PROVN OF 02 X TOILET BLOCKS AT RECTS TRG AREA, PROVN OF TOILET BLOCK IN MIL BAND TRG AREA AND PROVN OF WATER PIPE LINE CONNECTION FOR PT GROUND, CSD CANTEEN AND DRILL GROUND AT GRC KAMPTEE.

Amount

Surface excavation not exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes & laying of cable, pole etc and getting out in soft/ loose soil complete all as specified and directed.

M&L for hard core of broken stone of gauge not exc 63mm, deposited, spread, levelled in layers not exc.15cm thick, watered, rolled/rammed to a true surface complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix as in footings & plinth beams (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for RCC M-25 design mix as in columns (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded stone aggregate) as in roof beams & lintel beam etc complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for mild steel TMT bar 10mm dia and over, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bar 8 to 10mm dia as in stirrups and distribution bar, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for formwork to sides and soffits of plinth beam, sides of footings, base of columns and similar work with rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides of columns and similar work with rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides and soffits of beam, lintel rough finished surfaces etc complete all as specified and directed.

M&L for formwork to chajjas including edges flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats and similar works exc 10cm & not exc. 20cm wide with rough finished surfaces etc complete all as specified and directed.

M&L for brick work with fly ash brick, old size, curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan to any redius built in half brick thick wall built in cm 1:4 (Using old size brick) complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick wall surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja mixed with water proofing compound @ 3% by the weight of cement or as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces & applying three coats of white wash complete all as specified and directed.

M&L for two coats of cement base paint, white or tinted on walls etc complete all as specified and directed.

M&L for 150mm thick PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) as in sub-base complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in base and similar works complete all as specified and directed.

M&L for damp proof course to horizontal or vertical surfaces including necssary form work in CM 1:2, 20mm thick with using water proofing compound @3% by weight of cement complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2, (using 20mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

Forming 12mm thick expansion joint with pre-formed filler and top 30mm primed and sealed with sealing compound Grade ‘A’ for thickness of concrete slab 50mm complete all as specified and directed.

Returning filling in including, spreading, levelling, watering and well ramming in layer not exc. 25 cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated materials not exc. 50m and depositing were directed at a level not exc 1.5 mtr above the staring point complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based AZ-150 corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based AZ-150 plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed the other, fitted with washer and one hexagonal or square nut not exc 5cm long and 10mm dia complete all as specified and directed.

S&F mild steel bolts exc 20 & not exc 25mm dia, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, not exc 30cm long complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 (Gde E-165) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F rolled mild steel section in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 410-S complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube opening as per drawing complete all as specified and directed.

S&F PVC factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with wood free EPS 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long butt hinges, aluminium anodised and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed.

S&F 200mm long aluminium handles, cast type, anodised complete all as specified and directed.

S&F steel ventilator, factory made with top hung shutter including hinges steel peg stay with glazing bars complete all as specified and directed.

S&F framed work such as grills, etc with ends of bars shouldered and or reiveted or forged into spikes, framed guard bars and similar work conforming to Fe-290-0 Gde-E-165 complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 15mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 46 above but 20mm bore complete all as specified and directed.

S&F galvansied tubes 25mm bore, medium grade with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply, Hoist and fixed in position rotational molded polyethylene water storage tanks (cylindrical with closed top) triple layer, antibacterial of capacity 500 ltrs complete all as specified and directed.

S&F 20mm dia PTMT float valve, high pressure with polythene float and flynut complete, screwed for iron pipe etc complete all as specified and directed.

S&F gun metal gate valve of 20mm dia with iron wheel screwed both ends for iron pipe complete all as specified and directed.

S&F vitreous china squating pan WC "Orissa pattern" of size 580 x 440mm, white with integral foot rest with ‘P’ or ‘S’ trap including provn of lime or concrete bedding complete all as specified and directed.

S&F EWC vitreous china wash down water closet (pedestal pattern) white with integral foot rests with 'P' or 'S' trap including provn of lime concrete or bedding complete all as specified and directed.

S&F plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P or aluminium hinging device complete all as specified and directed.

S&F health faucet CP with flexible tube and wall hook complete all as specified and directed.

S&F vitreous china half stall urinal with grating, union and spreader complete set with 40mm dia GI light grade waste pipe inclding brackets etc complete all as specified and directed.

S&F vitreous china W.H.B. white, flat back with pedestal of size 550 x 400mm, including CP waste coupling 32mm, waste pipe and brackets etc complete all as specified and directed.

S&F PVC low level flushing cistern, white, slimline, 10 ltrs capacity including PVC bend pipe, handle and float valve, brackets etc complete all as specified and directed.

S&F 15mm bore bib tap, fancy type, chromium plated long body cast copper alloy, screwed down for iron pipes or for brass ferrule complete all as specified and directed.

S&F 15mm bore angle stop valve, fancy type, chromium plated, cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm bore concealed stop valves, fancy type, chromium plated, cast copper alloy pressure with crutch or butter fly handles, screwed both ends with long shank and cup (concealed type) for iron pipe or for union complete all as specified and directed.

