REPAIR TO ROOFING LEAKAGE AND SEEPAGE OF SUNKEN PORTION, PLUMBING WORKS INCLUDING CLEANING OF WATER TANKS IN THE AREA OF AGE BR-I UNDER THE GE 874 EWS

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-1 1:3:6 (20mm graded stone aggregate) as in sub base complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for providing pre cast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L for b M&L for brick work sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement, mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L for rendering 10mm thick on fair face in Cement mortar 1:4 on brick walls finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick walls finishing even and fair including necessary scaffolding work etc complete with water proofing compound all as specified and directed. (Note: WPC will be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali resistant primer including chalk whiting complete all as specified and directed.

M&L for preparation of plastered surfaces on walls, chajjas, filling of hair line cracks with cement and applying two coats of cement based paint including necessary scaffolding complete all as specified and as directed.

M&L for special water proofing treatment for sunken portion of WCs/ Bath & toilet executed in following stages:-

Stage-1:- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs of STP Ltd in the proportion / quantity all as per manufacture instructions. Stage-2:- Providing 10mm thick plaster in cement mortar 1:3 mixed with integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/ quantity all as per Manufacture instructions. Stage 3:- Apply Dr Fixit Prime seal primer or Equivalent of STP Ltd (and allow to dry for 8 hours) all as pr Manufacturer's instructions. Stage 4:- Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per Manufacturer's instructions. Stage 5:- Rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd all as per Manufacturer's instructions. Stage 6:- All CI joints shall filled with mixture of cement fine sand plaster seal of STP Ltd or Dr Fixit Pidicrete URP all as per Manufacturer's instructions. Stage 7:- Making holes in wall and fixing 600mmm long 20mm dia medium grade GI spout for draining the surplus water if any. Stage 8:- Carry out ponding test for 48 hours to ensure water tightness of repaired sunken portion. Note:- (a) Only plan area shall be measured and accorded for payment under this item. (b) Depth of sunken portion of WC's /Baths shall be upto 35cm, which is to be taken into account while quoting the rate against this item (c) Rate quoted by contractor shall be deemed to be included for all the horizontal and vertical treated surfaces of sunken portions of WC & Bath.

Dismantling timber scantlings, in any description, fixed in any position complete all as specified and directed

M & L for second class soft wood clean swan in timber Scantling complete all as specified and directed.

Description all as per item No 18 above, but except timber.

Dismantling in fillets ,rails, posts, rafters, purlines, etc in any position complete all as specified and directed

S&F for plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads sectional area exc 3 Sqcm & nexc 6 Sqcm, second class soft wood (Kail) complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed

S & F for 20mm thick, second class soft wood boarding, planed one side, with butt joints and fixed with nails in facia, eaves boarding, complete, (except flooring and skirting) complete all as specified and directed.

S& F in repairs 2nd class soft wood weather boarding clean sawn, plain, 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

Description all as per item No 24 above, but except boarding, complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation board /slab/blankets, any thickness, including cover fillets complete all as specified and directed.

M & L plywood,6mm thick grade, BWR type BB fixed with nails to timber frame work in ceiling complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over one coat of pink primer on new wood surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not other wise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of mild steel work of any description such as pipe, gates work, frame bird proofing etc, including necessary straightening of bends complete all as specified and directed.

S&F for Mild steel works in roof trusses (framed) trussed, Purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, Angle, Channel or flat section)including distance pieces, cleats, welding and bracing etc, Fe-410W (Gde-E-250) quality-B complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description , over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish of the premises etc and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) 25mm thick as in flooring finishes the surfaces even and fair without using extra cement complete all as specified and directed.

M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18sqm n. exc 0.36Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 laving floor finished complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface (Coloured) 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in cement mortar 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm (light shade of square/rectangular) polished area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 laying floor finished complete all as specified and directed.

M&L Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 laying floor finished complete all as specified and directed.

Dismantling of roof sheet (corrugated or semi corrugated etc) in roof covering fibre sheets complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/clading to wall, fixed with self tapping screws, complete all as specified and directed.

Taking down chowkat with shutters n. exc.1.5 Sqm (w/o taking off shutters from chowkhat) including all fitting complete all as specified and directed.

S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing etc complete all as specified and as directed.

S&F for Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS etc complete all as specified and as directed.

S&F stainless steel butt hinges, 100mm, medium weight complete all as specified and directed.

Supply and fix extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept. bore of pipe 15mm complete all as specified and directed.

S&F 15 mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F PVC valve less syphonic action type flushing cistern 10ltr capacity, low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints, complete all as specified and directed.

S&F in repair 15mm size PVC connection with PTMT nuts 600mm long complete all as specified and directed.

S&F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type complete all as specified and directed.

S&F in repairs CP stop valves/angle cock 15mm bore fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair PVC (PTMT) angle cock of any screwed for iron pipe and fixed (min wt 15mm-90gms) complete all as specified and directed.

S&F in repairs stop valves PVC (PTMT) type coloured 15mm bore screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repairs CP long nose bib tap 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs bib tap PVC (PTMT) type coloured 15mm bore screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F low density polythene pipes (LDPE) 32mm of pressure rating 6Kg/cm2 fixed to walls etc, complete all as specified and directed.

S&F CI floor trap 75mm dia outlet with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and directed.

S&F CI floor trap 100 mm dia outlet with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and directed.

S&F 75 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc complete all as specified and directed.

S&F 110 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc, complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, single Y equal or unequal with access door etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single Y equal or unequal with access door etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single T equal or unequal with access doors etc complete all as specified and directed.

Cleaning of PVC water tank capacity n. exc 500 litres at any height (on accessible/inaccessible roofs) by removing all scale, dirt, mud, any foreign material and removing accumulated silt, other dirty substance, algae, fungus and other bacterial material from sides/bottom of tank cleaning shall be done by draining / pumping out water/sludges from bottom removing edge and other growth from wall/ floor/ roof by high pressure cleaning method with jet set and again cleaning tank with fresh water. Disinfecting by using UV radiator and approved chemical (Chlorin) after cleaning writing letter/figures on black ground with white enamel paint of following capacity cleaning of PVC every six months:- (i) Date of cleaning. (ii) Next due date of cleaning. (iii) Remove of existing lettering/figures completely.

All as per item No 68 above but Cleaning of PVC water tank of capacity exc 501 litres but n.exc 1000 litres.

All as per item 68 above but Cleaning of PVC water tank capacity exc 1001 litres but n.exc 2000 litres.

S&F 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs wash hand basin vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper nut including brackets, 32mm waste fittings and waste pipe of 32mm bore, brass chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed.

S&F in repair brass Chromium plated towel rail 20mm dia 'D' type 600mm long between flanges, Cat No BA-01 of with and including Chromium plated brass screws etc complete all as specified and directed.

S&F in repair Health Faucet with 1.5mtr tube & hook Cat No BEA-40 of Prayag Polymers Pvt Ltd complete all as specified and directed.

S&F for19/ 20mm dia stainless steel curtain rods with fixing fancy brackets, screws etc complete all as specified and directed.

MS RJ BUILDERS (BID ID -3280267)

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3280397)

M/S MAHIR MUNEER (BID ID -3280323)

Bidder Name

M/S SAJAA CONSTRUCTION COMAPNY

M/S MAHIR MUNEER

M/S MUNEER AHMAD WANI CONSTRUCTIONS

MS RJ BUILDERS