Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
10 Feb 2026, 3:00 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Advance Correction Slip No.1(Rly. Board letter No.2022/CE-I/CT/GCC-2022/Policy date 14.07.2022.) PLEASE ATTACHCOPY OF AUDITED BALANCE SHEET.
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Advance Correction Slip No.1(Rly. Board letter No.2022/CE-I/CT/GCC-2022/Policy date 14.07.2022.) PLEASE ATTACHCOPY OF ANNEXURE VI-B.(Proforma is available in document).
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Nature of work - Wiring/ Re-wiring in buildings with associated electrical works like control gear and protection arrangements in residential buildings or service buildings. OR Lighting arrangement in buildings, circulating area, yard, street etc. with associated electrical works. OR wiring/Rewiring, Lighting arrangement in building with associated electrical works.
12 conditions · 7 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer should visit the site before quoting the bid.
This works contract and shall be governed by "General conditions of contract-Apr- 2022
Tenderer should read the technical document attached under document section and all the terms and conditions.
Ratlam Division (1) UJN - Electrical work in connection with provision of one 6 meters wide FOB with cover with ramp between PF01 and PF08 located at BPL end (Simhastha 2028). (2) UJN - Electrical work in connection with provision of one 6 meters wide FOB with cover with ramp between PF01 and PF08 located at RTM end (Simhastha 2028).
EL-2025-26-40~WR
EL-2025-26-40
Open
Works - General
12 Months
Ratlam, Madhya Pradesh
₹0
₹1.4 L
10 Feb 2026
17 Jan 2026
27 Jan 2026
49 items across 1 schedule · ₹72,34,226.74 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply and fixing of LED street light 70W including connection as per specification. | Numbers | 10.00 | 4,308 | 43,080 |
| 2 | Supply, replacement, fixing, testing, connecting and commissioning of 60 Watt or above LED inverter street lights fittings with PDC housing, IP 66 and inbuilt battery backup with auto ON/OFF and dimming option(Dimming 50% on battery backup) and backup of up to 3 to 4 hrs. LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute lights ,to position and protect the light source, and to connect the light source to a branch circuit. The light source itself may be an LED array and LED module, or an LED lamp.(2):-Supplied LED luminaries shall confirm to IS: IS:16101(2012) IS:16106(2012).Light Source(LED) in the Luminaries should be of make:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS/LEDNIUM. (2):-LEDs toIS:16105(2012)IS:10322.IS:16108(2012),IS:10322,IEC:62471.TypeLED:- High power LED,SMD(Surface Mounting device).1.Inputoperating voltage :-105-295 V AC.2:- Normal Voltage-220VAC,3.Driver type: constant current driver with short circuit protection. 4.LED life:- >50000 burning hours .5.Depreciation:- 30%max.after 50000 burning hours.6.Control of distribution:-Full cut off.7.Surge protection:4KV (internal)+10KV(External Surge protection device) .8.Drive component :Industrial grade only.9.Efficiency of driver electronic: > 85%.10.Beam angle:>=140 degree along with road and &>=80 degree across the road.11.Colourtemperature:5000-6500K.12.Colour rendering index(CRI):>=75.13.Ingress protection :IP-66.14.Lumen output:>120 lumens/watt.15.Power factor:>;0.95. 16.Total harmonics distortion(THD):-<15%.17.Lamp cover :Toughened glass or UV stabiles poly carbonate.18.Finishing:Power coated/Anodized.19.Secondry optics:poly carbonate reflector/ polycarbonates lens.20.Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum.21.Mounting:Suitablefor existing pole/Truss/Lantern mounted.22.Certificate:Firm to submit LM80(In respect of LED used)& LM79(In respect of lumen are used) test certificate from National/International accredited Laboratory and OEM certificate for compliance of BIS/IEC.23.Warranty:Firm to submit warranty certificate for five year along with the supply .All fittings should be embossed/sticker with manufacturing date and warranty details at time of supply.20.Theweight of fixture should be standard for better heat resistance of LED PCB .All fittings shall be fitted with new suitable bend/elbow with clamp and proper nut and bolt and connection with twisted twin flexible cord of minimum size 16/1 mm copper conductor as per relevant technical specification. Materials parameters must remain unchanged during entire warranty period. | Numbers | 10.00 | 7,368.97 | 73,689.7 |
