SPECIAL REPAIR TO BUILDING NO P-03 AT VOC UNDER GE CENTRAL BANGALORE

Amount

Demolition of stone slabs of any description and thickness in floors/ walls laid, bedded and pointed in any mortar etc complete including removing the same and debrises outside MD land all as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc and removing debris outside MD land complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) and removing debris outside MD land complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) any description and in any position not otherwise specifically provided for such as in roof/chajja padding etc complete including removing the materials out side MD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing serviceable tiles to MES store and the rubbish/debrises out side MD land complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing debris outside MD land complete all as specified and directed

Taking down chowkats or frame, not exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exceeding 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Taking down shutters, exceeding 1.0 sqm but n.exc. 2 Sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.

Cutting/chipping the spalling concrete surfaces of columns, beams, facias, slabs, chajjas & cantilevers etc, and trimming cleaning the surfaces of any thickness all as specified and directed including M & L for applying epoxy treatment for bonding old demolished concrete surfaces and application of one coat of notozinc primer to exposed reinforcement and providing 20mm thick plastering in CM 1:4, finished even and smooth without using extra cement to level the surfaces etc including necessary csafolding as required at site complete all as specified and directed.

M & L for pressed steel frame of size 125X60 mm made out of 1.25mm thick plain black steel sheet for door with one or more rebates including fixing by welding necessary lugs, hinges, lock plate and PCC filling into frame using plain cement concrete 1:3:6, type C1 etc complete all as specified and directed. NOTE : - Butt hinges shall be measured and paid separately as supply only under respective item BOQ.

S & F well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints including treating the timber libarally brushed at least twice with oil or kerosene based solusion of chlorophyrifos 20EC 1.0 % (by weight) concentration complete all as specified and as directed.

M&L for factory made 35 mm thick 2nd class hard wood glazed and skeleton shutter open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters in SSR Part-I Section-8 Clause 8.24 (a) supplied and fitted to chowkats. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete, as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S & F box type steel windows/ventilators double side shutters ie glass and wire mesh shutter, including pressed steel frames made out of CRCA sheet of 80X60X1.25mm thick double rebated, shutters box type made out of CRCA sheet of 40X20X1.0mm thick, 12mm square guard bar/grill welded to steel frame, window shutters side hung, ventilator shutters top hung, box type hinges, aluminium die cast handles for glass shutters, iron flat type handles for mesh shutters, telescopic stays etc complete all as specified in TD drawing No TD/539 dated 09.02.2004 of Chief Engineer Chennai Zone and as directed. NOTE:- (i) Qouted rate under this item shall deemed to be inclusive of steel frame, both side steel shutters, guard bars/grills, handles, stays, beading/fillets for fixing glass/wire mesh including cost elements for fixing of glass & wire mesh and mearurement/ pament shall be considered as one unit by comprising all these elements. (ii) Glass and wire mesh shall be measured and paid as supply only underseparately under respective item.

S & F Steel ventilator top hung fixed type shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S & F 50 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply only 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 100 mm size, butt hinges, stainless steel with cadmium coated screws complete all as specified and directed.

S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F 100mm aluminium anodised, hasp and staple, safty type, with hinge pin, including bolt to hinge plate and fixed with screws complete all as directed.

S & F continuous (Piano) hinges, mild steel bright finished or electro galvanised, width of flaps 40mm when open complete all as directed.

S&F in repair mortice lock, 65mm size, brass, vertical type, 4 lever with minimum 2 keys all as directed.

S&F in repair brass cromium plated, 15mm dia hole, magic eye all as directed.

S & F in repair brass drawers/lockers/cupboard lock, grade - I, size 50mm, 4 lever of approved make and design as directed by Eng-in-charge.

S&F in repair 20mm dia aluminium anodised powder coated decorative type curtain rods all as specified and directed.

S&F in repair steel decorative type curtain brackets all as specified and directed.

Supply only 4.0 mm thick, sheet glass, ordinary quality including oil putty/timber beads in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply only stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F 4 mm thick, sheet glass, figured/ pin headed glass and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

M & L for cutting hole in stone/brick wall built in cement mortar for insertion of hold fast including making good dismantled portion by using plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) and plastering, finishing the surfaces to match with existing etc complete including necessary form work all as specified and directed.

S & F Mild steel small articles using flat iron such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290, Gde E-165 including retaining with tar or coat tar black paint complete all as specified and as directed.

M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one sides with decorative choice lamination and other side balancing white lamination and 3mm thick teak wood beading/edging fixed with invisible screws to timber frame work, complete, as specified and directed.

M & L for Hardcore of broken/crushed stone aggregate of gauge n.exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for ATT by treating the soil along wuth external perimeter of building at the rate of 2.50 litres of emulsion per metre of the perimeter wall. Make name ATT chemical :- DURSBAN/LETHAL/TRISUL

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in base of flooring, level course etc and finished the surface fair to receive top layer screed bed complete all as specified and directed.

