SPECIAL REPAIRS TO HEAVY VEHS GARAGE AT NDA KHADAKWASLA

Amount

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where directed

M&L for providing 150 mm thick M-20 grade cement concrete flooring with RMC by using 20 mm graded coarse aggregates as in hardstanding finished even and smooth with without using extra cement and brooming with tremix compaction complete including necessary formwork and all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (Using 20mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen85/25 and sand in the proportion of (1:3 ) by weight complete all as spcified and directed.

M&L for forming expansion joints 100 mm deep x 12 mm wide filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade A complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound.grade A complete all as specified and directed..

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as directed.

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:6 included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed

M&L for 10mm thick cement plaster on concrete surface in cement mortar (1:3) included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paint etc complete all as specified and directed.

Ditto all as per item No 09 above but in ceiling etc complete all as specified and as directed.

M& L for complete removal of existing treatment of old wall surfaces and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete over a coat of wall primer as per manufacturer's specification complete all as specified and as directed

Dismantling asbestos cement (corrugated , semi corrugated etc, ) sheets in roof covering . Complete all as specified and directed.

S&F Galvanised corrugated mild steel sheeting 0.80mm thick with two corrugations side lap, fixed with 'L' type or 'J' type of cranked hook in lieu of screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed

S&F Galvanised plain mild steel sheeting 0.80mm thick in Ridge, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Taking down of existing tarfelt and cement plaster of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming , wire brushing incl removing the debrish out complete all as specified and directed

Demolition of roofs, any thickness including plastering & leeping (whether full or part) removal of debris at a distance exc 250m but not exc 500m and depositing where directed complete all as specified and directed

Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for cement concrete type B0 (1:2:4) 12.5mm size graded stone aggregate ) in roof padding complete all as specified and directed

M&L for 20mm thick rendering on concrete surface on roof in cement plaster (1:4) finished even and fair without using extra cement by using Dr. fixit @ 3% of wt of cement contentcomplete all as specified and directed Note: Water proofing Compound measured and paid seprately

Supply only water proofing compound all as specified and directed

M&L for cutting grooves in brick / stone wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3). complete all as specified and directed

M&L for preparing plastered surfaces,with approved bituminous primer @100 gms/sqm and applying water proofing treatment on wall,roof,chajja's,gabble walls, edges (at any respective height of bldg )etc and stick with non-woven polyster matt modified APP Membrane 3mm thick as reinforcement weighing not less than 3.5 Kg/sqm and applying one coat of aluminium paint on top of the membrane (at any height ) complete all as specified and directed

M&L for providing cement concrete PCC (1:2:4) type B1 (20mm graded stone aggregate) as in coping to parapet wall/kerbs in roof with projection of 50mm from the outer surface with a groove of 12 mm x 12mm as drip course in bottom side including necessary form work etc complete all as specified and as directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quions /archers etc and removing debris from site to outside MoD land complete all as directed.

M&L for precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall all as specified and directed.

M&L for plastering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra lime or cement complete all as specified and directed.

M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

M&L for flush pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar 1:4 complete all as specified and directed.

S&F in repairs eaves boards clean sawn in roof 20mm thick complete all as specified and directed.

M&L or paration of new wooden surfaces of any description ,not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as directed.

Taking down chowkhats or frame not exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as directed.

S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed

S&F second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end) complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars etc complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded etc complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane etc complete all as specified and directed.

Dismantling structural steel work including, rafter , Purlin, doors , gate but excluding framed trusse etc complete all as specified and directed.

S & F wind ties for roof incl securing bolts, posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire etc. including all necessary drilling, bolting or confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and including re-fixing in position complete all as specified and directed.

S&F 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi- nium frame work with screw as work in ceiling flat or sloping complete all as specified and directed.

S&F anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling etc complete all as specified and directed.

S&F 100mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed

S&F 100mm aluminium handles, cast type, anodised complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed

Dismantling of existing water tanks Exc 250 not Exc 500 and removing to store complete all as specified and directed.

S&F Rotational moulded polye- thylene water storage tanks 500 Ltr capacity three layered(cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I (2009) complete all as specified and directed.

S&F in repairs Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.

Taking down 15 mm bore mild steel tubing of medium grade and connections incl cleaning for refixing or removal from site complete all as specified and as directed

Ditto all as per item No 53 above but for 20 mm bore

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and as directed

Ditto all as per item No 53 above but for 20 mm bore

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where complete all as specified and directed.

M&L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for 25 mm thick cement concrete type B-1, (1:2:4) (Using 20 mm graded stone aggregate) as in sub base of tiles complete all as specified and directed.

Taking down exiting copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as directed

M&L for point wiring in and including new PVC conduit medium grade with the help of multi-stranded unsheathed FRLSH copper cable 1.5 sqmm 650/1100V conforming IS:3419 -1988 adhereing to colour code including earth wire of the size 1.5 Sqmm green colored with modular steel or cast iron terminal boxes and modular cover plates as required at site including making good the distrubed surfaces and matching it with existing surface for the following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b)Ditto all as per item No. 61 above but one 3 pin socket outlet, 5/6 Amps on the same board with other switches

(c)Ditto all as per item No. 61 above but one 3 pin socket outlet, 5/6 Amps, independent

M&L for point wiring with 4 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable in and including PVC conduit not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 4 sq mm copper conductor as earth wire to common earth dolly all as specified and directed.

S&F modular switch 1 way 10 A 1 module complete all as specified and directed.

S&F Modular socket 6 A 2/3 Pin 2 module complete all as specified and directed.

S&F modular switch 1 way 16 A 1 module complete all as specified and directed.

S&F Modular socket 6 A/16A 2/3 Pin 2 module complete all as specified and directed.

S&F modular fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed.

S&F in replacement for ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

S&F 20 watt, 230V surface and wall mounted LED Smart batten, Smart extruded aluminium housing with higher efficaay.Microwave sensor to save more energy.Reduces the light intensity by 70% during non occupancy including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed Make- Bajaj BCLAB 20W LED P S or equivalent make as mentioned at makes list in PS

S & F in replacement of 100 watts flood light, LM6 aluminium or higher grade powder coated and water proof pressure die cast aluminium enclosure, with inbuilt electronic drivers and IP 66 protection complete ,Single phase, etc fixing in MS chanel by drilling hole of suitable , size, using nut, bolts and washers of suitable size including suitable mounting structure on existing pole as reqd at the site complete all as specified and directed

S&F in replacement LED building security Sensor light fiitting 24 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having seperate driver compartment complete fixing with GI bracket made out of suitable GI pipe light grade suitable length bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed Make- Luker LST-24SEN or equivalent make as mentioned at makes list in PS

Dismantling and refixing the ceiling fan/Exhaust Fan complete of any type and size, cleaning, servicing, painting greasing to bearings checking of nuts bolts, safety split pin, bushes, capacitor and complete spray painting as directed Note :- Expendable stores like cotton waste/cleaning materials, grease, lubricants, machine screws, safety split pin, bots/nuts and transportation to and from site to work place are deemed to be included in rate quoted.

S&F ceiling fan complete with blades, down rods and other accessories, 230 V, 1200 mm sweep with Minimum air delivery of 210 CMM BEE Five star rated with brushless direct current motor (BLDC), white/Ivory in colour all as specified and directed

S&F Metal body exhaust fan, AC single phase, 240 V,900 RPM, size 300 mm sweep double ball bearing with louvers all as specified and as directed . Note: Separate louvers of suitable size is to be provided and the cost of same is deemed to be included .

M&L for Making of hole for fixing of New exhaust fan / Shifting of exhaust fan from one place to another place required at site making good the disturbed surfaces all as specified and directed

Taking down exiting copper/aluminium sub main wiring complete for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as directed

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 04 Sqmm cable with 01run of 4 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for sub main wiring with Two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and one run copper cable 6 sqmm continuous earth wire complete all as specified and directed. Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

S&F in replacement sheet metal enclosures with double pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as specified and directed. Make: Legrand Cat part: 5078 10 or equivalent make as mentioned at makes list in PS

S&F in replacement MCB DB 8 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,concealed in wall complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as specified and directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F in replacement MCB DB 02 way SPN single door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and existing circuits complete as reqd at site complete all as specified and directed.

S&F in replacement MCB DB 04 way SPN single door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and existing circuits complete as reqd at site complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed.

S&F in replacement of C Curve MCB SPN 40 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed

S&F in replacement of C Curve MCB SPN 32 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed

S&F MCB TPN 40 Amps 415V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed. .

M&L for Earthing complete with galvanised iron earth plate electrode 600 x 600 x 6mm as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead of 4.0mm dia, by means of bolts & nuts, to GI and connected to earthing test point all as shown in elecrical plate No. 3 of SSR Part-I of 2009* specified or indicated and testing on completion including excavation / earth work in any type of starta, PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric (XPM) weight not less than 4 KG/sqm cast iron frame, funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade 7.5 meter long etc complete tested on completion all as specified and directed. Note: 1. Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. 2. GI wire above 7.5m will be measured and paid seperately.

Prem Singh

Sayili Enterprises

Harish Enterprises