| 3 | Supply of material & wiring of light point/ceiling rose point by 1.5mm² copper PVC cable casing-capping pipe/PVC pipe with earth wire without switch. | Numbers | 800.00 | 133.06 | 1,06,448 |
| 4 | Supply of material & wiring of ceiling rose/ light point by 1.5mm² copper PVC cable casing-capping pipe/PVC pipe with earth wire. | Numbers | 100.00 | 317.38 | 31,738 |
| 5 | Supply & fixing of Switch board medium size as per specification. | Numbers | 20.00 | 144.34 | 2,886.8 |
| 6 | Supply & fixing of Switch board small size as per specification. . | Numbers | 100.00 | 57.7 | 5,770 |
| 7 | Supply & fixing of 6Amp Cap. Plug socket 5Pin on existing board including connection. | Numbers | 100.00 | 61.75 | 6,175 |
| 8 | Supply & fixing of 6Amp Cap. Plug socket 5Pin on separate board with wiring by copper cable PVC 2.5mm² including connection. | Numbers | 60.00 | 282.81 | 16,968.6 |
| 9 | Supply & fixing of 6/16 Amps Cap. Power Plug socket 5Pin on Separate board with wiring by Copper cable PVC 2.5mm² including connection. | Numbers | 40.00 | 323.09 | 12,923.6 |
| 10 | Supply & fixing Double pole MCB On board including connection. | Numbers | 40.00 | 332.28 | 13,291.2 |
| 11 | Supply of materials & wiring of sub main by copper cable PVC 2x2.5mm² with earth wire in PVC casing-capping/PVC pipe including connection. | Metre | 3600.00 | 45 | 1,62,000 |
| 12 | Supply of materials & wiring of sub main by copper cable PVC 2x4mm² with earth wire in PVC casing-capping/PVC pipe including connection. | Metre | 1800.00 | 99.67 | 1,79,406 |
| 13 | Supply and laying PVC Truncking system 50X50mm for sub main wiring | Metre | 400.00 | 204.63 | 81,852 |
| 14 | Supply & Fixing of LED Tube 18/20W Light fitting including connection as per specification. | Numbers | 20.00 | 716.69 | 14,333.8 |
| 15 | Supply & Fixing of LED Tube 40W Light fitting including connection as per specification. | Numbers | 550.00 | 1,817.22 | 9,99,471 |
| 16 | Supply, erection, testing & commissioning of LED High Bay 120 Watt Luminaries as per specification. | Numbers | 20.00 | 12,800.59 | 2,56,011.8 |
| 17 | Supply & fixing of LED Area light 60-70W including connection as per specification. | Numbers | 20.00 | 5,827.16 | 1,16,543.2 |
| 18 | Supply, replacement, fixing, testing, connecting and commissioning of Inverter LED batten with square profile and poly carbonate /Extruded Aluminium channel. Lithium Ion battery with charging time 8 hours-10 hours and back up time up to 3 to 4 hours energy efficient luminaries complete with all accessories of capacity 20 watt, 4 feet length, LED lamps with suitable current control driver circuit ,suitable for surface/recessed mounting as per IS:10322. LED -Luminaries:-(1) A complete LED lighting unit consisting of a light -source and river together with parts of distribute light, to position and protect the light source, and to connect the light source to a branch circuit. The light source itself may be an LED array and LED module, or an LED lamp. (2):-Supplied LED luminaries shall confirm to IS: 16101(2012) IS: 16106(2012).Light Source (LED) in the Luminaries should be of make: - (1):-NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to IS:16105(2012).IS:16108(2012),IEC:62471.1.Input operating voltage :- 105-295 V AC.2:-Normal Voltage- 220V AC.3.Driver type: constant current driver with short circuit protection(For tube light).4.Control of distribution:-Full cut off.5.Drive component :Industrial grade only .6.Efficiency of driver electronic:>= 85% (For tube light).7.Colour temperature:5000-6500K(For tube light).8.Colour rendering index(CRI):>75(For tube light).9.Ingress protection :IP-20.10.Lumen output: >=100 lumens/[email protected] drive current(For tube light).11.Power factor:->0.90(For tube light). 