M & L for granite stone slab, table rubbed and polished (of any type) 18 to 20mm thick, machine cut, as in steps, jambs, pillars, cooking platform and the like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar 1:4 & cutting, polishing complete all as specified and directed.

M & L for marble stone slab, table rubbed and polished (of any type) 18 to 20mm thick, machine cut, as in steps, jambs, pillars, cooking platform and the like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone including 15 mm thick screed bed in cement mortar 1:4 & cutting, polishing complete all as specified and directed.

M & L for non-skid, ceramic, joint free of matt finish, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, jint free of matt finish, coloured tiles 8 to 10mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for ceramic, coloured tiles 7 to 8 mm thick as in skirting to match the length of floor tile procured under No 51 above including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed ceramic, coloured tiles 7 to 8 mm thick area of each tiles not less than 0.06 sqm as in skirting including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed ceramic, coloured tiles, 600X300X10mm as in skirting/dado/steps including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Vitrified ceramic, designed, double charge, coloured, tiles, 10 mm thick, (square/rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors, etc including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

All as per item No 55 above/herein-before but in vertical surfaces including skirting, dados and risers to steps etc to match the length of floor tiles including 10 mm thick screed bed in cement mortar 1:3 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M&L for stone masonry walling of square rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for precast cement concrete solid building blocks or slabs as in masonry, 10cm thick, type C1, 1:3:6 (20mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M & L for racking or cutting out joints and decayed mortar/ pointing to squared rubble stone masonry wall, coursed or uncoursed built in cement mortar not less than 12mm deep, washing the joints including cleaning properly by washing the joints and removing the rubbish off the premises, keeping the surface to be pointed wet for 2 days prior to re-pointing complete all as directed.

M & L for dubbing out average 10mm thick on irregular faces of stone walls external surfaces in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4 on stone masonry wall surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two layer (10mm + 5mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceilings (sunshed, chajja, fins etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

"Supply only" integral water proofing compound (ISI marked) complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey)

M & L for roof treatment by providing 25mm thick padding in PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) finished fair and even and rendering 10mm thick in CM 1:4 mixed with water proofing compound by weight of cement as per manufacturer's instruction, applying oil bound bitumen primer @ 1.5 Kg/Sqm and providing 3 mm thick APP membrane weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 180 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /Sqm on top of membrane surface and then finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as specified and as directed. NOTE: - Water proofing compound shall be measured and paid separately under respective item.

M & L for roof treatment by providing 25mm thick padding in PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) finished fair and even and rendering 10mm thick in CM 1:4 mixed with water proofing compound by weight of cement as per manufacturer's instruction, applying oil bound bitumen primer @ 1.5 Kg/Sqm and providing 3 mm thick APP membrane weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 180 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /Sqm on top of membrane surface complete all as specified and as directed. NOTE: - Water proofing compound shall be measured and paid separately under respective item.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and no pigment and laid over screed bed 15mm thick CM 1:4 etc complete all as directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of exterior weather coat over a coat of 1mm thick external wall care putty over one coat of alkali resistant priming paint complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over 1 to 2mm thick wall care putty over a coat of primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer to plastered and other surfaces including providing wall care putty two coats in minimum 1mm to 2 mm thick on plastered surface complete all as specified.

M & L for preparing old plastered surfaces of walls by complete removal of existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparing old plastered surfaces of walls by complete removal of existing treatment and applying two coats of white wash complete all as specified and directed.

M & L for Preparation of old or previously treated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old painted surfaces of wood of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L for plain cement concrete 1:5:10 type E2 (using 40mm graded stone aggregate) as in filling and mass concrete in sunken floors all as specified and directed.

Taking up or down 20mm bore, Steel tubing and connections.

Supplying and laying of 20mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F rotational moulded polyethylene water storage tanks 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple, union suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head including taking down old unserviceable PVC tank of same capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 750 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple/ union suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head including taking down old unserviceable PVC tank of same capacity complete all as specified and directed.

S&F in repair plate rack made of stainless steel fixed to wall, approximate size 900mmX 900mm X 250mm (36x36x10 ench) Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe approximate overall size 915mm x 460mmx203mm bowl size 405mm x 354mmx203mm including 32mm waste coupling, ball and chain 300 mm long with brass cap rubber plug, 32mm dia PVC waste pipe 90 cm long complete all as directed. (Make: Prayag Cat No 1239D or equivelent of Parryware /Hindware/Cera)

S&F in repair sinks without drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe approximate overall size 510mm x 430mmX203mm bowl size 380mm x 430mmx203mm including 32mm waste coupling, 32mm dia PVC waste pipe 90 cm long complete all as directed. (Make: Prayag Cat No 1218 D or equivelent of Parryware /Hindware/Cera)

