Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC 503 GIRIRAJ HEIGHT VAITY WADI L B S MARG NEAR HARINIWAS CIRCLE THANE 400 602 | THANE | MAHARASHTRA | 400602 | L1 | Accepted-AOC AOC | |
| 2 | L2₹45.5 L+₹2.5 L (5.93%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹47.0 L+₹4.1 L (9.59%)Rejected-Finance 601 A WING SAI PARAMOUNT APARTMENT SHRADDHA VIHAR COLONY INDIRANAGAR NASHIK NASHIK MAHARASHTRA 422009 | NASHIK | MAHARASHTRA | 422009 | L3 | Rejected-Finance GREATER THAN L1 | |
| 4 | L4₹47.8 L+₹4.9 L (11.4%)Rejected-Finance BHAIRAVNATH NAGAR AT KUSGAON POST LONAVLA 410 401 DISTT PUNE | PUNE | MAHARASHTRA | 410401 | L4 | Rejected-Finance GREATER THAN L1 | |
| 5 | L5₹48.0 L+₹5.1 L (11.8%)Rejected-Finance SHOP NO 04 AKBAR ARCADE NEAR INDRAYANI BRIDGE LONAVLA PUNE 410401 | PUNE | MAHARASHTRA | 410401 | L5 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹45.1 L
EMD Value
₹91,000
Closing Date
2 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Gaurav Tiwari, IDSE, EE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
SPL REPAIRS TO ROOF OF SHIP REFERENCE LIBRARY (P-429) AND MT POOL (BLDG NO P-149) AT INS SHIVAJI LONAVLA
2024_MES_646285_1
GE/LONAVLA/8227/E8
Open Tender
Civil Works
Item Rate
270 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹91,000
Yes
18 May 2024
13 Mar 2024
4 Apr 2024
13 Mar 2024
2 Apr 2024
27 Mar 2024
13 Mar 2024 - 26 Mar 2024
Amount
Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m but n.exc. 2000m etc complete all as specified and directed by Engr-in-charge.
M/L for rendering 10mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment
M/L for PCC 1: 2 : 4 type B-1 (using 20mm graded agg) for PCC padding on RCC roof surface finished even and smoother using extra cement all as specified and directed by Engr-in-Charge.
M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- a) Apply one coat of bitumous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 4mm thick with non woven polyster reinforcement weighing not less than 4.00 Kg/ Sqm applied by torch application method. (d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/sqm of the surface area. (e) Laying APP polymer modified membrane 4mm thick with non woven polyster reinforcement weighing not less than 4.00 Kg/ Sqm applied by torch application method. (f) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/sqm of the surface area. (g) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm.
Disconnecting existing tanks of any capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after carrying out Roof treatment with all accessories all as specified and directed
Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified.
Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in floors/ walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:4
M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 8mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4
Taking down steel door of any type any size with all fittings complete
S&F 12 mm thick toughened glass doors of any size and design with suitable stailess steel patch fittings,locking arrangements ,floor springs and 02 nos 300 mm long matt finish handles including necessary acid wash /itching/unit logo and letterings complete all as specified and as directed by engr in charge.
S&F 12mm thick toughened glass of any shape and size (Plain or frosted) as in panels fixed with patch fittings, stainless steel beads,fixed to walls and ceiling ,gap filled with silicon gel etc complete all as specified and as directed.
Cutting holes into stone walls/block masonary built in cement mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2;4 type B-1, the opening should exc 150sqcm but n.exc 400 sqcm.
M&L for Rolled sections as in main and cross beams, hip and jack rafters;Brackets, purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates quality conforming to Fe 410-W (Gde E250) quality-A
S&F MS plate 5 mm thick (Plain or chequred) ,channels, and counter sank forming holes, with out any attachment FE-410-W (Code E - 250) Quality - B
Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any design/colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
S&F mild steel screw bolts 16 to 20mm dia (machine made) with heaxognal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n.exc 30cm long complete all as specified and as directed.
Material and labour for complete removal of existing treatment on wall surfaces and preparing surfaces and applying two coats of oil bound distemper over a coat of alkali resistance primer over & including 3mm thick Birla white wall care putty on walls complete all as specified and as directed.
Material and labour for Preparation of existing treatment, preparing surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.
Material and labour for complete removal of existing treatment, preparing surfaces and applying two coats of anti-fungal exterior emulsion paint over a coat of primer on walls complete all as specified and as directed.
Chipping, removing, carefully loose plasetr, concrete work by low impact Hasmmer / breaker without damaging the structure & cleaning and disposal of malba out side the premises etc complere as directed by Engr-In-Charge. Hard concrete should not be removed by force.