S&F 15mm bore pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

S&F chromium plated shower rose, fancy type, fixed to 15mm bore pipe complete all as specified and directed.

S&F low density polyethylene pipe connection with PTMT nuts suitable for 15mm bore GI pipe, 450mm long complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F cast iron floor trap with grating 100mm dia including jointing to waste pipe fixed in PCC 1:2:4 type B-I complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl ISI marked 110mm bore complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM (1:6) complete all as specified and directed.

M&L for coloured non skid ceramic jointless tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

All as per item No 74 above but size of tiles exc 0.06 sqm but not exc 0.11 sqm over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 10mm thick rendering with CM (1:4) on fair faces of brick work or concrete surface finishing rough for receiving wall tiles complete all as specified and directed.

M&L for glazed ceramic tiles colour 450x300x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded stone aggregate) as in roof, slabs supported on walls etc complete all as specified and directed.

M&L for form work to soffits of suspended slabs, such as roof slabs and similar work; not exc. 200mm thick for flat rough finished surfaces complete all as specified and directed.

M&L for SGSW drain pipes laid in trenches of 150mm internal diameter of pipe and jointed complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150mm bore pipe with cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for septic tanks, excavation in any type of soil, foundation in PCC, brick work in CM (1:4), RCC/CI manhole covers (HD), vent, shaft & sludge chamber etc complete for 100 users as per TD drawing complete all as specified and directed.

M&L for soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey comb & solid brick masonry in CM 1:3, RCC cover slab filling with brick bat, size 2.40m dia x 3m depth as per TD drawing complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marking medium grade concealed in surface of wall / ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of size 1.50 sqmm pressed steel terminal modular boxes sunk on wall for mounting of switches switch sockets fan regulator etc including modular white cover plate suitable for mounting modular switches, sockets, fan regulator etc complete all as specified and making good to distrubed surfaces for one light point controlled by one, one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, cieling roses and holders shall be connected to common earth dolly.

All as per item No 85 above but one ceiling /exhaust/ wall mounted fan point controlled by one switch and regulator complete all as specified and directed.

S&F switch, modular type, single pole, one way, 6 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F ceiling rose, surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat part No LCTLN-20-CDL or equivalent in Philips / Luker.

S&F highly durable surface mounted 09/10 watts LED batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat part No LCTLN-10-CDL or equivalent in Philips / Luker.

S&F LED light fitting bulk head luminaries 9W with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable of suitable size of 230V, 50Hz complete all as specified and directed. Make:- CG Cat part No LBHP-10-CDL or equivalent in Philips / Luker.

S&F building security light in repairs LED 25W with lumen o/p 1800 with driver with rated volatge 240 V, 50Hz, including mounting GI (made out of 25mm dia light grade pipe 1.2 m bent to shape) including FI clamps, nut bolts etc complete all as specified and directed. Make:- CG Cat no LSTS-25-CDL or equivalent in Philips/ Luker.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB single pole and neutral 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F exhaust fan, single phase, 200/230mm sweep, 230V, 50Hz, metallic with bolts, nuts, washers and connected electrically complete all as specified and as directed.

M&L for earthing complete with galvanised steet earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminium lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe upto 7.50 metre long for protection of earthing lead. (f) Reguisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade, laid in trenches, passing through pipes/ducts including testing of cross sectional area 2 core 10 sqmm complete all as specified and directed.

S&F double wall corrugated high dencity polymer ethyl (HDEP) pipe for laying of electric cable of size 50mm outer dia and 38mm inner dia with IS-14930 (Part 2) 2001 and 6mm thickness, laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Cutting of existing pipe line of any size and threading / making hole for branch connection and dewatering work as required and removing from site complete all as specified and directed.

Supply and laid in trenches 25mm bore GI tubing, medium grade with all fittings complete all as specified and directed.

S&F in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 25mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Exacavation over area not exc 1.50m deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches 1.5 mtr wide and exc 1.5m in depth and not exc 3.0m and getting out in soft/ loose soil complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for RCC 1:1 1/2:3, type A1 (Nominal mix) as in foundation, filling including raft footing, plinth beams and bases of columns complete all as specified and directed.

M&L for RCC 1:1 1/2:3, type A1 (Nominal mix) as in columns, pillar, post and struts complete all as specified and directed.

M&L for RCC 1:1 1/2:3, type A1 (Nominal mix) as in beams, cantilivers, bressumers and lintel over 1.5m span complete all as specified and directed.

M&L for RCC 1:1 1/2:3, type A1 (Nominal mix) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick wall surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.

S&F 100mm long mild steel medium weight cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F extruded alloy handles, fabricated type, anodised of 125mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specified and directed.

S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F towel rail 20mm dia of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

S&F waste fittings 32mm, brass chromium plated for glazed ware sink, basins, etc with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F PVC (SWR) pipes of 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) as in sub-base complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-2, (using 20mm graded stone aggregate) as in hard standing, PCC, path and similar works finished even and smooth without using extra cement complete all as specified and directed.

M&L for 50mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) for floor complete all as specified and directed.

S&F vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

M/s M.G. Hargunani

khushal constructions

Bidder Name

khushal constructions

Devika Constructions

M/s M.G. Hargunani