New Construction work at Government Polytechnic, Jayanagar(Koderma) for Developing it as a State of the Art Institution

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.

Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)

Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 75B brick work in CM (1:6) in Foundation with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening, racking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75A brick work in CM (1:6) in superstructure with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening, racking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 125mm thick reinforced designation 75A brickwork in C.M. (1:4) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as sper building specification and direction of E/I.

Extra brick work for each consecutive floor above first floor including watering and scaffolding all compleat as per direction of E/I

Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 112mm thick reinforced designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carraige of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforced) all complete as per building specification direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Extra for providing and mixing water proofing material in cement concrete work in does by weight of cement as per manufacturers specification

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ)

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases

Centering and shuttering including strutting, propping etc. and removal of form for : Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards

Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like

Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 50 mm thick

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.

Supplying, fitting and fixing 32mm , thick good quality well dressed and well seasoned Teak wood 1/3rd glazed and 2/3 paneled shutter in doors and window with 20mm thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding doors boltes tower bolts handles or rings, hooks and eyes, cleats, sand blocks as per schedule and 3mm thick plain glass panes fitted with teak wood beads and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing Tor steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for TATA (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL))

8mm dia (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

10mm dia (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

12mm dia (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

16mm dia (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

20/25mm dia (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

Supplying, fitting & fixing M.S. Grill made of 20x6mm flat as per approved design and drawing aproperly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.

Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I.

Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.

Providing designation 75A one Brick Flat Soling joints with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I.

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I (Cost of Cico will be paid separately)

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commercial grade colour 15X15cm Tiles.

Extra for flooring work for each consecutive floor above first floor complete as per direction of E/I.

Providing and laying vitrified Paring / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 4457:2007, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 x 10 mm sizes.

Providing and laying Double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less then 0.08% and conforming to IS: 15622/ISO 13006 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement:4 Coarse sand0, jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with wite cement and matching pigments etc, complete Size of tiles 600 x 600 mm.

Providing 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I.

Providing 1.5 mm. cement punning including curing carrage of water withall leads and lifts as per building specification and direction of E/I

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing rough cast plaster in 2 layers ,the bottom layer being 12 mm ,thick in cement mortor 1;3 and top layer finished with gravel,pebbes or crushed stone as per specified cement mortor 1;3 - do-

Extra for plaster work exteriour surface for each consecutive floor above first floor including cost of scaffolding ect all complete as per directiopn of E/I

Making 6x6mm grooves in plaster surface over walls truely horizontal or verical as specified at regular intervals, at all heights including cleaning, finishing scaffoding and curing with all leads and lifts of water all complete as per building specification and direction of E/l.

Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including cleaning the surface after removing dirt,scales grease including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.

Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing 150mm wide brick drain in cement mortar (1:6) with as. 150mm clear depth and 250mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Supplying fitting and fixing C A R W D pipe with necessary strip spikes bend shoes etc. including cost of carriage all complete as per building specification and direction of E/I

Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps :- (a) Surface preparation :-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jel including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc or equivalent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with '150mm X '150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modilied repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.

Covering of treated surface wrth PCC :- Providing 25 mm thick Cement Concrete M20 (1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F M 2.5 io 3 including screening,shuttering, and mixing cement concrete in mixer with admixture of integral water proofing and placing in position, striking curing,taxes and royality all complete as per building specification and direction of E/l. Panels that has been left should be casted next day.- There should be 6 mm gap between Panels. Brand- Sika_Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421 ic , Dr Fixit Pidiproof LW+

Providing and mixing liquid integral water proofing compound in conctrete or plaster as manufacturer specification and as per direction of engineer in charge. Brand. Sika plastocrate plus, MYK proff WP 10, Fosroc-Conplast x 4211C, Dr.Fixit, Pidiproff LW+ or Equivalent

Providing and filling of 6mm thick Groove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade) as per drawings and technical specifications and direction of Engg in Charge (with 18% GST). Brand:-Sika Polysulphide, Fosroc-Thioflex 600 Dr. Fixit Pidiseal PS(42P),MYK Seal PS or Equivalent.

Providing and applying Thermoflex P-111 /Sika Coolcoat or any other Equivalent compound on Roofs of Slab as per following procedure-

Crack filler Paste -non cementious materials - CP706 / Crack Seal Paste Providing and Pasting Superfil CP -706 / Crackseal Paste or equivalent chemical in cracks

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red. Area of slab over 0.50 sqm

Extra for providing edge moulding to 18mm thick marble stone counters,Vanities etc. over Item No. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading

Providing and fixing PVC Door Frame of size 50x4 7 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer?in-charge. Decorative finish (wood grained finish)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete..

Providing and fixing 1mm thick M.S. sheet door with frame of 40 x40 x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angle 40X40X6mm for diagonal braces

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mmdia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur green marble

Extra for pre finished nosing to treads of steps of marble stone.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : '12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Ridges plain (500 - 600mm)

Gutter (600 mm over all girth)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion - Powder coated aluminium (minimum thickness of powdercoating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required inlcluding the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) --- Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge.“For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia, 50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/ tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39 mm flange x 11 mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250 mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20 mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12 mm diameter and 121 mm length conforming to AISI 304 and 316 at 500 mm c/c with minimum embedment of 100 mm in RCC (RCC to be paid separately) and located not more than 300 mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 25 mm thick

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

Providing and fixing Rolling shutter made of 80x1.25 mm machine rolled laths as per specification and direction of E/I.

Providing and fixing Top cover for rolling shutters 1.25 mm thick

Providing and fixing 27.5 cm long wire spring grade No. 2 for rolling shutters as per specification and direction of E/I.

Providing and fixing Ball bearing for rolling shutters as per specification and direction of E/I.

Providing and fixing Precoated galvanised iron profile sheet 0.50 mm TCT as per specification and direction of E/I.

8672 Precoated galvanised steel plain ridges 0.50 mm TCT and 500-600mm wide as per specification and direction of E/I.

Providing and fixing Precoated galvanised steel flashings/aprons 0.50 mm TCT and upto 600mm wide as per specification and direction of E/I.

Providing and fixing Precoated galvanised steel gutter 600mm overall girth as per specification and direction of E/I.

Providing and fixing Punched tape concertina coil 600 mm dia 10 m openable length (Total length 90 m) as per specification and direction of E/I.

Providing and fixing of 12 mm thick marine plywood conforming to IS: 710 as per the direction of Engineer-in-charge.

Providing and fixing of Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire all complete as per the direction of Engineer-in-charge.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm. removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. In area of thorny jungle

Exacavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work. Hard Rock (not requiring blasting) Mechanical Means

Construction of subgraed and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirment of table No -300-2.

Compacting Original ground Sub -grade Loosening of the ground upto a level of 500 mm below the sub-grade level, watered, graded and compacted in layers to meet requirement of table 300-2 for sub -grade construction.

Construction of dry lean cement concrete Sub -base over a prepared sub-grade with coarse and fine aggregate conforming to IS 383 the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum,optimum moisture content to be determined during trial length construction, concrete strength not be less than 10 map at 7 day, mixed ina s batching plant, transported to site laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.

Cement Concrete Pavement Construction of un - reinforced, dowel jointed plain cement concrete pavement over a prepared sub base with -43 grade cement @ 400 kg per cum coarse and fine aggregate not exceeding 25 mm, mixed in a batching and mixingplant as per approved mix design, transported to site, laid with a fixed form or s;ip form paver, spread, compacted and finishes in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler,separation membran, sealant primer, joint sealant, debonding strip, dowel bar tie rod admixtures as approved, curing compound, finishing to lines and grades as per drawing

Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)

Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)

Speading of sludge farm yard manure or/and/ good Earth in requied thickness ( cost of sludge farm yard manure or /and good earth to be paid for separately )

Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed.

Maintenance of lawns or Turfing of slopes (rough grassing) for a period of one year including watering etc.