Cleaning exposed reinforced bars throughly to remove corrosion scale using buffle wheel and emery cloth with water jet and allying two coats of nitozinc primer (Make : Fosroc or equivalent)
Supply and application of Nitozinc primer ( Manufactured by M/s fosroc chemicals India ltd) over the exposed steel from the exposed reinforcement after removing rods scales from the exposed reinforcement rods including micro concreating 1:1.5:3 ,the cost of all materials rent of tools scaffolding cost of paint complete all as specified and directed by the Engr In Charge
Material and labour for providing 50x50x4mm welded mesh coated with anti corrosive chemical to exposed bars using binding wire complete all as specified and as directed by Engr-in-charge.
Material and labour for providing structural grade epoxy-latex bond coat prior to application of any type of mortar confirming to ASTM-C- 882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application complete all as specified and as directed by Engr-in-charge. Make:Pidilite/Fosroc/Shalimar
Material and labour for building up the profile of structural members by using latex B2 modified air cured mortar system in damaged areas (1 Cement-3 part graded cleaned pre-packed river sand 10% latex mortar by weight of cement-0.5 w/c ratio) in 20 mm thickness including levelling profiling etc complete all as specified and as directed by Engr-in-charge. Make- Pidilite/Fosroc/Shalimar.
Preparing Old wooden surface and applying One coat of synthetic enamel paint.
Cutting holes into stone walls/block masonary built in cement mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2;4 type B-1, the opening should exc 150sqcm but n.exc 400 sqcm.
Preparing new or previously untreated steel surface of any description, over 10 cm in width or girth not other wise described and appying two coats of red oxide primer.
M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets/Aluminium snap grid
M&L for powder coated aluminium snap grid frame work for false ceiling, with aluminium angle 25mmx25mmx1.5mm fixed to perimeter of wall, Main 'T' runner 38mmx25mmx1.5mm and secondary/cross 'T' runner 25mmx25mmx1.5mm to be interlocked in such a way that the size of grid shall be 605mmx 605mm including 6mm dia GI hangers (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40x3mm, 60mm long and expansion hold fastners 12.5mm dia, 40mm long, icluding romoving and refixing of existing fittings and fixtures complete all as specified and as directed. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE.
S&F 4 mm thick Non Asbestos (E-board) designer tiles (Electra) suitably fixed in false ceiling grid /frame with staples or screws complete all as specified and as directed.
Demolition of unreinforced cement concrete of any description and in any position complete all as specified and as directed.
Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less
Forming 12 mm thick ex?pansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’
Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius in CM 1:4
M & L for rendering 15 mm thick cement plaster (1:4) on fair faces of brick or concrete surfaces.
M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty
Supply and fixing aluminium three track sliding windows FRAME top & sides (section No.4310) of size 91.80x31.75x1.2mm weighing 0.826kg/m, frame bottom (section No.4309) of size 91.80x31.75x1.2mm weighing 1.015kg/m, SHUTTER vertical member (section No.8979) of size 40X18X1.2 weighing 0.379kg/m, shutter inter lock vertical frame (section No.8980) of size 40X18X1.2 weighing 0.488kg/m, shutter top & bottom horizontal frame (section No.8853) of size 40X18X1.2 weighing 0.428kg/m, with powder coating of thickness 50-60 micron with one or more rebates, including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws aluminium fitting handles, locking arrangement etc including 4.00 mm thick sheet glass for glazed shutters and stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm for wire guage shutter all as specified and as directed. Note: (i) The window opening shall be provided with 3 shutters of equal width. (ii) Two shutters shall be glazed shutters and one shutter shall be with stainless steel wire. (iii) Sheet glass & figured glass shall be included in quoted rate.
M&L for machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete
Dismantling structural steel work including doors, gates but excluding framed truss etc.
Framed work as in doors or gates, grills of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete
M&L for RCC M30 (RMC) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Use and waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping
S&F for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6
M&L for 15mm thick plastering over the floor and side walls of water tank in CM 1:3 mixed with water proofing compound of approved quality @ 1kg per bag of cement including rounding of all corners wherever required, smooth, rendering, curing etc complete also providing 40mm Dia GI spout pipe of 50cm long in external wall and as per instructions of ENgineer-in-Charge.
S & F in repairs Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal including waste pipe connections and pillar tap complete all as specified
S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets
S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, fancy type chromium plated ,screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe
S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe.
S&F Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs
S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.
Taking up or down steel tubing of bore 15/20 mm and connection, including cleaning for refixing or removal complete all as specified.
Taking up or down steel tubing 25/32 mm and connection, including cleaning for refixing or removal to store complete all as specified.
