REPAIR AND POLISHING OF WOODEN FURNITURE AT 58SU CHIMNEY HILLS

Amount

Material and labour for replacing the following unserviceable parts of CHAIR DINING FD-16/228/279 with new parts made out of first class hard wood (Teak Wood) dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax, chalk powder etc., mixed with polish complete all as specified and as directed

Replacing of rear leg of size 55 x 30mm 890mm.

Replacing of front legs size 55x30mmx460mm.

Replacing of side rails of seat frame size 30x65mmx430mm long.

Material and labour for replacing the following unserviceable parts of CHAIR WRITING FD-250/280 with new parts made out of first class hard wood (Teak Wood) dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax, chalk powder etc., mixed with polish complete all as specified and as directed

Replacing of rear legs of size 30x55mm, 890mm long.

Replacing of front legs of size 30x55mm, 460mm long.

Replacing of side rails/back rails of seat frame of size 30x65mm, 470mm long.

Replacing of front rails of seat frame of size 30x65mm, 535mm long.

Material and labour for replacing the following unserviceable parts of CHAIR EASY FD-17/229 with new parts made out of first class hard wood (Teak Wood) dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax, chalk powder etc., mixed with polish complete all as specified and as directed

Replacing of rear legs of size 55x25x300mm long.

Replacing of front legs of size 55x25x300mm long

Replacing of side rails of seat frame of size 70x40mmX300mm long.

Replacing of had rest of size 65 x25mmx610mm long

Material and labour for replacing the following unserviceable parts of TABLE DINING FOR 6 PERS FD-273 with new parts made out of first class hard wood (Teak Wood) dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax, chalk powder etc., mixed with polish complete all as specified and as directed

Replacing of side rails of frame of size 100x25x900mm

Replacing of front/back rails of frame 100x25x1500mm

Replacing of legs of size 40x75mmx760mm

Replacing of stiffener 100x25mmx1500mm long.

Replacing of top made out of 18mm thick particle board exterior grade with phenol formal dehyde BWP with 1.5mm thick decorative laminated sheet with teak shade fixed in one side and the other side of partical board (bottom) shall be white painted and all as directed by engineer in charge.

Material and labour for replacing the following unserviceable parts of TABLE DINING FOR 8 PERS FD-273 with new parts made out of first class hard wood (Teak Wood) dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax, chalk powder etc., mixed with polish complete all as specified and as directed

Replacing of rear legs of size 55x25x300mm long.

Replacing of front/back rails of frame 100x25x1800mm

Replacing of legs of size 40x75mmx760mm

Replacing of stiffener 100x25mmx1800mm long.

Replacing of top made out of 18mm thick particle board exterior grade with phenol formal dehyde BWP with 1.5mm thick decorative laminated sheet with teak shade fixed in one side and the other side of partical board (bottom) shall be white painted and all as directed by engineer in charge.

Material and labour for replacing the following unserviceable parts of TABLE DRESSING LADIESS FD-32 with new parts made out of first class hard wood (Teak Wood) dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax, chalk powder etc., mixed with polish complete all as specified and as directed

(a) S & F in repairs table top of Table dressing ladies with 18 mm thick pre-laminated particle Board of approved make, all as specified on drawing or as directed by Engineer-in-charge.

(b) S&F in repairs new Glass shuttrs of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.(Each glass shutter shall be measured as single unit)

(c) Removing the existing unserviceable Aluminium channel of glass shutter and S & F in repairs Aluminium Channel all as specified on drawing or as directed by Engineer-in-charge.

(d) S & F in repairs new back suport made out of 6 mm thick plywood for mirror of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.

(e) S & F in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.

BED WITH PLYWOOD FD -246 Removing/replacing existing unserviceable plywood from bed and supply & fix new plywood of 12mm thick BWR grade as shown on drawing and fixed by means of screw/adhesive etc completed all as directed.

REPAIR TO GI CHARPOYS FD -220 Removing existing damaged/unserviceable plywood 12mm thick from GI Charpoy and supply and fix new 12mm thick plywood BWR grade of size 2100mm x 900mm fixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 08 Nos per charpoy) duly drilling hole in ply wood and steel frame of charpoy (02 Nos each to long rails and 02 Nos each to short rails), (Make of plywood : Archid/Green ply/Kitply (with QR code) (IS-303)

REPAIR TO GI CHARPOYS FD -220 Removing existing broken/damaged MS flat iron and supply and fix MS flat iron 50mm x 6mm thick, 895mm long drilled/welded to long rail both side in equal distance and painting two coats of synthetic enamel paint black colour over a coat of red oxide to the stiffners, all as specified and directed by GE/Engr-in-Charge.

PEG TABLE (FD-236/277) Removing and Replacing of top for Table PEG FD-236/277 made out of 18mm thick particle board exterior grade and supply & fix new particle board with phenol formal dehyde BWP with 1.5mm thick decorative laminated sheet with teak shade fixed in one side and the other side of particle board (bottom) shall be white painted.

PEG TABLE (FD-236/277) Replacing of legs

SOFA SET 4/5 SEATER FD-281/373 Removing the existing unserviceable cloth tapestry from sofa set 4/5 seater Cushions(FD-281/373) and supply and fix new cloth tapestry of approved quality and stitching to the required shape with one side chain and design of foam rubber cushion and fixing to the sofa all as directed by Engineer in Charge. The tapestry cloth got approved by AGE (I) AF.

SOFA SET 4/5 SEATER FD-281/373 Removing the existing unserviceable foam rubber of size 100mmx525mmx550mm from sofaset 4/5 seater (FD-373/281) and provide 32/40 density of foam rubber cushion of sizes 100mmx525mmx550mm foam rubber and prefixed to the sofa as directed by Engineer in Charge. The item got approved by AGE (I) AF Chimney hills

CANNING OF REPAIRED FURNITURE : Re - Caning of furniture such as chair of seats/backs with 1.8x0.46 mm plastic cane of approved quality with bordering of 3 x 0.6 mm width plastic cane all alongwith the frame (as ordered).

Material and labour for cleaning the surfaces and removing stains using sand paper, filling cavities, cracks with approved filler material like bees wax, raw-zina, chalk powder etc., mixed with polish, applying high gloss french polish, till the final glossy finish and uniform texture is achieved (undersides/hidden portion directly not visible shall be excluded) for the following items of furniture complete all as specified and as directed.

Bed with plywood top FD-246

Chair Easy cushioned

Chair witing FD-250/280

Chair Dining FD-16/228/279

Chair Easy FD 17/229

Chair WBB FD-225

Cap stand with Mirror SPL

Peg table FD-236/277

Sofa set 5 seater FD-373

Sofa set 4 seater FD-281

Stool Dressing FD-232

Table 5’x2’-10” F-1

Teapoy FD-232

Form with back FD-78.

Table center FD-274.

Table bedside FD-276.

Table centre 2 tire SPL.

Table conference ‘U’ Shape SPL.

Table dressing with mirror gents FD-37

Table dining 6 Pers FD -239/273.

Table dining for 8 pers FD-239/273.

Table writing Med DB-3982.

Table Writing FD-275.

Side board FD-241/372.

Table dressing with mirror ladies FD-373.

Chair dining with long back FD-357

Global Furnisherts (BID ID -3328029)

chowdeshwariconstructionco (BID ID -3342628)