C/O Effluent treatment plant for various buildings at IGMC Shimla. (SH - Construction of Chamber tanks, ETP sheet and Providing and laying PVC pipe for sewerage etc. in Block A to C and Bldg. No. 14 and Providing and fixing Mechanical, Electrical etc

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within carriage of material in all leads and lifts:- All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand): 10graded stone aggregate 40mm nominal size) including carriage of materials within all leads and lifts:- All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads and lifts

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size) complete including carriage of materials within all leads and lifts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars. including carriage of materials within all leads and lifts

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of materials within all leads and lifts

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of materials within all leads and lifts

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) complete including carriage of materials within all leads and lifts:-second Class deodar wood.

Providing and fixing 35mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows Including black enamelled iron butt hinges with necessary screws etc. complete including carriage of materials within all leads and lifts in 2nd class deodar wood.

Providing and fixing 250mm x1 6mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts:- (i)150mm x10mm size.

100mm x10mm size

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts:- (i) 125mm size.

100mm size.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of materials within all leads and lifts.

Providing and laying 40mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63mm thick with zinc coating not less than 275gm/ m² including carriage of materials upto all leads and lifts and as directed by the Engineer in Charge.

15mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:6 (1Cement:6 Sand) including carriage of materials within all leads and lifts.

15mm cement plaster in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including carriage of materials within all leads and lifts :-Cement mortar 1:6 (1 cement : 6 sand)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50grams/litre complete including carriage of materials upto all leads and lifts and as directed by the Engineer in Charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work complete including carriage of materials upto all leads and lifts and as directed by the Engineer in Charge.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work complete including carriage of materials upto all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing high pressure PVC (finolex) Type-A spigot and socket, waste and ventilating pipes ISI marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts:- 110mm nominal size.

150mm nominal size

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size.

150mm nominal size

Providing and fixing PVC (Finolex) single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size.

150mm nominal size

Providing and fixing PVC (Finolex) door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete. including carriage of materials within all leads and lifts:- 110mm dia.

150mm dia.

Providing and fixing PVC (finolex) Plain bends of required degree (any radius) including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 110mm nominal size.

150mm nominal size.

Providing and fixing PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size.

150mm nominal size.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600mm x 450mm internal dimensions complete including carriage of materials within all leads and lifts.

Providing and fixing Effluent transfarmer pump MOC-stainless steel submerge make KSB/ crompton capacity 6m3/hr complete including carriage of materials within all leads and lifts.

Providing and fixing lime, Alum, Polly and chlorine dosing tank capacity 100lts/MOC-LDPE complete including carriage of materials within all leads and lifts.

Providing and fixing Chemical dosing pump capacity 0-10LPH make-E-Dose/Initative complete including carriage of materials within all leads and lifts.

Providing and fixing slow speed agitators, Induction motor-1 HP motor, 440v,1450RPM gear make classic ss304 shaftm worm gear, MS stand etc. complete including carriage of materials within all leads and lifts.

Providing and fixing sluge transfer pump capacity -1.50m3/ hour @10mtr head make kirloskar/willo model-SPOM complete including carriage of materials within all leads and lifts.

Providing and fixing Roots blower (compressor) capacity =100m3 hour motor 3.00 HP, RPM=1440, blower make= NGI motor= kiloskar complete including carriage of materials within all leads and lifts.

Providing and fixing presser sand filter dia 500mm/ HDS-1500mm frontal pipe line MOC-MSED filter media- gravel pebbles, sand silica sand complete including carriage of materials within all leads and lifts.

Providing and fixing activated carbon filler , filteration velocity-15m3/hr/m2 dia-500/HOS-1500mm, MOC-MSEP frontal pipe line carbon media-pebbles and activated carbon complete including carriage of materials within all leads and lifts.

Providing and fixing interconnetibg piping work (with ETP plant room) MDC-Submerge/ non submerge in UPVC/ all air MS "C" class size 15mm-80mm make Astral/ Jindal complete including carriage of materials within all leads and lifts.

Providing and fixing Electrical control panel make DOL starter fpr all drive, overhead relays, single phase preventer, timers etc. complete including carriage of materials within all leads and lifts.

Providing and fixing P.H. monitoring system make Alster/ equiv rang PH-9 complete including carriage of materials within all leads and lifts.

Providing and fixing Electro magnetic flow metre size 50mm complete including carriage of materials within all leads and lifts.

Providing and fixing membrane/ fine buble diffuser in aeration tank complete including carriage of materials within all leads and lifts.

Providing and fixing floating media/ biopack media complete including carriage of materials within all leads and lifts.

Providing and fixing Tube duck media complete including carriage of materials within all leads and lifts.

Providing and fixing ereaction and commissioning for cir line, diffusers and tube deck media complete including carriage of materials within all leads and lifts.

Providing and fixing filter feed pump size 40mm X 40mm, motor 2.00 H.P. RPM= 2880 make- Kirloskar/ cromption complete including carriage of materials within all leads and lifts.

Mohmad Kamran

FURKAN AHEMED