PERIODICAL SERVICES OF MD ACCN IN AKHNOOR MIL STATION UNDER GE (SOUTH) AKHNOOR

Amount

Disconnecting existing tanks, capacity exceeding 250 liters but not exceeding 500 liters setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc. from tanks and mouths of circulating pipes, etc.( including bleaching powder) complete all as specified and directed.

Disconnecting existing tanks, capacity exceeding 500 liters but not exceeding 1000 liters setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc. from tanks and mouths of circulating pipes, etc.( including bleaching powder) complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltr hoisted and fixed in position. Old Dismantling water tanks capacity exc 250ltrs and n exc 500ltrs and removing to store. all as specified in SSR Part

M&L for cement concrete as in copings benching, bed plates and the similar including, wheathering, slightly rounded and chemfered edges throating, as directed including demolition of old and cleaning of surfaces type B 1(1:2:4) 20mm graded aggregates.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed by Engineer-In-Charge.

Rendering 15mm thick on bricks or concrete masonry surfaces, on walls, in cement mortar 1:6, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

Rendering 5mm thick on any type of surfaces, on ceiling, in cement mortar 1:3, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, including mixing water proofing compound @ 3% by weight in cement, rendering is to be finished even and smooth (without using extra lime or cement), complete all as specified and as directed by Engineer-In-Charge. Note: Cost of water proofing compound shall deemed included in quoted rates.

M&L for applying two coats of cement base paint over a coat of chalk whitening, primer on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of cement paint, complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Oil emulsion distemper (white/tinted) etc complete all as specified and as directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment and Providing and applying plaster of paris putty of 2 mm thickness over on scrapped or uneven surfaces to match with the existing surfaces before applicaiion of white wash/distemper/ cement base paint etc complete all as specified and as directed

Preparation of Old plastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion after preparation of surfaces, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of Old/decorated plastered or unplastered surfaces of ceiling and applying one coat of white(Lime) washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new/old plastered surfaces of walls and applying two coats of distemper oil emulsion after preparing of surfaces, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new/old plastered surfaces of walls Priming plastered and other surfaces with alkali resistant priming paint, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment, and applying one coat of emulsion(Apex), complete all as specified and as directed by Engineer-In-Charge.

Preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of cement paint, complete all as specified and as directed by Engineer-In-Charge.

M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.

S&F as in repairs PVC float valve 15mm/20mm all as specified & directed by engr-in-charge.

S&F Syntex cover for 300/500/1000 ltr water tanks all as specified & directed by engr-in-charge.

Preparation of old painted wood/ wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat(finishing coat) of synthetic enamel paint, complete all as specified and as directed by Engineer-In-Charge. (make for synthetic enamel paint :Apcolite pf asian, Superlac of Shalimar,Nerolac of good luck Nerolac, Berolac of Johnson & Nicholson.

Preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying one coat(finishing coat) of synthetic enamel paint, complete all as specified and as directed by Engineer-In-Charge. (make for synthetic enamel paint :Apcolite pf asian, Superlac of Shalimar,Nerolac of good luck Nerolac, Berolac of Johnson & Nicholson.

S&F epoxy powder coated mild steel 20mm pelmet rods with brackets including pair of fancy type finnals complete fixed in repair, complete all as specified and as directed by Engineer-In-Charge.

Taking up or down steel tubing of 15mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed.

Taking up or down steel tubing of 20mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed.

S&F for Tubes, 'medium grade' galvanised, 15mm bore, ISI marked, making concealed, with all fitting such as bends, tees, elbows, sockets, nipples, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, including cutting and chasing the any type of surfaces, complete all as specified and as directed.

ditto-all as item no 28 but 20mm bore

Amount of Schedule of credit of for Rs 9,408.00 shall be deducted from quoted amount.

bushan kumar (BID ID -3168055)

PACHNANDA BUILDERS (BID ID -3173668)

M/s Vishal Engineers (BID ID -3173615)

Deepak Enterprises (BID ID -3173818)

GHULAM NABI GILKAR AND CO (BID ID -3168209)