Turfing lawns with fine grassing including ploughing, dressing including breaking of clods removal of rubbish, dressing and supplying doobs grass roots at 10 cm apart,including supplying and spreading of farm yard manure at rate of 0.6 cum per 100 sqm

Planting and maintaining of Pemanent Hedges

Planting Permanent Hedges including digging of trenches , 60 cm wide and 45 cm deep , refilling the excavated earth mixed with farmyard manure, supplies at the rate 4.65 cm per 100 metres and supplying and planting hedge plants at 30 cm apart

Mintenance of hedge for one year

Planting and Maintaining of Flowering Plants and Shrubs

Planting flowering plants and shrubs in central verge

Maintenance of flowering plants and shrubs in central verge for one year

Planting of trees by road side ( Avenue trees ) in .60 m dia holes, 1 m deep dug in the ground , mixing the soil with decayed farm yard/ sludge manure, planting the saplings backfilling the trench , watering fixing the tree guard and maintaining the plants for one year

Supply at site of work well decayed farm yard manure, from any available source, approved by the engineer in charge including screening and stacking.

Edging with 2nd class bricks, laid dry lengthwise, including excavation, refilling, consolidation, with a hand packing and spreading nearly surplus earth within a lead of 50 metres.

Providing and fixing tree guard 0.60 metre square, 2.00 metre high fabricated with MS angle iron 30 x 30 x 3 mm, MS iron 25 x 3 mm and steel wire3 mm dia welded and fabricated as per design in two halves bolted together

Planting trees as compensatory afforestation at the rate of 290 trees per hectare at a spacing of 6 m by grubbing and leveling the ground upto a depth of 150 mm, digging holes 0.9 m dia, 1 m deep, mixing farm yard/sludge manure with soil, planting of sapling 2 m high with 25 cm dia stem, backfilling the hole and watering.

Providing and laying Granular Meterial or hard murrum for GSB work at Quarry

Carriage of materials from source to site work including loading & unloading all complete job as per specification and direction of E/I

Sand - 10 Km

Stone Chips - 22 Km

Stone Metal - 22 Km

Brick - (1k+7p) 8 Km

Fly Ash Brick - 15 Km

Supplying and fixing male ended 15 mm dia brass bib cock of approved quality (wt. not less than 350 grms) with extra socket all complete as per specification and direction of E/I.

Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I. (A) BRASS STOP COCK 15 mm dia

Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.

Horizontal - 25 mm dia

Horizontal - 32 mm dia

Providing and fixing N.P/C.P. brass/P.V.C. porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/I. 125mm dia C.P. shower

Providing and fixing 15 mm size C.P. brass pillar cock (Weight not less than 350 gms). C.I. body brass spindle pillar cock of approved quality as per specification and direction of E/I. (b) C.I. body brass spindle

Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I.

25 mm and weight not less than 500 gms.

32 mm and weight not less than 700 gms.

Cutting chajja or cornice for laying G.I. pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of Engineer-in-charge.

Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.

125 mm thick wall

250 mm thick wall

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.

Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror 600mm x 450mm size

Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with Mirror (300 x 450mm)

C.P. brass liquid soap container

Supplying materials and labour for fixing 20mm dia M S bar steps in stening wall of 03 m interval and staggared in 1:2:4 cement concrete including scaffoldng and curing etc. all complete as per specification and direction of E/I

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I. "P" trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C..C. brackets 32 mm alkathene/ PVC telescope flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580mm long -( c ) With 10 lit. low level PVC cistern

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I. "P" trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C..C. brackets 32 mm alkathene/ PVC telescope flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580 mm long with 12.5 lit. low level PVC cistern

Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I. 12.5 lt. low level PVC Cistern

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of Hindustan 'Parry' or any other approved I.S.S. make with 5 litres capacity C.i. automatic flusing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm PVC/Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including priming coat of red oxide, cutting wall and floor making good the same etc. all complete as per specification and direction of E/I. Flat back or standard corner (600mm x 350mm)

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I. (for classification of soil items A)

Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight railsr[onninglod, night guard, Red lplrt and barrier etc. all complGas pfipecification and direCGdir of fr

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.

Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I. 150mm dia

Supplying of G.l. Fittings (Conforming to l.S. 1879 ) 15 mm GI niple with coupling 15 mm dia x 100 mm long

Supplying of G.I. Pipes (TATA mark or equivalent) as per IS-1239 (part 01/ 2004 1SI Marked / Medium Quality 65mm dia

Supplying of C I cover with frame for manhole and inspection chamber

Supplying of Solvent Cement

Supplying of 100 mm dia steel Jali

Special type C.P. Bath room Fitting for V.I.P. Buildings- Jaquar,

bib cock long thread

Angular Stopcock /2 way bib cock

Central hole basin mixer best quality

Wall mixer with telephonic shower anangement (lSl Marked)

Wall mixture with provision for over head shower with elbow coupling and flange

Telephone shower wih flexible pipe

Towel Rail 24"

Towel ring

Soap dish

Toilet Paper holder

Glass Shelf 22"

Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.

(a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M upto 150.00 M

Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc . all complete job (Basic rates

Supplying all materials, labours, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job (Basic rates)

Supplying submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP

Providing and fixing on wall face unplasticied Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes.

Providing & fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion

75 mm Coupler

110 mm Coupler

75 mm Single tee without door

110 mm Single tee without door

75 mm bend

110 mm bend

75 mm Shoe

110 mm Shoe

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plgs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board. 610x510 mm bowl depth 200 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. Pipe

Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia sand cast iron drop connection

Making soak pit 2.5 m diameter 3.0 m deep with 45x45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.

Group-A

Group-B

Group-C

Twin Control Point Wiring in PVC Conduit, with Modular type Switch: Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch, modular plate, suitable size of GI box etc as required.

Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.

Power plug wiring in PVC conduit (4 x 4 sq. mm) :-Wiring for light/power plug with 4 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 2 No 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm + 1x1.5 sq.mm earth wire (for Single Separate 5A socket from nearest switch board)

2x2.5 Sqmm + 1x2.5 sqmm earth wire (for switch board circuit).

2x6 Sq.mm + 1x6 Sq.mm earth wire.

4 x 4 sq. mm + 2 x 4 sq. mm earth wire (Lighting DB)

4x6 Sq.mm + 2x6 Sq.mm earth wire. ( to be used as main for Light TPN DB.)

4x10 Sq.mm + 2x10 Sq.mm earth wire. ( to be used as main for Power TPN DB.)

Wiring in existing conduit - Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit including dismantling as required. 4 x 2.5 sq.mm.

Telephone wiring in existing conduit :- Supplying and drawing following pair 0.5 sg.-"l FR PVC insulated copper conductor unarmored telephone cable in the cxieti"g surface / recessed steel / PVC conduit as required

TV cable in Existing Conduit:- Supplying and drawing, co-axial TV cable RG-6 grade copper conductor, PE insulated with PVC sheath in the existing surface/ recessed steel / PVC conduit as required.

S/F PVC Conduit: Supplying and fixing of following sizes of Rigid 2 mm thick PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for TV and TEL out lets.

S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. (to be used in switch board with sockets)

5/6 amps, one way modular switch

5/ 6 amps, two way switch

l5/ 16 amps, one way switch

5/6 amps, 3 pin modular socket

Telephone socket outlet

TV antenna socket outlet

S/F Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Modular blanking plate:- Supplying and fixing of the existing modular plate and switch box excluding modular plate etc, as required.

S/F Modular boxes, base and cover plate:- Supplying and fixing following size /modules G.I. box along with modular base and cover plate for modular switches in recess etc. as required

1 or 2 modules (78mmx78mmx45mm)

6 modules (78mmx140mmx50mm) (to use 2 No. 5/6A sockets & 2 no. 6 A Switch)

8/9 module (78mm x 230mm x 60mm)

l2 module (l35mm x 205mm x 60mm)

Sff Modular base & cover plate :- Supplyng and fxing following size / modulcs, GI box along with modular basc & cover plate for modular switches in recess etc as required.

6 module

8/9 module

12 module

S/F light plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.

S/F power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.

S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.

ITC Exhaust Fan upto 450 mm sweep:- installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.

Providing, fitting, fixing, installing and testing of Switch Fuse Unit of double pole/ TP & N conforming to IS:- 13947-3 of following current rating rewireable porcelain fuse type complete with metal enclosure to be mouned on wall with iron flat 32mmx5mm with G.I. Nut bolts etc. as required and as per the direction of E/I. Make- Havells/HPL/ Standard. 63A TP & N SFU

Providing, fitting, fixing, installing and testing of TPN Bus Bar conforming to IS:- 13947-3 of current rating 100 A TPN with 4 Nos. copper bus having capacity of 100A complete with metal enclosure to be mouned on wall with iron strip 32mmx5mm with G.I. Nut bolts etc. as required and as per the direction of E/I. Make- HPL/Havells/ Standard.

S/F SP MCB DB:- Supplying and fixing following way, SP&N MCB distribution board of sheet steel for 240 Volts on surface /recess complete with tinned copper bus bar, neutral busbar, earth bar, detachable gland plate, interconnections, phophatized and powder coated painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR). 12 Way Double Door

S/I,'T.P. MCB DB :- Supplying and fixing following way, horizontal type three pole and neutral, lsheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bat earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

4 way (4 + 12), Dorrble door, Horizontal type

8 ways (4+24) Double Door. (horizontal type)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel dust protected, duly power painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar mounting MCB's (but without MCB's and Incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) Note : Vertical type MCB TPDB is normally used where three phase outlets are required.

8 way (8 +24) Double door, Vertical Type

S/F 'C' series MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.

6/32A Single Pole

40A DP MCB

40A TPN/TP MCB (To use as incomer for all LDB TPN DB)

50/63A TPN/TP (To use as incommer for all PDB TPN D.B.)

S/F SP MCB blanking plate :- Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

S/I TPN RCCB :. Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

S/F 20 amps SPN MCB industrial socket outlet :- Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps"C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testhg and commissioning etc. as required.

P/F MV Danger Notice Plate:- Providing and fixing M.V. danger notice plate of 200mmX150mm, made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in the single red colour on front side as required.

G.I. Earth electrode with salt/charcoal - Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required

Earthing with G.I. Earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal and salt as required).

Earthing with copper plate 600mmx 600mmx 3mm thick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or cock and salt) complete etc. as required.

Supply and laying 8 SWG coppcr wirc at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc, as required.

Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter below ground as strip earth electrode including connection/termination with G.I. nut, bolt, spring, washer etc, as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc as required.

P/F 25x5mm GI strip in ground: Providing and fixing 25mmX 5mm G.I. Strip at 0.5m below ground as strip earth electrode as required.

P/F G.I. lightning conductor final - Providing and fixing of lightning conductor final, made of 25mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.

Reverting sweating and soldering of copper/ GI tape (with another copper GI tape of the finial or any other metallic object) as required

P/F G.I. lightning conductor tape in horizontal run - Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

P/F G.I. lightning conductor tape in vertical run - Provding and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

P/F Testing joint G.I. lightning conductor - Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos. of G.I. bolts, nuts, check nuts and spring washers etc. complete as required.

P/F G.I. earth tape for lightning conductor :- Providing and laying G.I. tape 32mm x 6mm from earth electrode directly in ground as required.

MV cable laying upto 95 sq.mm. in ground - Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 35 sq.mm. but not exceeding 95 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

MV Cable Laying (120 sq mm): Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 kV grade of i.e 95 sq mm to 185 sq mm size direct in ground including excavation and refilling sand cushioning and protective covering the trench etc as required.

MV cable laying upto 400 sq.mm. in ground - Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 185 sq.mm. but not exceeding 400 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Erection of metalic Pole of following length in cement concrete 1:3:6 ( 1 cement:3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc as required.

S.I.T.C of following rating LED Street lighting luminarie with pressure die cast housing and thoughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50 Hz. Luminarie shall be confirmed to IS: 10322 part-5/section-3 and shall be complete with all necessary accessories as required.

45/48W LED Street light

90/100W LED Street light

SITC of floowing rating reccess/ surface mounted LED Round/ square shape Down light luminarie with pressure die cast housing for singal phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/second-2 or IEC:62722 with all neccssary accessories as required. As per the standard cataloge item.Make:-Jaquare / Havells/ Wipro/Baja.

15/16W LED Round Down light

Recess Mounting LED Square Down light (12W)

Supply, Installation, Testing and Commissioning of following size fan 3 Blades confirming to IS:374:2019 including wiring the down rods of stranded for 230 V 50 Hz, single phase supply etc. complete as required.

1200mm (48") BLDC 5star rating 32W Ceiling Fan

1400mm (56") Ceiling Fan BLDC

Supply of surface/ pendent mounted with chain Batten type LED 4ft Tube light fitting with Housing & cover made up of CRCA sheet steel. Cover is fixed to the housing by means of 2 Nos. bolt with engineering plastic head along with 1 nos LED tube of 20/22W Each of luminous efficacy of efficacy >110 Lm/W. Make:- Jaquare / Havells/ Wipro/Baja.

10/12W LED Tube light

20122W LED Tube light

S.I.T.C. of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal acryclic diffuser on existing pipe including connection with 1.5 sq. mm copper conductor etc all complete as required. 40/ 45W LED Opal approved make LED Post top

S.I.T.C. of following rating approval make LED Bollard fitting with cylindrical shape of height 600 to 850mm power input-8/9 watt with die cast aluminium housing opal with PC diffuser, IP:65/54 protection, confirming to IS:10322 part 5 etc all complete as required. (excluding plinth charge)

Providing and fixing of PVC/XLPE indulated PVC sheathed heavy duty , aluminium armoured cable of grade 1.1KV as per IS 1554 (Part-1), etc. as required. Make:- Havells / Finolex / Polycab/KEI.

3.5 Core 35 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

3.5 core × 50 sq.mm.(aluminium)

HT Cable 3.5Cx120 sqmm

4 core × 6 sq.mm.(aluminium)

7.0m height Octagonal Hot -dip glavinized pole(BOP-7030) :Supply of 7.0m height OctagonalHot -dip glavinized pole with top dia 70mm, bottom dia 130mm & made of 3mm thick sheet, base plate dimension 200x200x12mm(L X B X T) including suitable sizes of foundation bolt all complete as required.( without arm) Make_Bajaj/Havells/Surya/ Philips/Jaquar

Supply and Transportation of AC 230/250 Volts, 50Hz,300mm sweep Exahaust Fans including providing nuts- bolts, mounting frame and other required accessories etc. (For toilets) Make:- Bajaj /Crompton / Havells .

LED Batten (10/12W) :- Supply and fixing of 10/12 W Led bulb in existin Holder Fitting .Make:- Jaquare / Havells/ Wipro/Baja.

15/16W LED type bulb :- Supply and fixing of 15/16 W Led bulb in existin Holder Fitting .Make:- Jaquare / Havells/ Wipro/Baja.

Installation, Testing and commissioning of 7 Meter Height Octagonal Hot Dip Galvanized pole with suitable Tools and Plants, wiring of Luminaires with all materials and construction of shallow foundation, with M25 grade concrete considering safe soil bearing of 10T/mtrs Sq.