12.Total harmonics distortion(THD):- <20%(For tube light).13.Lamp cover :Acrylic cover which does not result in loss of lumens.14.Finishing:Power coated /Anodized.15.Secondry optics:poly carbonate reflector/ poly carbonate lens.16.Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum.17.Mounting :Suitable for surface mounting/recessed mounting.18.Certificate:Firm to submit LM80(In respect of LED used)& LM79(In respect of lumen are used) test certificate from National/International accredited Laboratory and OEM certificate for compliance of BIS/IEC.19.Warranty:Firm to submit warranty certificate for five yearlong with the supply. All fittings should be embossed/sticker with manufacturing date and warranty details at time of supply.20.Theweight of fixture should be standard for better heat resistance of LEDPCB. All fittings shall be fitted as surface mounting/recessed mounting with twisted twin flexible cord of minimum size 16/0.2 mm copper conductor as per relevant technical specification. Material parameters must remain unchanged during entire warrantyperiod.20watt. | Numbers | 240.00 | 759.25 | 1,82,220 |
| 19 | Supply & fixing of Brushless DC (BLDC) Motor Celling Fan, ISI marked, sweep size: 1200/1400 mm with electronic fan regulator as per specification. | Numbers | 20.00 | 3,448.52 | 68,970.4 |
| 20 | Supply & fixing of exhaust fan 300 mm sweep including connection as per specification. | Numbers | 4.00 | 1,573.28 | 6,293.12 |
| 21 | Supply & fixing of exhaust fan 250 mm sweep including connection as per specification. | Numbers | 4.00 | 1,509.61 | 6,038.44 |
| 22 | Supply & fixing of Control panel 400 Amp. Cap. Complete with MCCB, change over switch with as per specification. | Numbers | 2.00 | 2,25,572.14 | 4,51,144.28 |
| 23 | Supply & fixing of Control panel 200Amp Complete with MCCB as per specification. | Numbers | 4.00 | 75,688.32 | 3,02,753.28 |
| 24 | Supply and fixing of Control panel 100Amp with MCCB& MCB's etc. as per specification. | Numbers | 8.00 | 15,080.72 | 1,20,645.76 |
| 25 | Supply & fixing of Distribution box 63A complete as per specification. | Numbers | 12.00 | 12,499.71 | 1,49,996.52 |
| 26 | Supply of material , erection, testing & commissioning of Copper plate earthing arrangement as per specification | Numbers | 4.00 | 10,504.31 | 42,017.24 |
| 27 | Supply and fixing of GI Strip 25mm x 6mm for earthing as per specification. | Metre | 400.00 | 39.79 | 15,916 |
| 28 | Supply of material, erection, testing & commissioning of GI pipe earthing arrangement as per specification. | Numbers | 20.00 | 2,103.74 | 42,074.8 |
| 29 | Supply and fixing of perforated GI cable Tray 100x50mm as per specification. | Metre | 1600.00 | 440.93 | 7,05,488 |
| 30 | Supply and fixing of perforated GI cable Tray 300x50mm as per specification. | Metre | 200.00 | 1,093.28 | 2,18,656 |
| 31 | Supply of material, erection, testing & commissioning of cable junction box with bus bar as per specification. | Numbers | 60.00 | 2,382.81 | 1,42,968.6 |
| 32 | Supply of material, erection, testing & commissioning of cable junction box with cutout/MCB as per specification. | Numbers | 60.00 | 1,305.64 | 78,338.4 |
| 33 | Supply of material, erection, testing & commissioning of cable junction box with cut out/MCB as per specification. | Numbers | 60.00 | 832.33 | 49,939.8 |
| 34 | Supply and laying 3 core, 2.5 sqmm, flexible pvc insulated multicore FRLS pvc sheathed multi stranded cables copper conductor for voltage grade up to 1100 v conforming to is-694:2010 as per specification. | Metre | 1000.00 | 120 | 1,20,000 |
| 35 | Supply and laying 3 core, 4 sqmm, flexible pvc insulated multicore FRLS pvc sheathed multi stranded cables copper conductor for voltage grade up to 1100 v conforming to is-694:2010 as per specification. | Metre | 1000.00 | 190 | 1,90,000 |
| 36 | Supply and laying 3 core, 6 sqmm, flexible pvc insulated multicore FRLS pvc sheathed multi stranded cables copper conductor for voltage grade up to 1100 v conforming to is-694:2010 as per specification. | Metre | 600.00 | 275 | 1,65,000 |
| 37 | Supply and laying 4 core, 10 sqmm, flexible pvc insulated multicore FRLS pvc sheathed multi stranded cables copper conductor for voltage grade up to 1100 v conforming to is-694:2010 as per specification. | Metre | 1000.00 | 560 | 5,60,000 |
| 38 | Laying of 4core 120sqmm UGAC with heat resisting insulation PVC Insulated and strip type Sheathed Armoured Aluminium Conductor cable with 1x8SWG GI wire in existing trench/Pipe/ in air | Metre | 1000.00 | 19.28 | 19,280 |
| 39 | Laying of 4core 70sqmm UGAC with heat resisting insulation PVC Insulated and strip type Sheathed Armoured Aluminium Conductor cable with 1x8SWG GI wire in existing trench/Pipe/ in air. | Metre | 1000.00 | 19.28 | 19,280 |
| 40 | Laying of four Core 25sqmm UGAC with heat resisting insulation PVC Insulated and strip type Sheathed Armoured Aluminium Conductor cable with 1x8SWG GI wire in existing trench/Pipe/ in air | Metre | 3000.00 | 19.28 | 57,840 |
| 41 | Supply of double walled corrugated HDPE Pipes of size 120mm Outer dia &103mm inner dia as per specification. | Numbers | 20.00 | 1,632.33 | 32,646.6 |
| 42 | Supply and laying of 65 mm dia.DWC pipe complete as per specification. | Metre | 800.00 | 57.17 | 45,736 |
| 43 | Design, manufacture, Erection and installation of display of wall / hanging /floor mounting type LED illuminated sign / direction boards in full elliptical / halfelliptical / semi elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall be less than 160 deg. The approved colour text and graphics shall be printed / router cut on mono mericcalendared vinyl of 70 m thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall havethe integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W/ sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5mm thick SS 304 should be provided as per specification. | Square Foot | 240.00 | 2,046.32 | 4,91,116.8 |
| 44 | Supply , erection , testing & commissioning of ON Line UPS 2 KVA with isolation transformer suitable for single phase AC input and single phase output ,floor mounted type Back up time -120 minutes as per specification. | Numbers | 4.00 | 76,381.5 | 3,05,526 |
| 45 | SITC of Online UPS of Rating 5.0 KVA With Battery Of Backup Time 120 Minutes as per as per specification. | Numbers | 2.00 | 1,45,250 | 2,90,500 |
| 46 | Supply of material, erection, testing & commissioning of Auto change over switch 32 Amp as per specification. | Numbers | 4.00 | 3,012.34 | 12,049.36 |
| 47 | Supply of material, erection, testing & commissioning of Auto change over switch 63 Amp as per specification | Numbers | 4.00 | 6,638.91 | 26,555.64 |
| 48 | Digging of trench | Metre | 800.00 | 123.31 | 98,648 |
| 49 | Digging of Pacci trench | Metre | 300.00 | 313.33 | 93,999 |
| Schedule total | ₹72,34,226.74 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
WRProcurementofLEDlightfittingsSpecification.pdf
ATTACHMENT
1.Letterofcreditasmodeofpayment04-06-2018.pdf
ATTACHMENT
2.ProcedureforpaymentofContractorbillasperGSTImplementation_GST_290617.pdf
ATTACHMENT
3.PBGproforma.pdf
ATTACHMENT
4.NOrelativecertificate.pdf
ATTACHMENT
5.certificateforrailwayemployeere-engagement_11.pdf
ATTACHMENT
6.BidsecurityAnnexure-VIA.pdf
ATTACHMENT
7.FormatVA.pdf
ATTACHMENT
8.FormatforAnnualcontractualturnoverAnnexure-VIB1.pdf
ATTACHMENT
9.GCCAPRIL-2022.pdf
ATTACHMENT
10.GCCACS-1dt.14-07-2022_1.pdf
ATTACHMENT
11.GCCACS-2dt.13-12-2022.pdf
ATTACHMENT
12.GCCACS-3dt.26-04-2023.pdf
ATTACHMENT
13.GCCACS-4dt.07-08-2023.pdf
ATTACHMENT
14.GCCACS-5dt.20-10-2023.pdf
ATTACHMENT
15.GCCACS-6dt.21-12-2023.pdf
ATTACHMENT
16.GCCACS-7dt.25-09-2024.pdf
ATTACHMENT
17.GCCACS-8dt.20-12-2024.pdf
ATTACHMENT
18.GCCACS-9dt.09-01-2025.pdf
ATTACHMENT
19.GCCACS-10dt.27-03-2025.pdf
ATTACHMENT
20.ClarificationannexureV.pdf
ATTACHMENT
21.TERMINATIONCONTRACT.pdf
ATTACHMENT
TS755ElectricalTechnicalSchedule-UJN-02Nos6MFOB.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .