Roof treatment, Internal and External Painting of Hospital Building and Internal and External Distempering/Painting of Adm. Block ,store-tailor shop, Q.G , FWC Building

Amount

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade: Old work (one or more coat applied @ 0.90 ltr. / 10 sqm)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and required shade and colour complete. As per manufacturer's specification. One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufactured required colour to give an even shade: One or more coats on old work

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 re/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade: Old work (one or more coat applied @ 0.90 ltr. / 10 sqm)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and required shade and colour complete. As per manufacturer's specification. One or more coats on old work.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufactured required colour to give an even shade: One or more coats on old work

12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and required shade and colour complete. As per manufacturer's specification. One or more coats on old work.

Finishing walls with acrylic smooth exterior paint of required shade: Old work (one or more coat applied @ 0.90 ltr. / 10 sqm)

Painting with synthetic enamel paint of approved brand and manufactured required colour to give an even shade: One or more coats on old work

12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and required shade and colour complete. As per manufacturer's specification. One or more coats on old work.

Finishing walls with acrylic smooth exterior paint of required shade: Old work (one or more coat applied @ 0.90 ltr. / 10 sqm)

Painting with synthetic enamel paint of approved brand and manufactured required colour to give an even shade: One or more coats on old work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade: Old work (one or more coat applied @ 0.90 ltr. / 10 sqm)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and required shade and colour complete. As per manufacturer's specification. One or more coats on old work.

Applying priming coat: with ready mixed Pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufactured required colour to give an even shade: One or more coats on old work

RICH HEIGHTS CONSTRUCTION PRIVATE LIMITED

Mazid Hussain

MA BRAHMANI ASSOCIATES

pardeep kumar contractor and builders

SIDDHARTHA GUHA BISWAS

sovansamanta

RITESH KUMAR GUPTA

BHARAT CONSTRUCTION COMPANY

GUNGUN ENTERPRISE

RAJ LAXMI SALES AGENCY

m.a builders

panwar construction company

RAVIRA INFRATRADE & E-COMMERCE PVT LTD