125 KVA Silent D.G. Set :-125 KVA DG set with AMF Panel IS/IEC - 60034-1, IS:1460, IS:13018 :- Supply, fitting, fixing, installation and testing of 125 KVA /415 Volts, 3 Ph. Silent Diesel Generator Set with AMF Panel confirming to IS/IEC - 60034-1, IS:1460, IS:13018 The 125 KVA /415 Volts, 3 Ph. Silent Diesel Generator Set with AMF Panel shall have AC supply complete with engine (1500 RPM) and alternator with accessories including residential type silencer and fuel service tank, battery, nattery leads, battery charger with all accessories, including MCCB of suitable rating & standard set of tools and anti-vibration mounting pads, etc. The power command controller compactable with BMS, PC & PLC compelte as required, remote mointoring and data logging with digital voltage regulator through inbuilt AVR, digital governing including protection complete as required. Make:-Kiloskar/Jakson/Sterling. Supply of company make acoustic enclosure for 125 KVA CPCB approved Acoustic enclosure with 80 mm MS base plate, 1.6/2 mm CRCA sheet, 50 mm thick foam / 100 mm Rock Wool Insulation, 14 surface tank treatment, dully powder coated and painted with suitable colour with integrate Fuel Tank, services door, louvers (Fresh Air / Radiator), 1020 dia residential type Silencer, dimension as per company specification, complete with following accessories :- a) Fuel Tank. b) Batteries, battery leads and in built battery charger. c) Residential Silencers. d) First fill of lube oil. e) AVM Pads. f) OEM Manufacured AMF Panel with 500A /FP/36kA/MCCB Type. ( with inbuilt Control Breaker ( of suitable capacity of 500A MCCB Type and all type of meters (Voltmeter, Ammeter, KW/m, Hz/m, contractor, AMF Conroller etc as required ) and all other protections. In above supply item following work are also included :- i) Installation, fitting, fixing, testing and commissioning of the same. ii) Installation of Exhaust system for D.G. Set shall be as per Central & State Pollution Board Norms along (C.P.C.B.) with iron structure i.e. 5 mtr. above the height of nearest building. If this will be in the scope of the contractor then charges shall be extra and that will be the actual. iii) Test run for D.G. Set without load and with load (part wise ) at least 10-12hrs each time. Supply of inbuilt Control Breaker ( of suitable capacity of 200A,36KA/FP MCCB ,) with separate AMF Panel having 500A F/P MCCB Microprocessor release type with spreader links & extended rotary handle, AMF Controller, F/P NO NC 200A Contactor, and all type of meters (Voltmeter, Ammeter, KW/m, Hz/m) and all protection indications with alarm and with suitable arrangement for 1R 120 Sq mm 3.5 Core Al. Ar. Cable etc as required.

200 KVA Silent D.G. Set :-200 KVA DG set with AMF Panel IS/IEC - 60034-1, IS:1460, IS:13018 :- Supply, fitting, fixing, installation and testing of 200 KVA /415 Volts, 3 Ph. Silent Diesel Generator Set with AMF Panel confirming to IS/IEC - 60034-1, IS:1460, IS:13018 The 200 KVA /415 Volts, 3 Ph. Silent Diesel Generator Set with AMF Panel shall have AC supply complete with engine (1500 RPM) and alternator with accessories including residential type silencer and fuel service tank, battery, nattery leads, battery charger with all accessories, including MCCB of suitable rating & standard set of tools and anti-vibration mounting pads, etc. The power command controller compactable with BMS, PC & PLC compelte as required, remote mointoring and data logging with digital voltage regulator through inbuilt AVR, digital governing including protection complete as required. Make:-Kiloskar/Jakson/Sterling.

Supplying & fixing Split Type AC with installation and complete acessories with all taxes and royalty all complete as per E/I. CATEGORY "A" (Daikin Hitachi, L.G., Voltas or equi.) 2.0 Tr. 5 Star Split A.C (lnverter Type) IS- 1391-part-I

Supply of LED strip light 24volt DC with IP:65 rated in different colours of length Smtr. and power 5W per mtr. including driver. IS:10322partl/ section 7

Supply of 100 Watt Suspennded type industial COB LED highbay light with aluminium die cast heat sink(Make :- Philips- / Havells / Equivallent in Bajaj / Wipro.).

5 KVA online UPS Single phase input and single phase output power sysyter of input voltage range 230V AC.frequency range 40HZ tp 60Hz +-10% output voltage range 230V .

SITC of MS Battery Rack suitable for 30 to 35 UPS Battery Installation.

SITC of 65 AH Flat type Sealed Maitanace Free (SMF) Battery with 24 months replacement warranty. IS:1652:1991.

Supply of double LED Tube light Fitting made of diacast aluminium housing 2x20W LED Bettle Tube light sritable for surface or suspended mounded suitable for 230V, 50 Hz, single phase supply etc all complete as required, complete with electronic diver and LED etc., including connections with 1.5 Sq. mm FR PVC insulatted copper conductor and earthing the body etc. as requiered. Efficacy is 100 lm/W.temperature (5700K ± 355K. The Average life of 50000 burning hrs @L70 & Lumen maintenance as per L70 (Confirming to I.E.C. 62722)Make:- Havells/Philips/Crompton/Wipro.(Make :- Philips- / Havells / Equivallent in Bajaj / Wipro.).

Supply of 4 to 6Watt LED Foot lamp/ LED step light cast aluminium body and IP:54 protection. (Make :- Philips- / Havells / Equivallent in Bajaj / Wipro.).

Supply of 7 Oil (Fuel) Filter for 200 KVA DG set with all taxes and royalty all complete as per E/I.

Supply of Mobil Filter for 200 KVA DG set with all taxes and royalty all complete as per E/I.

Supply of Air (inner + outer) Filter for 200 KVA DG set with all taxes and royalty all complete as per E/I.

Supply of SMPS 24V Battery charger for DG set with all taxes and royalty all complete as per E/I.

Supplying Stablizer with installation and complete acessories with all taxes and royalty all complete as per E/I. 5 KVA wall mounted automatic voltage stablizer from range 140V to 280V

Supplying OUTDOOR STAND FOR 2 TR SPLIT AC with installation and complete acessories with all taxes and royalty all complete as per E/I. Drain Pipe for AC

3 core PVC insulated PVC sheathed copper conductor flat submersible cable. Supplying , Flat flexible submersible cable with ,copper conductor , PVC insulated and PVC sheathed as IS:7098-- 3 Core 4 Sq mm

Air Circulator Turbo Wall Fan :- Supply, fitting, fixing and testing of Air Circulator Turbo Wall Fan 450mm 230V/1440rpm heavy duty with metal blade along with front metal net and proper stand to be installed in the wall of main auditorium hall. Make:- Havells/Bajaj/ Crompton.

Supplying, installation, testing and commissioning of cubical type MV Panel made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 75mmx75mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears. (Main LT panel) INCOMER:- 315 Amp (36KA),manual,fixed,MCCB (2 Nos. ) CHANGE OVER:- 315 Amp,4 POLE (1 Nos. ) 1 Set phase indication lights (R, Y, B) 1 No. Volt Meter (digital type) with inbuilt VSS & control fuses. 1 No.Ammeter (digital type) with inbuilt ASS AL. BUSBAR CHAMBER:- 400 Amps. TP&N Aluminium bus bars (50 KA) OUT GOINGS:- 4 pole MCB 63A,16 kA with fixed thermal magnetic setting.(5 Nos. ) 4 pole MCB 40 A,16 kA with fixed thermal magnetic setting.(12 Nos. ) 6/32 A,DP (5 Nos. )

1.1 KV Cable End Termination:-Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.

3.5 Core 50 Sq. mm. (32mm)

3½ X 120 sq. mm (45mm)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required. 100 mm dia

Supplying, installation, testing and commissioning of microprocess base main fire alarm control panel with LCD Display lights. The panels shall have 240 volts AC power supply automatic Battery charger 24 Volts sealed lead acid maintenance free battries as complete with batteries, battery charger illuminated numeric digram complete as required.

Supplying, installation, testing and commissioning of optical type Smoke detector and mounting base with LED light complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed having two LED with cover complete with all connections etc as required

Supplying, installation, testing and commissioning of manual call box in suitable enclosure with arrangement to raise the alarm when the glass is manually broken complete as required.

Supplying, installation, testing and commissioning of duel tone electronic hooter / Flasher / Strobe suitable for wall mounted complete as required.

Providing and laying 19mm dia PVC conduit complete with required junction boxes in recessed / surface system with PVC insulated copper conductor cable of 2x1.5 sq.mm. in existing conduit as required.

