Construction of Knowledge and study center S.F.No.499-1A near Abirami Hospital private Ltd at Machegoundenpalayam H/o Seerapalayam - Package No TN02-158 in Madukkarai Block of Coimbatore District under SPMRM-Phase I 2016-2017 to 2018-19 Scheme.

Amount

Construction of Knowledge & study center S.F.No.499/1A near Abirami Hospital (P) Ltd at Machegoundenpalayam H/o Seerapalayam

Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, Laterite rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.

Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (Measurement should be taken as per plinth area and indemnity bond for warranty for 10 years to be furnished)

Supplying and filling the Foundation & Plinth with M.Sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

Supplying and filling in foundations with approved Good Earth/Gravel and the area wherever required below ground level and sides of the foundation and walls with the material given below in layers not exceeding 150 mm thick, including well watered and consolidation, levelling, loading, unloading and transportation etc. complete, and as directed.

Providing and lying plain cement concrete of (1:2:4) in foundation and floors using 12 mm. Size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.

Providing and laying at all levels RCC of grade M25 using PPC & 20 mm gauge & down machine crushed stone aggregates, machine mixed, mechanically vibrated and properly cured, all material and labour complete in all respects.

Below Ground Level

Ground Floor

First Floor

Second Floor

Supplying, fabricating, erecting and fixing in position with bolts and nuts, nails and ties, etc. centering and shuttering to correct line and levels including strutting, propping, etc. with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leakproof to avoid leakage of mortar, dismantling and removing the aforesaid assembly after the concrete attains the required strength, all material and labour complete in all respects.

Shuttering Raft

Shuttering Column

Shuttering Tie/Plinth Beams

Shuttering Roof Beams/Slab/Staircase/Lintels

Providing and decoiling wherever necessary, cutting, bending, placing and fixing in position Grade Fe 500 D(conforming to IS1786-2008, manufactured by TMT process or equivalent) of all diameter for reinforcement in all cast-in-situ reinforced concrete works at all levels and height and tying with 18 gauge annealed GI binding wire, providing and fixing cement cover blocks, all material and labour complete in all respects. (Only laid weight shall be measured including authorised laps. Cuts and wastages shall not be measured for payment. Rate shall include rolling margin of 3% for reinforcement )

Brick work with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Ground Floor

Half Brick work in superstructure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Ground Floor

Providing and Laying of Porotherm Block Masonry for walls jointing with approved make adhesive paste as per standared procedure drawing, design and specification, including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Supply and Laying of Interlock Block masonry for walls as per standared procedure drawing, design and specification, including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Providing and painting internal surface two coats with plastic emulsion paint over a coat of water based primer of approved quality and approved shade in all floors at all height by making the surface of wall smooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Plastering in cm 1:3 12mm thick including all charges etc. complete.

Providing & Fixing UPVC window/ventilators. Providing and fixing double glazed unit(DGU) hermetically sealed glazing in UPVC windows, ventilators and partition etc. with 6 mm thick clear toughened glass inside , having 12 mm air gap, including providing perforated aluminium spacer , desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and fixing ISI marked MDF door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces ofshutters: including ISI marked Stainless Steel butt hinges with necessary screws. All flush door will have decorative high pressure laminated sheet on both side (1.50 mm thick) of plain /wood graining loss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding Quality confirming to IS:2046 Type S, including cost of adhesive of approved quality. All flush door will be providedwith lipping with 2nd class teak wood battens 25mm minimum depth on all edges of flush doorshutters. Pasting of lamination should be done in factory using automatic machine under pressure and should be free from any nails, per forationsorair bubble set complete including cutting necessary rebate in shutter sand for vision panel (If required) . Vision glass (wherever applicable as per Door schedule): Doors shall be with vision glass as a part of complete doorassembly. Theglass should be 6 mm clear toughened glassflush fixed with sealant on the surface of the door. The lipping shall be provided around vision panel. The glass must be 120 min fire rated.

Supply and Installation of Puff Panel 50mm tk for Roofing, screwed into required position as per standared, drawing, and desgin, Including cost of conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. W-0373 as per SOR 25-26

Providing and fixing false ceiling (12.5 mm thick tapered edge gypsum moisture resistant board)at all height, complete with cost, coveyance, loading and unloading, and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. W-0619 using CS board

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing MS railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & MS steel dash fasteners , steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. W-0652 S.S. Handrail

Providing and mixing Integral crystalline ad mixture for water proofing treatment @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer‟ sspecification in reinforced cement concrete to be mixed in terrace slab. W-0302 SOR 25-26

Providing and mixing Integral crystalline ad mixture for water proofing treatment as recommended by the manufacturer for toilet sunken portion. W-0301

Finishing with top of roof with one course of machine pressed tiles of size 20cm x 20cm x 20cm of approved quality laid in cement mortar l :3 (One cement and three M.sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement mortar ,red oxide, including cost and conveyance of all materials and labour charges and other incidental charges etc., complete as per standard specification

Providing and laying cement based waterproofing treatment of 'India Waterproofing' or equivalent manufacture for terraces, sunken floor, RCC gutters, etc. with well burnt brick bats laid to slope and grouted with cement mortar mixed with proprietary products and with wearing IPS layer on top, all laid as per manufacturer's specifications (Average thickness 115mm) W-0302

Providing and Laying vitrified tile flooring of premium grade 10mm thick conforming to IS 13756 of 800mmx800mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.

Providing and fixing ceramic wall tiles conforming to IS:15622(thickness to be specified by the manufacturer), of approved make, in all colors, shades except burgundy,bottle green,blackof any size as approved by Engineer-in-Charge, in wall tiles (As per schedule of finishesat various location and as per approved architectural drawings)over 12 mm thick bed of cement mortar 1:3(1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade OR laid with cement based high polymer modified quick set tile adhesive(water based)conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (as per site condition and approval of engineer-in-charge)complete in accordance with specifications and other Relevant specifications & IS codes.

Kota stone slab 25 mm thick flooring over 20 mm (average)thick base laid over and jointed with grey cement slurry mixedwith pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand) & as executed in accordance with CPWD specifications and other relevant specifications & IS codes. polished stone 2x2

Providing and fixing in position PVC rain water pipes 2.5 Kg/ Sq.cm. rating of approved make with shoes, bends couplers, tees and other specials as required including making hole in RCC / brick work and grouting the same, jointing pipe with suitable synthetic resin adhesive as per manufacturer’s specification, GI clamps, etc. complete.

a) 110mm dia pipe

Providing and fixing in position GI Rainwater Gutter of approved make with specials as required including jointing with down pipe with suitable synthetic resin adhesive as per manufacturer’s specification, GI clamps, etc. complete.

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction & maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (for Construction & maintenance) above this row in column "BB" for all works in this package}

shanmathi constructions private limited (BID ID -1522600)