Loading…
Loading…
Updated dates
Tender Value
₹14.4 L
EMD Value
₹28,856
Closing Date
27 Jun 2026, 6:00 pm
GE (NW) NOFRA
Dr Homi Bhabha Road Navy Nagar Colaba Mumbai
SPECIAL REPAIRS TO OFFICERS WAITING AREA AT BUILDING NO P-44 AT INS SHIKRA
2026_MES_766572_1
8546/E8 GE (NW) NOFRA
Open Tender
Civil Works
365 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (NW) NOFRA
₹28,856
Yes
20 May 2026
20 May 2026
29 Jun 2026
20 May 2026
27 Jun 2026
22 Jun 2026
20 May 2026 - 27 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified. | 7 | X Sqm | - | - |
| 2 | M&L for 18-20 mm thick (Jet Black) Granite slab (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over including bedding layer of 20mm thick in cement mortar (1:4) for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | 70 | Sqm | - | - |
| 3 | M&L for providing edge moulding to 18-20mm thick Granite slab as in counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed by Engineer-in-charge. | 22 | RM | - | - |
| 4 | Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed. | 445 | Sqm | - | - |
| 5 | M&L for light shade coloured double charged Cat No Super Glossy-K6207, K6306, K6211 of Kajaria or Equivalent as approved vitrified tiles 8-9 mm thick (square/rectangular) polished area of each tiles exceeding 0.42sqm but not exceeding 1.00 Sqm as in dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 15 mm thick backing coat in CM 1:4, complete all as specified and directed. | 370 | Sqm | - | - |
| 6 | M&L for light shade coloured double charged Cat No Super Glossy-K6207, K6306, K6211 of Kajaria or Equivalent in as approved vitrified tiles 8-9 mm thick (square/rectangular) polished area of each tiles exceeding 0.42sqm but not exceeding 1.00Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed. | 75 | Sqm | - | - |
| 7 | S & F in repairs Toughned glass (Plain/frosted) of 12mm thickness as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and fixing to the frame including embossing naval emblem complete all specified and directed by Engineer-in-Charge. | 20 | Sqm | - | - |
| 8 | Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc. | 70 | SQM | - | - |
| 9 | M&L for rendering 15mm thick in two layers (1st layer 10mm and 2nd layer 5mm)CM 1:6 in two layers on fair face of brick work or concrete surfaces of walls and finished surfaces even and smooth without using extra cement. | 70 | SQM | - | - |
| 10 | (a) Material and labour for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 2 mm over the old plastered surface of wall/Ceiling after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labourer as per following steps :-
Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute.
Step 2 :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.
Step 3 :- Allow 6-8 hrs time to dry the putty surface.
Make : Asian paints / Nerolac paints / Shalimar Paints
(b) Material and labour for applying two coats of oil bound distemper over a coat of primer using fully automatic Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed by Engineer-in-Charge. | 2,450 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
BOQ_858511.xls
BOQ • 1.53 MB
tenderpages8546.pdf
Tender Documents • 1.13 MB
Download all tender documents and submit your bid