Supply, Installation, Testing and Commissioning of electric driven, centrifugal type, single/multistage, end suction type, centrifugal pump of cast iron body, C.I impallers with carbon steel shaft & mechanical seal directely coupled with TEFC SQ cage foot mounted type induction motors suiitable for operation on 3 phase, 415 volts 50 Hz AC with IP 55 Protection for enclosure, horizontall foot mounted with class F insulation , complete in all respect as required or as directed by engineer incharge. Main Fire Pump 2850 Ipm at 88 m Head

Supply, Installation, Testing and Commissioning of Standby Diesel Engine driven main Pump suitable for automatic operation all complete in all respect as required or as directed by engineer incharge. 2850 lmp at 88m Head

Supply, Installation, Testing and Commissioning of electric driven Jockey Pump suitable for automatic operation all complete in all respect as required or as directed by engineer incharge. 180 lmp at 88m Head

Supply, Installation, Testing and Commissioning of electric driven Terrace Booster Pump suitable for automatic operation and consisting of of all respects as required. Terrace Booster Pump of 900 Ipm at 35 m Head

Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of cubical construction, wall mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42. For Pump Room

Supply, Installation, Testing and Commissioning of 'C' Class heavy duty MS PIPE confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, etc all respects as required.

200 mm diameter

150 mm diameter

Providing, laying, testing & commissioning of IS 1239 marked black M.S pipe including all fittings i.e bend, elbows, tees, flanges, reducing socket, nuts and bolts, gaskets etc fixed with welded / screwed joints. including necessary excavation, backfilling, removal of surplus soil etc. min. 1 mtr deep excavation and wrapping with anticorrosive treatement with 4 mm thick asphalt tape as per IS:10221, refilling the trench etc. OR fixed with screwed or welded joints, hanged with clamps, hanger supports, dash fasteners, bolts, nuts, rubber insertions etc including threading, cutting, welding, edge preparation, painting of approved colour over two coat of primer, cutting & making good the wall/ floor wherever required, complete as required or as directed by engineer incharge.

25 mm diameter

80 mm diameter

100 mm diameter

Providing and fixing S.S Fire Hydrant Valve of approved quality with 63 mm female, instant, ovlique, single outlet, 80 mm flanged inlet, brass spindle, cast iron wheel m A.B.S. blank cap and chain. conforming to IS: 5290 complete with companion flange, bolts, nuts, rubber insertion / compressed asbestos gasket etc. and painted in fire red colour.

Providing and fixing IS marked butterfly valve (PN 1.6) complete with companion flanges, bolts, nuts, rubber insetions etc.

80 mm diameter

100 mm diameter

150 mm diameter

Providing and fixing IS marked Gate Valve / Foot Valve (incase of -ve suction) complete with companion flanges, bolts, nuts, rubber insetions etc.

150 mm diameter

200 mm diameter

Providing and fixing check valve (NRV) complete with companion flanges, bolts, nuts, rubber insetions etc.

80 mm diameter

100 mm diameter

150 mm diameter

Providing and fixing in position 63 mm nominal bore and 15 m long synthetic fibre, CP fire hose pipe of approved make bearing IS: 636 -1988 type A mark and having TAC and MMD approved with a pair of 63 x 63 mm gun metal instantaneous type, heavy duty delivery hose coupling (conforming to IS: 903) bound and riveted to the hose pipe with copper rivets and copper wire complete.

Providing and fixing swinging, wall mounting type First Aid Hose Reel of approved quality and made from compresed steel sheet with dust cover, cast iron brackets including 30 m long, 19 mm nominal bore, high presure braided rubber hose as per IS:444 Type hose guide, PVC shut off nozzle with 6 mm outlet and 25 mm nominal bore gun metal inlet valve, bolts, nuts rubber insetion etc. painted in Fire red colour including cutting and making good the walls wherver required.

Providing and fixing in position short SS brach pipe of approved quality with 63 mm male instatneous type inlet and 15 mm outlet nozzle complete conforming to IS : 903

Supplying, fixing, testing & commissioning of 1 set of 63mm two way instantaneous fire brigade connection (FBC) with inbuilt NRV comprising of SS and four SS instantaneous male inlet coupling confirming to IS:604 with plug and cap with chain as required with nut & bolts, washers, high pressure gasket as required.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Supply fitting and fixing lowering 50 mm dia G.L. column pipe with all complete job as per direction of E/I.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water) TREE Plants

Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Schefflera high colour having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying plants Allyssum white in full bloom well developed Fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.

Providing and Displaying plants Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Dianthus dwarf in different colour fresh & healthy bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Missbranthemum in different colour well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Nasturtium in different colour well developed with fresh & healthy foliage with full bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge..

Providing and Displaying plants Verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge..

Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.

Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of plant Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

TOTAL FOR SCHEDULED ITEMS (A)

NON-SCHEDULED ITEMS

Providing , fixing Carbon Di-oxide Type , Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ & PESO approved ,Controllable Discharge Mechanism, Discharge Hose & Horn As per ‘IS 15683’ & ‘IS 2878’ ISI mark Fire Extinguishers (Wheel Type or Squeeze Grip Type). Operating Temperature :- (-)20oC to (+)55oC Suitable for ‘B’ ‘C’ Class of FIRE (4.5 Kg Capacity) with all complete as per direction of E/I.

Providing , fixing Dry Chemical Powder (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 20oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (4 Kg Capacity)

Providing , fixing 25 / 15 mm nominal gun metal gate valve class I with CI wheel of approved quality with union (Screwed end) with all complete as per direction of E/I.

Providing , fixing Hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect.

Providing , fixing Air release Valve / Drain Valve with all complete as per direction of E/I.

Providing , fixing Pressure Gauge Assemble with Gate/Ball Valve with all complete as per direction of E/I.

Providing , fixing Terrace Pump with all complete as per direction of E/I.

Providing , fixing MS Structure support for piping with all complete as per direction of E/I.

Providing , fixing Modular type Fire Extinguishers for electrical rooms (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 10oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (5 Kg Capacity) with all complete as per direction of E/I.

WOODEN SPORTS FLOORING SYSTEM : Supply, installation & finishing of BWF Certified SUNFLEX Bio-Cush free floating resilient wooden sports flooring system consisting of: The Surface Board: Made of Kiln Seasoned and treated imported Hard Maple wood surface board finished with 20 mm thick x 58 to 90 mm width and in random length in four sides tongue and groove shape and bottom side with air pass groove. The Under Frame: Made of imported pine wood runners of 65mm x 38mm treated with anti-termite solution and fixed on the bottom side with 18 mm thick Bio-Cushion shock pads made of EPDM rubber by staple through the two wings at 300 mm c/c. The Installation: The IPS sub-floor to be covered with a vapour barrier of 6 ml. (150 micron) thick to be placed on the leveled IPS sub-floor before laying the under frame. The runners having Bio-Cushion shock pads to be placed on the vapour barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/walls and to be covered with skirting. The Finishing: After installation the floor will be machine sanded using drum sanding machine and finished of imported non-skid SUNCOAT water based Polyurethane lacquer. Game line marking to be carried out in required colours before applying the finish coat. Timber: (a) All timber will be free from loose knots, bee or borer holes, splits, cracks & fungal attack. (b) All timber will be kiln seasoned to a moisture content of app.10 to 12%. (c) The varying colour of the wood due to its natural characteristics will not be considered as a defect. Sub-Floor Requirement: (To be carried out by the Civil Contractor) The IPS sub-floor, toweled and finished smooth, leveled to a tolerance of 3 mm is to be provided by the client for installation of our flooring system. The total height of the floor assembly including runners will be app.76 mm and therefore the surface of the under-floor should be brought to 76 mm below the level of the upper surface of the finished floor.

MOVABLE BADMINTON NET POLE WITH NET: Supply & installation of badminton net poles tournament standard made of heavy duty 46mm square steel pipe with 100 kg fibre weight on each side and non-tearing cover along with net all complete set as per international standard

Supplying, placing & fitting Aluminium Alloy Table Tennis - Table with all complete as per direction of E/I.

Supplying, placing & fitting Table Tennis Ball White with all complete as per direction of E/I.

Supplying, placing & fitting Table Tennis Rackets 100 - 105 with all complete as per direction of E/I.

Supplying, placing & fitting Steel Nylon Table Tennis Net Assembly with all complete as per direction of E/I.

Supply, installation, testing and commissioning of ETP PLANT , ACF FILTER LANT WITH MULTIMEDIA MBBR SYSTEM WITH OTHER ITEMS FOR 100 KLD

Supply, installation, testing and commissioning of 250 KVA Copper Wound Distribution Transformer Capacity in KVA 250 KVA Winding material Electrolytic Copper Voltage ratio 11/0.433 KV Primary Current 13.12 A Secondary Current 333.34 A Reference Standards IS: 1180 Level-1 IS: 1180 Level-2 Mounting (Indoor/Outdoor Type) Outdoor Type (or as per requirement) Tap Changer (On Load/Off Load Type) Off Circuit Tap Changer (OCTC) Tapping +5% to -10% in step of 2.5% Frequency 50 Hz Vector Group Dyn11 Impedance (with IS tolerance) 4.5 % Class of Insulation A Cooling ONAN Temperature Rise of Winding 50º C Temperature Rise of Oil 45º C Type of construction Double wound, Stack Core & Non Sealed Total Losses of 50% Load 980 Watt 920 Watt Total Losses of 100% Load 2930 Watt 2700 Watt Transformer Oil Specification As per IS: 335-1993 Transformer Oil Make Savita, Silvassa Reference Temperature 75º

SUPPLY & FITTING OF HOSTEL BED SINGLE :- 900 (W) x 650(H) x 2025(L) Under structure: - The legs are made of Square tube of size 25 x 25mm made out of MS pipe with a thickness of 1.2mm. The corner brackets are made of 2mm thick CRCA . Three nos. of Horizontal stiffeners are provided and made of Square tube of size 25 x 25mm made out of MS pipe with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. All Metal components are powder coated wiht 50-60 Microns DFT. Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate.

SUPPLY & FITTING OF HOSTEL STUDY TABLE: - 750 (W) X 600 (D) x 750 (H)-The table top and gable end are made of 25mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The modesty panel is made of 18mm thick Prelam Particle Board with both side decorative laminate with matching PVC edge Banding.

SUPPLY & FITTING OF HOSTEL STUDY CHAIR SEAT AND BACK MADE OF 12- 15MM THICK HOT PRESSED PLY WOOD UPHOLSTERED WITH HIGH DENSITY FORM AND FABRIC . HIGH DENSITY CUSHION ON SEAT FIXED ARMS CANTILEVER WITH METAL POWDER COATED FRAME CN : (W)584mm X (D)482mm X (H)939mm

SUPPLY & FITTING OF AUDITORIUM CHAIR WITH PUSHBACK MECHANISM. The seat frame assembly shall be ERW Tube / IS :3074-2005 GRADE 1: 19mm dia Round Pipe 1.2mm Thickness . The Seat profile shall be developed to help the users to get necessary comfort in popliteal region and ease of use in forward push for the seat sliding feature.Seat size shall be: 43.5 cm. (W) x 45.5 cm (D) x 11.5 cm (T)(Front) & 8.5 cm(T)(Rear). The backrest assembly shall be made of ERW Tube / IS :3074-2005 GRADE 1: 16mm dia Round Pipe 1.2mm Thickness & Extra Reinforcement 16 dia round pipe 1.2 mm. The back foam shall be designed with contoured lumbar support for extra comfort at upright and tilted conditions. The back shall be: 47 cm. (W) x 82 cm (H) x 11.0 cm (T)(Front) & 6cm (T)(Rear). The Automotive grade HR polyurethane foam for Seat and Back shall be moulded with Density = 55 +/- 5kgs/cu.m. as per JIS K 6401 with compression max 13%. The back & seat covers are made of injection moulded thermoform PPCP as per IS: 10915-1984 with 45.7 cm(W)x 75.5 cm(H)x 2.3mm(T) for back and 43.5 cm(W)x 45.5 cm(D)x 2.3mm(T) for seat. The armrest shall be made up of Polyurathane/wood with waterfall edge design. Also available with cupholder. The armrest shall be available with Polypropelene Cupholder . For Push Back mechanism – Coil Spring / Spring Steel IS : 4454 1981 GRADE 2. The fluimatic slider travels upto 60mm with metal ball and roller cage which results in PUSH BACK OF 140 + 10mm . Should have flexibility to restrict movement of the pushback and slider as per availability of aisle space. The mechanism houses the seat & back and shall has a special feature of upright resistance lock to avoid activation of sliding feature unless enough force shall be applied by user when tilting shall be required. For Auto Tip-up – Torsion Spring / Spring Steel IS : 4454 1981 GRADE 2 (part i). The chair shall rests on the ground on two Side wing frame with plywood with upholstery. Each Leg is a square tube of cross section 25mm X25mm x1.63mm Thickness as per IS:4923-1985 standards . The side panel frame is made of HRPO sheet metal as per IS :1079 -1994 standards. It shall be grouted to the floor using 2 nos. anchors for each panel through the base plate. All steel components shall be zinc passivated and powder coated (DFT 40-60 microns). The heavy duty 100 % polyester dyed yarn with 3mm + 0.5mm foam backing fabric is available in shades as per Wipro Box Office shade card. FR grade material confirms to IS 15061. The auditorium chair shall be designed to get mounted/grouted on floors with concrete(min 100 mm) or wooden flooring(min 50 mm) with specific grouting bolts. Provision for lights on sides for seats along the aisles using PP housing with 12mm watt lamp. Aluminum cut-outs available for row & seat numbering. Overall Dimensions shall be Back: (W)@ top-43.5 cm, (W)@ seat level-47 cm, (H)82.0cm, Seat : (W)@ rear-43.5 cm, (W)@ front-41 cm, (D) 45.5 cm, Overall Dimensions of Chair Seat Height - 44.5 cm. Height - 104.0 cm, Width & Depth of Chair Width(w1)-66.0cm(individual), width(W) - 56.0 cm.(common arm) and Depth-76.0 cm.(normal) , Depth(D2)- 66.0(seat folded),Depth(D3)-92.0 cm.(sliding)

SUPPLY & FITTING OF TABLE:- of size 1780x750 x750mmH, and Table Top made of 25mm thick prelam particle board confirming to IS 12823 Interior Grade with the exposed edges sealed with 2mm PVC edge banding. The height of the table top from the ground should be 740mm. supported on the legs and beams. Legs are made of 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated interconnected with tie member of 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated.

SUPPLY & FITTING OF LINEAR WORKSTATION SHARING 10 SEATER OVERALL SIZE: 6000X1260X1200MM HT 60mm thk Sliding Tile Base partition of 1200mm height in main Span.Single metal wire raceway cover at skirting level in partition.Soft board and White board in partition above table top.25mm thk. Prelam Particle board tabletop with PVC edge banding.Table top supported by 18mm thk Side Panel made of Prelam Particle board with PVC Edge banding.PVC Keyboard tray & Metal CPU trolley with castors.Provision of 3nos. Drawer Mobile Pedestal size: 400L X 450W X 600D, Pedestal made of 18mm thk Prelam Particle board with PVC Edge banding

SUPPLY & FITTING OF OFFICE TABLE :- The main table in size of 1650 x 750 x 740 (WDH) mm with the Side table in size of 1050 x 450 x 740 (WDH) mm with 3 drawer pedestal in size of 400 X 470 X 545 (WDH)mm. The table top is made of 25mm thick prelaminated Particle board from the visible side. The user side is of 25mm thick prelam particle board. All exposed edges have 2mm PVC edge banding. The Modesty has a prismatic shape and is made of 18mm thick prelam Particle Board. All exposed edges have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour along with a designer Slate Grey prismatic back. The understructure is made of 25mm thick prelaminated Particle board from the visible side. The user side is of 25mm thick prelam particle board. All exposed edges have 2mm PVC edge banding. Patneted squeeze can be provided for wire management.

SUPPLY & FITTING OF MEDIUM BACK REVOLVING CHAIR SIZE:(W)620mm X (D)490mm X (H)940mm Adjustable armrest locks any position.Deep cushioned back and seat conforms to body contours for proper alignment, posture and all-day comfort.Quick and easy adjustment regulated the height of chair relative to the floor.Chrome base and Nylon Casters.Back height of the chair can be adjusted up and down to suit body back height.5% post-consumer recycled content.30% total recycled content. COLOR BLACK

SUPPLY & FITTING OF VISITOR CHAIR is the perfect addition to our lineup of Fabric upholstered chairs. The chair has soft foam cushions encased in Blue fabric that is sure to liven up any workspace. Set on a sleek Cantilever base of powder coated metal, Chair has fixed closed loop arms. Dimension (W)480mm X (D)440mm X (H)820mm

SUPPLY & FITTING OF STEEL ALMIRAH CONVENTIONAL STORAGE (L)915MM X (D)485MM X (H)1981MM OFFICE STOREWELL WITH 4 SHELVES GAUGE: BODY: 22 GAUGE *DOORS: 20 GAUGE

SUPPLY & FITTING OF DESKLET CHAIR Seat & back in PVC Moulded MS powder coated Understructure Full Tablet

SUPPLY & FITTING OF CAFETARIA TABLE size: 1200L x 900W x 750Ht. Table top made of 25mm Plyboard with both side .8MM Approved Laminate with PVC Edge banding.Table top supported on MS powder coated "C" shape legs with horizontal connectors.

SUPPLY & FITTING OF STACKABLE CHAIR FOR CAFETARIA Size: (L)406mm X (D)406mm X (H)762mm Bent Wood chair with Veneer in PU polish finish ,Wooden Shell with SS 202 grade 16 Gauge heavy frame with T nut fitting

Supply, installation, testing and commissioning of VRV/VRF Air Conditioning outdoor units of below mentioned outdoor units complete with full Inverter scroll/twin rotary type compressor, necessary refrigerant R-410 A charge, air cooled condensor with propeller fan, controls. These units shall operate for cooling as well as heating as per requirement. Units having nominal capacity 14 or above shall be with dual compressors. Modules shall be sized so that atleast 85% of the mentioned nominal capacity is available after deration at 43 Deg C. (VRV/VRF system performance shall be in compliance with the recommendations mentioned in ASHRAE- 90.1.2010) 34 HP (18 HP + 16 HP) Modular

Supply, installation, testing and commissioning of below mentioned capacities VRV/VRF 4-way Cassette type indoor units complete with evaporator with coil having copper tube and aluminium fins as per manufacturer, necessary refrigerant charge, fan with motor, thermostat, control panel with cordless remote, galvanised supporting rod as per spcification and drawings. These units shall operate for cooling as well as heating as per requirement.

1.3 TR. For Green Room

1.6 TR for entrance lobby area.

Supply, installation, testing and commissioning of 19mm thick nitrile rubber covered with interwoven glass fabric for UV and mechanical protection insulated liquid and suction copper refrigerant piping with necessary refrigerant charge of following sizes along with necessary fittings to inter connect the condensing unit and the evaporating unit.

34.9 mm dia

31.8 mm dia

28.6 mm dia

22.2 mm dia

19.1 mm dia

15.9 mm dia

12.7 mm dia

9.5 mm dia

6.4 mm dia

Supply, Installation, testing & commissioning of above Air Handling Unit expansion kit with control kit and with corded remote is of same OEM.

Supply of Insulated refrigerant piping Y joints and headers for refrigerant piping as per Mfg. std. for following indoor units.

Supply, Installation, Testing and Commissioning of Central Controller including accessories which can work as a standalone centralized controller. It should be able to control/monitor the VRF IDUs/3rd party AHUs upto 64 Nos.

Supply, Installation, testing and commissioning of PVC drain piping with 9 mm thick Nitrile rubber insulation covered with interwoven glass fabric for UV and mechanical protection in form of pipe sleeves, necessry PVC fittings of following sizes as per specification for condensate drain.

Supply, fixing and testing of copper conductor control cable including termination also. 2C x 1.5 Sqmm. PVC Cable with PVC conduit.

Sheet Metal Duct as per SMACNA: Supplying, fabricating, installing and testing of factory fabricated sheet metal ducts of following thicknesses including necessary supports, flexible hangers with isolators, flexible connections, nut bolts, gasket, splitter dampers and vanes, volume control dampers etc. complete as per specification in accordance with the approved shop drawings and required by the specifications. GSS Ducting:

Thickness 0.63 mm sheet

Thickness 0.80 mm sheet

Thickness 1.00 mm sheet

Sheet Metal Duct site fabricated: Supplying, fabricating, installing and testing of site fabricated sheet metal ducts of following thicknesses including necessary supports, flexible hangers with isolators, flexible connections, nut bolts, gasket, splitter dampers and vanes, volume control dampers etc. complete as per specification in accordance with the approved shop drawings and required by the specifications. GSS Ducting:

Thickness 0.63 mm sheet

Thickness 0.80 mm sheet

Thickness 1.00 mm sheet

Supplying, installing, and testing of GI volume control damper within ducts to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per approved shop drawings.

Supplying, installing, testing and balancing of 315 mm dia of Jet diffusers with MS Damper used for spot cooling, adjustable in all directions upto a max of 60deg. 315 mm dia

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.As per technical specifications with all the necessary mounting accessories as required for complete installation.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 19 mm thick insulation.

Exhaust/ Fresh Air Louvers: Supplying, installing and testing of air Al outlet louvers with bird screen complete as per specification & drawings.

Fresh Air Louvers with VCD: Supplying, installing and testing of aluminium air louvers with volume control damper, fresh air filter and bird screen complete as per specification & drawings.

Back Draft Dampers: Supplying, installing, testing and commissioning of Back Draft damper having 18 gauge G.I. frame and 20 gauge louvers at exhaust/fresh air fans (for smoke).

Acoustic Lining of Ducts: Supplying, installing & testing of acoustic lining within supply and return air ducts as per the specifications. All ducts shown cross hatched on the approved shop drawings shall be provided with acoustic lining of open cell nitrile rubber insulation with density 140-160 Kg/ cum as per the specifications. 15 mm thick

INLINE FANS: Supply, installation, testing and commissioning of inline fan of following capacities. 800 CFM 15mm TSP

Supply and fixing of active three-way line array, composed of 6 SL 025 units and 1 SL 115 A unit. Each SL 025 consists of 2 5.25" loudspeakers and a 2.2" compression driver with polymer membrane attached to the VI-5 waveguide. The SL 115 SA subwoofer cabinet uses a 15" driver, with a 3.5" voice coil. It has digital signal processing, and the power is provided by a Class D amplifier of 800W peak in bass, 650W peak in midrange and 150W peak in treble, which incorporate thermal and overload protections. Independent RMS and peak limiters are used on each path, with Factory Fabricated Line Array Frame complete with suspension arrangement from ceiling included with the line array speaker. Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Single 18" 1000W Passive Subwoofer. Type of radiation: Direct radiation (bass reflex) Power (RMS): 1000W Frequency response (-3 dB): 35 Hz - 2000 Hz Sensibility: 98 dB Impedance: 8 ohm. Enclosure: 18 mm plywood. Grill: Steel with powder coating paint Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Single 12" Powered Speaker wedge design to be used as stage monitor whenever required. Power amplifier: 1000W Frequency resp. (-3 dB): 50 Hz - 20 kHz. Dispersion (H x V): 90° x 60°. Connectors: 1 x Combi XLR3/Jack TRS 1/4" female, 1 x XLR3 female, 1 x XLR3 male Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Surround Speaker slim design to be suspended from the ceiling/wall complete with C Shape/U Shape Bracket for mounting Elements: 1 x 8" woofer + 1" Comp Driver. Power handling: 200 W. RMS. Impedance: 8 ohm. Input connectors: 2 x XLN4. Sensitivity: 93 dB @ 1m/1W. Max SPL: 119dB. Frequency response: 70 Hz - 20 kHz. Dispersion (H x V): 75° x 55°. Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Single 5.25" Active Two Way Loudspeaker (pair) 50W with 5.25” LF Woofer and 0.75” Tweeter. Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Single 5.25" LF Woofer with 0.75” Tweeter, 40W RMS, ABS Plastic body, Wall Mount speaker with supplied mounting accessory (black/white color). Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Dual Channel audio amplifier with Switching Mode power supply. 8 ohm stereo output power: 1000 W x 2. 4 ohm stereo output power: 1750 W x 2. Frequency response: 20 Hz - 20 kHz. THD+N: 100 dB. Damping factor: >500. Voltage gain: 41 dB. Input impedance: 20 kohm balanced, 10 kohm unbalanced. Input sensitivity: 3.1 V / 1.55 V. 12.04 dBu / 6.02 dBu. Rear panel connectors: Power: Powercon; Signal: XLR3 for input and output; AMP: NL4 Protections: Soft start, VHF, DC, Overload, Clip, Limiting, Short-circuit, Over-temperature, Progressive volume Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Dual Channel audio amplifier with Switching Mode power supply. 8 ohm stereo output power: 500 W x 2. 4 ohm stereo output power: 850 W x 2. Frequency response: 20 Hz - 20 kHz. THD+N: 100 dB. Damping factor: >500. Voltage gain: 38 dB. Input impedance: 20 kohm balanced, 10 kohm unbalanced. Input sensitivity: 3.46 V / 1.73 V / 13 dBu / 6.97 dBu. Rear panel connectors: Power: Powercon; Signal: XLR3 for input and output; AMP: NL4 Protections: Soft start, VHF, DC, Overload, Clip, Limiting, Short-circuit, Over-temperature, Progressive volume Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of 8 in 8 out audio processor with matrix, equalisation, 8 balanced microphone or line level inputs on Terminal Block connectors. 8 balanced line level outputs on Terminal Block connectors Dante audio interfaces on RJ-45 connectors GPI/O multi-function ports on Terminal Block connectors Shall support, adaptive echo cancellation (AEC), adaptive feedback control (AFC), automatic gain control (AGC), automatic noise compensation (ANC) with various audio filters, 31 band graphic eq, built in USB sound card 2x2. Configurable GUI over Mac/Windows. Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of 24 Channel analog audio mixer with effects on board 16 Mic Inputs with 48V Phantom Power and HPF per Channel. 24 Line Inputs (16 mono and 4 stereo) 6 AUX Sends + 2 FX Sends 4 GROUP Buses + ST Bus 2 Matrix out Preferred Brand – YAMAHA / MAYERSOUND / ALLEN & HEATH / AUDIOFOCUS

SITC of Audio signal distributor. Mono mode 1 In/8 Out. Stereo mode 1 In/4 Out. Adjusting Output level. Balanced LINK output for interconnecting several units. Individual gain control of each channel Preferred Brand – WORKPRO / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of 12" Condenser Gooseneck Microphone. Polar pattern: Unidirectional + Cardioid. Frequency response: 50Hz~16kHz. Sensitivity: -54dB ±3dB/Pa. Output impedance: 200ohm±30%. Max S.P.L: 138 dB. S/N Ratio: 65 dB. Dynamic range: 110 dB. Preferred Brand – SHURE / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Dynamic Vocal Microphone for live application. Polar pattern: Unidirectional. Sensitivity: -58 dB +/- 3 dB (o dB= 1V/Pa at 1 kHz). Frequency response: 50 Hz~14 kHz. Output impedance: 600 ohm ± 30%. Preferred Brand – SHURE / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Condenser Instrument Microphone. Frequency response: 50 Hz - 18 kHz. Polar Pattern: Cardioid. Sensitivity: -45 +/- 3dB (0 dB = 1 V). Output impedance: 200 ohm+/- 30 %. Max SPL output: 140 dB. Dynamic range: 112 dB. Main supply: 48 V DC phantom power. Preferred Brand – SHURE / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of Dual Channel Handheld Wireless Mic system complete set with 1 dual channel receiver and 2 handheld microphone Frequency range: 610 - 640 MHz. IR synchronism between receiver and microphones. LCD display with AF, RF, gain and frequency information. Manual adjustment, free frequencies scan and squelch level functions. Balanced and mix unbalanced outputs. Frequency band - UHF true Diversity Frequency response - 20 Hz - 20kHz Sensitivity - 12dBuV (80dB S/N) S/N Ratio >105dB (A) THD<0.5% Dynamic range>100dB RF output power - 30 mW Preferred Brand – SHURE / MAYERSOUND / BOSE / AUDIOFOCUS

SITC of 12 Mic in Junction Box with Neutrik Flush Connectors XLR M/F as required

Supply of Short Boom Mic Stands (Black)

Supply of Long Boom Mic Stands ( Black)

Supply of XLR & Speakon Connectors (LOT) for speakers, microphones etc

Supply and laying of 2C, 14AWG Bare Copper Speaker cable in separate PVC pipes

Supply & Laying of 2C Shielded Microphone Cable

Supply & Laying of 12 Core Shielded Audio Multipair Cable (Mtr)

SITC of 16 U Equipment Rack Complete with Fans & Doors

STAGE CRAFT EQUIPMENTS:- Supplying & fittings of the following Stage craft equipments :- Main Curtain Mechanism ( Horizontal Type) with 3 phase motorized front curtain, vertical type (56’ x 18’) (Cloth and Stiching)- 1 Nos Front Upper wings (44’ x 3’) - (Cloth and Stiching)- 1 Nos Upper Sky (56’ x 3’) Black Glazzed cotton double layered cloth curtain including arrangement of Frill bar rope GI wire- 3 Nos Side wing (wooden 17’ x 3’) with Paint- 6 Nos Back wall covering with Ply board (6mm) & cloth (52’ x 17’)- 1 Nos with all complete labour charges & installation charges as per direction of E/I.

Supply of 4MP CCTV Bullet Camera - 1/3" Progressive Scan CMOS , 2688 × 1520 @30fps , 2.8/4/6 mm fixed lens, IR range: Up to 60 m, optional Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, Aperture F1.6.Should support Color: 0.01 Lux @ (F1.2, AGC ON), 0.018 Lux @ (F1.6, AGC ON), 0 Lux with IR,H.265+, H.265, H.264+, H.264, 120dB WDR, BLC/3D DNR/ROI/HLC.Must support IP67 Rating. Should support Line crossing detection, intrusion detection, unattended baggage detection, object removal detection, Scene change detection, audio exception detection.Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, HDD full, HDD error. Junction Box must be supplied alongwith Camera .Approve Make- Honeywell/Hikvision/Axis

Supply of 32 Channel Network Video Recorder with 4 SATA support and Up to 8TB capacity for each HDD. HDMI Outpout should be 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 1920 × 1080p/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz. Should support H.265+,H.265,H.264+,H.264 and decoding capbailities should be 2-ch @ 12 MP (20fps) / 4-ch @ 8 MP (25fps) / 8-ch @ 4MP (30fps) / 16-ch @ 1080p (30fps). Incoming Bandwidth should be 256MBPS.Supports various special function cameras, including thermal camera/fisheye/people counting/heatmap/ANPR (automatic number plate recognition). Approve Make- Honeywell/Hikvision/Axis

Supply of 6TB Surveillance Hard Disk. Make- Seagate/WD as per direction of E/I.

Supply of 24 Port Giga Ethernet Managed PoE Switch with 2 SFP; Make -CSICO/HP/Allied Telesis as per direction of E/I.

Supply of 6U 600x500 Network Rack with accessories. Make-Dlink/VALRACK/APW as per direction of E/I.

Supply of UTP Cat6 Cable-23 AWG, 305 Mtr Box as per direction of E/I.

Supply of 55 inch 4K LED Panel, Make-LG/SAMSUNG/Hitachi as per direction of E/I.

Add GST 18 %

Add Labour cess 1%

M/S PRASAD CONSTRUCTION & CO (BID ID -640630)