Taking up or down steel tubing 40/50 mm and connection, including cleaning for refixing or removal to store complete all as specified.
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
S&F CPVC pipes, SDR 11, 32 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.
M&L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old wall surfaces including preparation of old wall surfaces
M&L for powder coated aluminium two track, two shutters (of equal width), sliding type windows without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings (two No's for each sliding shutters) & 4.00mm thick plain glass for glazing with & including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20956 (ii) Frame (Top & Side)-20966 (iii) Shutter vertical (Handle lock)-20846.(iv) Shutter vertical (Int lock)-20845.(v) Shutter (Top)-20844.(vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with two shutters of equal width. (ii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window. (iii) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (iv) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.
Dismantling of CGI/PGI/Galvalume sheet roofing any gauge and any thickness including ridge, valley gutter etc.
S&F steel work as in vertical post connecting to plates, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete
S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ rain gutters, fixed with nessesary angle iron and self tapping screws as specified.
M&L for Preparing old painted surfaces/ untreated surfaces of steel any description, over 10cm in width or grith, not otherwise described and applying one coats of Synthetic enamel paint complete all as specified and directed.,
S&F factory made PVC double door frame of size 50 mm x 95 mm made out of 5 mm single side prelaminted PVC sheet reinforced with MS Square tube all as specified and as directed .
S&F for 30 mm Factory made Moulded door shutter - Wood free consisting of frame made out of M.S. tube of 19 gauge thickness and size of 25 mm X 25 mm for stiles, top and bottom rails M.S. frame shall have a coat of steel primer. The inner panel shall consist of 25 mm thick High density EPSconforming to IS 4671-1984 bondedwith 2 mm termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side of the EPS. The edge of the panel is to be sealed with lipping of 10mm wide PVC sheet baton (made by sticking 2 nos , PVC sheets of 5 mmt thickness using PVC solvent cement ) and stile sides 25 mm (5mm x 5)thick and 30mm wide PVC sheet fitted along M.S tube for lock provision & for lock height 5 mm thick PVC sheet of 150 mm x 100 mm fixed with upper & lower face of inner side of EPS panel and manufacturer's specification & drawing etc, complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed
S&F Aluminium bow handles, cast type, anodised 150 mm long
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
Removing building materilas such as bricks, stones, concrete, sand etc to a distance upto 15Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination.
Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed. (a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on independent board
(c) One 3 pin 5 Amp switch socket outlet on same board with accessories
All as per item No.2 here in before but wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed. (Note : cutting chases & making good of disturbed surfaces shall be measured and paid separately).
S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed. Make: Anchor / Bajaj / Cona Note : Taking down of swithches included in taking down point wiring
S&F socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type complete all as specified and as directed. Make : Anchor / Bajaj / Cona
S&F Switch socket combination 2 in 1, 3/5 pin, 5 Amp flush type universal complete all as specified and as directed. Make : Anchor / Bajaj / Cona
S&F Switch socket combination 2 in 1, 3/5 pin, 5 and 15 Amp flush type universal complete all as specified and as directed. Make : Anchor / Bajaj / Cona
Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body complete all as specified and as directed.
Labour only for taking down and fixing repairs to Ceiling Fan with Fan regulator, Exhaust Fan, any Make & any Sweep Oiling, Greasing , removing all dust with painting and Rewinding of fan by super ennameled copper insulated wire as per existing gauge, varnishing, heating assembling and testing for serviceable condition complete all as directed by Engineer-in-Charge.
S&F Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed by Engineer-in-Charge.
Supply and fixing LED Tube Rod 1x18W, 220 V, AC decorative type with driver, holder including LED TUBE LIGHT connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Bajaj (BLRB - DB 118) or equivlent PhilipsHavells.
Supply and fixing LED Tube Batten1x18W, 220 V, AC decorative type with driver, holder including LED TUBE LIGHT connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Bajaj (BLRB -118,18 W LED) or equivlent PhilipsHavells.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Crompton or equivlent Bajaj/Philips/Havells
S &F Suspension (pendent) lumiaires with efficient diffuser, ensuring perfectly uniform illumination,optimised and unparalleled light distribution .Inter-connectable luminaires for aesthetically appealing downlight application nd directed by Engr-in-charge. Make: Bajaj (BPCS 40 W LED 4F WH) OR equivalent crompton/philips/havells. Note : In additional suspension (pendent) if required as per site than provide by contractor.
