire or steel strip and with Aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988with amdt. no. 1,2 & 3 (reaffirmed 2005) or latest. | — | — | — | 3,28,860 | |
| — | 1200.00 | — | — | ||
| Supply and laying of ISI marked 4 core 25 sq mm cross linked polyethylene (XLPE)insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire or steel strip and with Aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988with amdt. no. 1,2 & 3 (reaffirmed 2005) or latest. | — | — | — | 2,08,536 | |
| — | 3000.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 32,340 | |
| — | 2600.00 | — | — | ||
| Making trench in soft soil of suitable width and depth as per IS for laying provided LT cable including sand cushioning, bricks and laying of cable warning tape complete as per specification. | — | — | — | 3,76,376 | |
| — | 300.00 | — | — | ||
| Making the trench in Hard murum/Tar Road of suitable width and depth as per IS for laying provided L.T cable and covered with min 150 mm dia half round hume pipe including sand cushioning, bricks and laying of cable warning tape complete as per specification. | — | — | — | 78,675 | |
| — | 100.00 | — | — | ||
| Horizontal drilling of bores for laying of LT UG cables across the road/track | — | — | — | 1,77,500 | |
| — | 100.00 | — | — | ||
| Supply of 50 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1 (2004) and fixing with suitable clamps on wall/building including laying of cable through GI pipe. | — | — | — | 98,947 | |
| — | 40.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification | — | — | — | 1,39,935.2 | |
| — | 1.00 | — | — | ||
| Supply and installation of stainless steel sand/mud proof submersible pump of 3HP , single phase vertical type energy efficient submersible pump. | — | — | — | 33,229 | |
| — | 1.00 | — | — | ||
| Supply and installation of single phase, 3 hp DOL pump starter. | — | — | — | 2,650 | |
| — | 400.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 4 Sq.mm copper flat cable. | — | — | — | 38,000 | |
| — | 30.00 | — | — | ||
| Nylon rope for pump lifting and lowering. | — | — | — | 5,400 | |
| — | 1.00 | — | — | ||
| "Supply of ISI marked Storage Type Self Contained Drinking Water Cooler with Inbuilt RO or UV Water Purifier Ecofriendly (Non-CFC Refrigerant R-134a) and Energy Efficient Compressor of Cooling Capacity:150 Ltrs/Hr, Storage Capacity: 150 Ltrs, suitable for operation on 230V (+/- 10%, 50Hz, Single Phase AC Supply and conforming to IS: 1475 (Part-1): 2001 and as per specification enclosed. Make: Satyaneer/Blue Star/SIDWAL/VOLTAS". | — | — | — | 65,000 | |
| — | 700.00 | — | — | ||
| Supply and erection of LED Canopy type High Bay light 100Wconforming to CEE/SC's specification no. SCR/LED (ID)LIGHT FITTINGS/005(Amdt.3)-2023 with IP 65protection including all necessary items for fixing in shed. Make: Philips/Bajaj/Havells or similar. | — | — | — | 50,40,000 | |
| — | 700.00 | — | — | ||
| Fixing, supply of wiring material and wiring in PVC conduit pipe with 1.5 sq. mm copper conductors with all connected materials connecting and commissioning of Light assembly/fans in the COP/FOB including supply of PVC Conduit pipe (ISI mark)and all connected accessories. PVC insulated copper wire shall conform to specification IS:694/1977 and PVC conduit shall conform to IS: 9537. | — | — | — | 2,04,659 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .