Sinking of Borewell and providing irrigation facilities to ST farmers Belluru Hobli 1)Lakshamma w/o Papanayaka, Dummasandra village 2)Lakshmamma w/o Nanjanayaka, Marutipura village 3)Yashodhamma w/o Vairamudi, Koppa Hobli,Tarikere village 4)Puttaswamy S/o Timmashetty, Honakere Hobli,Kanchahalli village of Nagamangala Constituency Mandya District

Sinking of Borewell and providing irrigation facilities to ST farmers Belluru Hobli 1)Lakshamma w/o Papanayaka, Dummasandra village 2)Lakshmamma w/o Nanjanayaka, Marutipura village 3)Yashodhamma w/o Vairamudi, Koppa Hobli,Tarikere village 4)Puttaswamy S/o Timmashetty, Honakere Hobli,Kanchahalli village of Nagamangala Constituency Mandya District

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)....

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments- 1x3x4 S...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Supply installing testing and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Vol...

Fabricating supplying and mounting MS box made out SWG suitable for floor or wall mounting fully weather proof with provision for better heat dissipation provided with hinged front cover equiped with...

Supply and fixing angle iron frame work fabricated out of MS angle and MS flat with bolt washers etc, and painted with two coats of red oxide and then two coats of approved paint etc. complete 40x40...

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239 part-II 1991 with latest amendments if any for 50mm dia

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments of size 50mm

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...