S & F Skylux Series -surface (4x1) mounted LED designed high efficiency ,glarer free soft illumination, white powder coated CRCA housing , seamless front frame with flat white high transmission acryliuc cover including complete all as specified and diercted by Eng-in-charge.Make: Bajaj (BZSSLL 36W LED WH i) or equivalent Crompton/Philips/Shakti.(Note: This item warranty periods 2 year by same company items.2) In additional suspention (pendent) if required as per site than provide by contractor.
S & F Skylux GZi WH Series -surface mounted LED designed high efficiency ,less THD value for operation & electrical eifficiency, LED Surface 2 x 2 luminaires 36 W LED WH i, including complete all as specified and diercted by Eng-in-charge.Make: Bajaj (BZSSQL 36W LED WH i) or equivalent Crompton/Philips/Shakti.(Note: This item warranty periods 2 year by same company items, In additional suspention (pendent) if required as per site than provide by contractor.
Supply and fixing LED street light fitting/Building light 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Crompton or equivlent Bajaj/Philips/Havells
S & F of UP and DOWN LED light 15 W IP- 66 LED Make: havells (CLIOWLS15WLED830PSYMTOTG) HSN code 9405 0r equivalent to Shakti/Philips/Wipro complete all as specified and directed.
S & F LED Bollard with opal acrylic diffuser and IP 65 protection all as specified and directed. Make:Bajaj (BGBOS 600 9 W LED WW) OR equivalent Philips/havells.
Taking down of Old MCB DB control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site.
S&F in replacement Triple pole and neutral (8 Way) Double door, (VTPN) suitable for and including MCCB 4 pole, 160 amps, 16 KA as incoming (compact) Earth and neutral bus bar of capacity upto 200 amp 8 ways,IP 43 protection , shrouded neutral bar & pan assembly with flexible connecting link in the wall with suitable nut and bolt including matching the existing surface all as specified and directed , Make Havells (DHDLVDOBGSFE08)HSN CODE 8537 or equivalent indoasian/Standered.
S&F in repairs MCB SPN 40 to 100 AMP, 415 Volts 10KA ''C'' curveMCB with poles and current carrying capacity in the DB complete with connection testing & commissioning.
S&F in replacemen MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed
S&F in repairs MCB SPN 40 to 63 AMP, 240 Volts 10KA ''C'' curve , as per site requirment,Complete all as specified and directed.
S&F in repairs MCB SP 5 To 32 AMP, single pole 240 Volts 10KA ''C''&''B'' curve , as per site requirment,Complete all as specified and directed.
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20DP all as specified and directed
Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to disturb surface of wall and match with the existing surface.
M&L for sub main wiring drawing through PVC casing and capping with wiring alongwith earth wire size 2 x 1.5 sqmm + 1x 1.5 sqmm earth wire of FRLS is PVC insulated copper conductor ,single core cable in surface/recessed as required. Note:- Two run of 1.5 sqmm wire and One run 1.5 sqmm wire and One of PVC casing caping/PVC conduit will be measured as one running meter.
M&L for sub main wiring drawing through PVC casing and capping with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed. Note:- Two run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter.
M&L for sub main wiring drawing through PVC casing and capping with two single core 6 sq mm and one run of 6 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed. Note:- Two run of 6 sqmm wire and One run of PVC casing caping will be measured as one running meter.
M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion.
Supply lay and testing cable XLPE insulated screened beded,galvanized steel trip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 70 sq mm 3.5 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as diercted.Note : Cable are laying in undergruond or on wall by saddle as per site requirment.
Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in Soft / loose Soil complete as specified & directed
Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/soil complete all as specified and directed
Removing excavated material n. exc. 50 M away and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and as directed.
M&L Sand cushioning for UG cable protection/ducts, consolidated sand compacted with clean dry sand all as directed and specified.
Supplying and laying factory cast un-reinforced precast concrete cable cover, embossed the mark " LT CABLE" class LV, type 1 with peak, size 250mm x 150mm x 40m laid in trenches as specified and as directed .
Cutting bituminus road as per direction of Engr in Charge for laying of UG cable and match the existing road to the existing system.
Supply and lay in trenches/ along the wall / floor pipes GI light grade of size 50 mm dia with and including all fittings and accessories including taking down old U/S pipe complete all as specified and directed for cable protection.
S & F PVC insulated and FRLS PVC round sheathed copper conductor of size 2.5 sqmm 3 core(flexible) industrial cable, 110 volt conforming tp IS 694.Make: Polycab, Havells.
Shree Ayyappa Engineering
SAI SAMARTH ENTERPRISES
seema enterprises
KGN builders
RK AND SONS CREATION
VIJAYA ENTERPRISES
JADHAV CONSTRUCTION AND INFRASTRUCTURE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .