RENOVATION OF CERTAIN ROOMS OF TRAINING WING AND CERTAIN MAJOR REVENUE WORKS AT IAM UNDER AGE B R II OF GE AF MARATHAHALLI BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar beddings (but not backing), removing rubbish of the premises complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm grade aggregate) as in levelling coarse in flooring finished even and fair under floor finishes complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface 350x250x7 mm / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat of 10 mm thick cement plaster in CM 1:4 complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement clurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per item No.5 above but on vertical surfaces such as skirtings, dados etc. over 10 mm thick backing coat in cement plaster in CM 1:4 complete all as specified and as directed.

S&F Light shade Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per item No.7 above but on vertical surfaces such as skirtings, dados etc.over 10 mm thick backing coat in cement plaster in CM 1:4.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement admixture of pigment to match the shade of granite stone including grinding and polishing over 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and as direced.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down cement plaster on brick or stone walls or RCC parapet walls, facia chajjas etc. of any description and in any position including raking out joints, hacking for key, scrubing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & fair (without using extra cement) complete all as specified and as directed.

M&L for applying 3mm thick wall care putty on wall all as specified and as directed complete all as specified and as directed.

M & L for two coats of OBD over a coat of alkali resistant priming paint on newly plastered wall surfaces, preparatory to distempering complete all as specified and as directed

M&L for Preparation of old decorated ceiling surfaces including brooming down or steel wire brushing, scarping down smoke soot, module, mass and applyng one coat of oil boud destemper on ceiling complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each. complete all as specified and as directed.

S&F for Aluminium (Die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width of weight between 61 to 81 kgs and fixed complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board shutter 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face in frame at site as per specification and drawing complete all as specified and as directed.

S&F 150mm long Aluminum, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm stainless steel cold rolled butt hinges, medium weight. complete all as specified and as directed.

S&F 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 200mm brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixing bolts and sliding bolts of extruted sectionsor cast aluminium alloy complete all as specified and as directed.

S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 300 mm size complete all as specified and as directed.

S&F Butt hinges, heavy weight, cold rolled, mild steel, 125mm size complete all as specified and as directed.

S&F Extruded brass handles, fabricated type polished, 150 mm size complete all as specified and as directed.

S&F Floor door stopper of brass body & tongue with hard drawn steel spring, over all length of cover plate 140mm, complete all as specified and as directed.

S&F High density polyethylene pipes (HDPE) 15mm bore of pressure rating 6 kgf/cm2 with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.

All as per item No 29 above, but , 20mm dia complete all as specified and as directed.

All as per item No 29 above, but, 25mm dia complete all as specified and as directed.

M&L for prelaminated particle board 12mm thick, interior grade, prelaminated both side with decorative choice lamination complete all as specified and as directed.

M&L for 9 mm thick Perlaminated particle boards, interior grade perlaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.

M&L for 18/19mm thick Perlaminated particle boards, interior grade perlaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.

S&F for sheet glass 5.5 mm thick, ordinary quality, ground or obscured or forested, on one side & glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F of 4mm thick sheet glass, ordinary and glazing with oil putty in squares n.exc 0.5 sqm in each pane including hacking out old broken glass of any thickness, size quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed .

S&F in repairs for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as direced.

S&F in repairs for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches/floors etc complete all as specified and as direced.

S&F 110mm dia PVC (SWR) bends in any radius complete all as specified and directed.

S&F PVC(SWR) bends 75 mm dia in any radias complete all as specified and directed.

M&L for PVC (SWR) floor trap plain 75mm dia pointing with solvent cement complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 15 mm dia pillar taps cast copper alloy, fancy type, chrominium plated screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F 15mm stop valve/angle valve cast copper alloy fancy type chromonium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions fixed in repairs complete all as specified and as directed.

S&F bib taps 15mm bore cast copper alloy, fancy type chromonium plated screwed for iron pipe fixed in repairs complete all as specified and as directed.

S&F Soap dish, Vitreous china white, approximately size 160x160x90 mm embedded in the wall complete all as specified and as directed.

S&F fixed in repairs vitreous china, squatting pan, ‘orissa’ pattern size 580 x 440 mm white with integral foot rests including connection to drain and to flushing pipe, antisyphonage pipe, ‘P’ (or) ‘S’ Trap complete including filling required concrete complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) as in repairs complete all as specified and as directed.

S&F plastic water closet seat & cover for pedestal pan, white colour, closed pattern with flat bottom and cover and mild steel chromium plated hinging device fix to WC complete all as specified and as directed.

S&F in repairs PVC vaveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 10 ltrs capacity all as specified complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, white flat back, size 630 x 450 mm including bracked complete all as specified complete all as specified and as directed.

S&F in repairs 32mm dia waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as apecidied and as directed.

S&F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe) Fixed in repair complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe for half stall urinals complete all as specified and as directed.

S&F 100mm brass Mortice lock vertical type 4 lever incl plate and two keys all as specified and as directed.

S&F hand shower (Health Faucet) with 8mm dia 1.20 mtr long stainless steel flexible hose and wall hook fixed with brass screws complete all as specified and as directed.

S&F Stainless steel gratings 100 mm dia complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc15cm thickness (below or above ground) complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded aggregate) in sub base of floor & paving all as specifed and directed.

M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm grade aggregate) as in sub base under floor finishes complete all as specified and as directed.

M&L for 1:3:6 type C-1 (using 20mm graded aggregate) Pre-cast cement concrete block masonry with solid blocks, exc.10cm in width and setting in mortar 1:6 complete all as specified and as directed.

S&F 2nd class hard wood plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L for 2nd class hard wood plain fillets square, rectangular or triangular in section clean sawn, secured with nails brads, exc 6 & n.exc 13 sq cm complete all as specified and directed.

Supply and fixing 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, Factory made complete all as specified and as directed.

S&F Anodised aluminium frame for doors, partitions with one or more rebates including jointing cleat for fixing etc complete all as specified and providing powder coating.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified with powder coating .

S&F Anodised alluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws, anodised alluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21,100mm long (2 Nos.) suitable handle (1 no.) complete all as specified.

M&L for 4mm thick sheet glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactures Complete all as specified and as directed

S&F Anodised alluminium grill for windows and ventilator aluminium sections weighing 2.25 Kg/Sqm, including anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.,) or insulation boards/ slabs /blankets any thickness, including cover fillets complete all as specified and as directed.

S&F Arm strong approved minerals fibre ceiling tiles with hot dipped galvanized steel grid frame work, surface chemically cleaned copping, prefinished in black polyster paint, main Tee of size 33x24mm at every 1.20m c/c rotary stitched cross tee of size 24x28mm, c/c to form a grid of size 600x600mm, wall angle 40x25mm and suspended the grid from roof using using 3.5mm GI rod and 6mm nylon rawl plug at every 1200mm intervals, supply and laying Armstrong minerals accostics ceilings of size 600x600x12mm thick (type NEW LOTUS RH 70 MODEL) over the framed grid, the board shall have rating of 60 min as per BG 47923 of 1987, light reflection above 80%, noise reduction coefficent (NRC) of 0.50 to 0.60 sound attention of 32 decibles, humidity resistance up to 90% at 50 degree C, including making provisional opening complete all as specified and as directed.

S&F 75mm width flaps Butt Hinges hinges, cast Brass, with mild steel hinge pin, bright polished and fixed, type B-12 or Magnetic type complete all as specified and as directed.

S&F for 75mm Rim latch with two levers of brass body, stove enameled finish with brass knob or lever handle complete all as specified and as directed.

M&L for 2 lever brass locks, Cupboards, grade I, size 50mm complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for 150mm thick soiling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed & rolled & consolidated to required gradient & cambercomplete all as specified and as directed.

M&L for 100mm thick Cement Concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub-base complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Gradewith grey cement and no pigment complete all as specified and as directed.

M&L for sand filling under floor finishes or in Foundation including watering and consolidation complete all as specified and as directed.

M&L for removing excavated soil material exc. 250m but n. exc 500m and depositing complete all as specified and as directed.

M&L for 1:2:4 type B-1 (using 20mm graded aggregate) as in copings and kerb stones etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & fair (without using extra cement) complete all as specified and as directed.

docileworx

Shanthi Construction

PRAGATHI BUILDERS