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag

S&F in repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest S or P trap etc. including 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long and 32mm dia flush pipe, S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge. Make of Pan CERA Cat No S3010108 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag

S&F in repair Vitreous China Wash hand basin with full height pedestal (820mm), ivory/superior colour, flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, pillar taps, brass, with capston heads, fancy type, chromium plated, 32 mm waste coupling brass chromium plated suitable for wash hand basins & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 450 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge. Make of basin CERA Cat No S2040105 or equivelent of Parryware/Hindware/Prayag

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle brackets including 15mm dia 600 mm long, PVC connection pipe with PTMT nut and washer complete all as specified and directed. Make CERA Cat No B1010109 or equivelent of PRAYAG/HINDWARE/Parryware

S&F PVC bathroom mirror cabinet best quality of approximate size 430X330mm fixed to wall using brass screws complete all as directed. Make PRAYAG Cat No 551 or equivalent as approved by GE

S & F in repairs brass, chromium plated centre hole, 15mm bore basin mixer with long bend for mixing hot and cold water, screwed down, screwed for iron pipe and fixed complete all as specified and directed. Make: CERA Cat NO F2008461/PRAYAG-8350 or equvelent of Make Hindware/Parryware/PRAYAG

S & F in repairs brass, chromium plated, 15mm bore wall mixer with L bend for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8380 or equvelent of Make Hindware/Parryware/CERA

S&F in repair 15 mm bore bib taps with flange cast copper alloy chromium plated with capstan head screwed down to iron pipe complete all as specified and directed. Make: CERA Cat NO HT-F3001151 or equvelent of Make Hindware/Parryware/PRAYAG

S&F in repair 15 mm bore bib tap sink cock (wall mounted) not less than 150mm long swivel spout with wall flange cast copper alloy chromium plated with capstan head screwed down to iron pipe complete all as specified and directed. Make: PRAYAG Cat No 8316/CERA Cat NO F2002261 or equvelent of Make Hindware/Parryware/PRAYAG

S&F in repair 2 way 15 mm bore bib taps with double handle quarter turn fancy type with flange cast copper alloy chromium plated with capstan head screwed down to iron pipe complete all as specified and directed. Make: CERA Cat NO QT-F2006211 or equvelent of Make Hindware/Parryware/PRAYAG

S&F in repair 15 mm bore stop valves/angle valve with wall flange cast copper alloy chromium plated screwed down to iron pipe complete all as specified and directed. Make: CERA Cat NO F8040204 or equvelent of Make Hindware/Parryware/PRAYAG

S&F in repair 15 mm bore stop valves/angle valve cast copper alloy chromium plated fancy type with long shank and cup, concealed type, screwed down to iron pipe complete all as specified and directed. Make: CERA Cat NO HT-F3001201 or equvelent of Make Hindware/Parryware/PRAYAG

S & F in repair brass chromium plated tubular towel rail, 20mm dia 'D' type, 600mm long between flanges complete all as specified and directed. (Make: CERA Cat No F5004103/PRAYAG Cat NO BA-20 or equivalent of Parryware /Hindware)

S & F in repair brass chromium plated tubular towel ring, fancy type complete all as specified and directed. (Make: PRAYAG Cat NO BA-81 or equivalent of Parryware /Hindware/Cera)

S & F in repair brass chromium plated shower rose with arms with or without swivel joint, 125mm size including fixing to iron pipes complete all as specified and directed. (Make: CERA Cat No F7020304CH or equivalent of Parryware /Hindware/Prayag)

S & F in repairs health faucet ABS body including wall hook, cast copper alloy with push button & 1 metre long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed. Make CERA Cat No F 8030103 or equvelent of Make : Hindware/Parryware/Prayag

S & F in repairs chromium plated soap dish, 150mm, fixed to wall with chromium plated screws complete all as specified and directed. Make : CERA Cat No F5007106 or equivalent of Hindware/Parryware/Prayag

S & F in repairs chromium plated toilet paper holder fixed to wall with chromium plated screws complete all as specified and directed. Make : CERA Cat No F5001109/PRAYAG Cat No BA-88 or equivalent of Hindware/Parryware

S & F 110 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with solvent cement joints fixed to wall using MS holder bat, etc complete all as specified and directed.

S & F 75 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with solvent cement joints fixed to wall, using MS holder bat etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S&F PVC (SWR) junction single,(single T) 110 mm with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(single T) 75 mm with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, single,(single Y) 110 mm with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, single,(single Y) 75 mm with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl suitable for 110 mm dia pipe.

S & F 75 mm dia outlet , PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair steel chromium plated gratings, circular type, 125mm dia with waste hole fixed with white cement complete all as directed.

S&F 40 mm bore Galvanised iron steel pipe/tubing, medium grade, as in spout complete all as directed.

Sri Vijalakshmi Constructions

docileworx

HRML CONSTRUCTIONS