REPAIR MAINT OF STREET LIGHTS HIGHMAST LIGHT SYSTEMS SECURITY LIGHT AND PERIMETER LIGHT SYSTEM AND OTHER CONNECTED WORKS IN DOMESTIC MARRIED ACCN AREA AND IN TRAINING AREA AT INS CHILKA UNDER GE CHILKA

Amount

Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying of under ground cable in soft / loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for natural river sand as cushioning of cables including spreading and punning down complete all as specified and as directed. Note :- Punned thickness shall be measured for payment purpose

Supply and laying un-reinforced precast concrete cable cover,class HV ,Type -1,flat,size 250mmx150mmx40mm , laid in trenches as cable protection complete all as specified and as directed.

M&L for cutting existing road or PCC drain for taking out or laying of underground cable including necessary excavation and earth work and making good by filling earth and 150 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate at top layer complete all as specified and as directed.

M&L for 50mm dia bore galvanised iron light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

Taking down or out existing cable of sizes 2/4 core 10 to 16 sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and removing unserviceable cable for further disposal complete all as specified and as directed.

Laying only serviceable cable obtained from taking out in same or new location or in other location of size 2/4 core 10 to 16 sqmm including necessary cable lugs, gland etc complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

M&L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 10/16sqmm x 4 core cables including testing complete all as specified and as directed. Make :- Densons / 3M / Raychem

S&F in replacement street light bracket fabricated from 40mm dia medium grade GI pipe bent to shape not exceeding 1.5 M long alongwith 2 Nos flat iron clamps of size 25 x 4mm flat iron including nuts, bolts and washers suitable for fixing on poles including applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and as directed. Make of GI pipe :- Tata/Jindal/Prakash Surya

S&F in replacement of clamps suitable for fixing street light on pole fabricated from 32mmx6mm flat iron including nuts, bolts and washers suitable for fixing on poles including applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and as directed.

S&F in replacement of 20 mm dia rigid non metallic PVC Conduit inclusive of all tee, bends,reducers, bell mouth tube ends and fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

S&F in replacement 20 Watt LED decorative post top light fitting of aesthetically designed with symmetrical light distribution, IP 65 Rating 240V, 50 HZ, AC supply and with all accessories as required complete all as specified and as directed. Make :- Crompton Greaves Cat No. LPTH-20-CDL or equivalent in Philips / Havells

S&F in replacement post top lantern fitting of 40 Watts LED, post-top lantern, aesthetically designed with symmetrical light distribution, IP-65 with all accessories as required complete all as specified and as directed. Make :- Crompton Greaves Cat No LPTM - 40-CDL or equivalent in Philips / Havells

S&F in replacement of 60 Watts LED Street light made up of pressure die cast housing with toughned glass, IP 66 protection and impact resistance of IK07 with symmetrical light distribution and with all accessories as required complete all as specified and as directed. Make :- Crompton greaves Cat part No. LSTP-60-CDL or Havells Cat Part No ENDURAPEARLPLUSSL60WLED757SASYTOPC

S&F in replacement of 45 Watts LED,Street light made up of pressure die cast housing with toughned glass, IP66 protection and impact resistance of IK07 with symmetrical light distribution all accessories complete all as specified and as directed. Make :- Crompton Greaves Cat part No. LSTS-45-CDL-1 or Havells Cat Part No ENDURAPEARLNEOSL45WLED757SASYTOPC

S&F in replacement 150W LED flood light of die-cast aluminium body, IP66 including all accessories as required complete all as specified and as directed . Make :- Crompton Greaves Cat Part No: LFLN-150-CDL /60 or Havells Cat Part No JETAPROPLUSFL150WLED757PLTG

S&F in replacement of 250 W LED flood light of die-cast aluminium body, IP66 protection, heat resistant toughened clear glass cover with reflector and all accessories complete with all accessories as required complete all as specified and as directed . Make :- Crompton Greaves Cat Part No: LSFO-250-CDL/60 or equivalent in Philips/ Havells

Supply & erection of prestressed concrete pole 7.5 M long,102mmX152 mm at top and 102mmx281 at bottom, class-11 including painting with two coats weather proof acrylic paint over a coat of primer and marking the poles with zebra pattern of yellow and black strips with two rows of each colour with each strip of 6 cm height starting from pole coping, writing of pole number in black paint on yellow background of 100 mm dia circle including taking down old damaged pole by excavation & breaking of the PCC foundation and coping, disconnecting the existing cables, securing the live ends of the cables and wires with tape and reconnecting the old cable or new cable in the terminal boxes and fittings complete all as specified and as directed. Make : Orissa Concerete poles/Baba Loknath Concerete poles Note:- (i) Cost of Excavation and earth work is deemed to be included in the unit rate quoted. (ii) PCC shall be measured and paid seperately.

S&F of street light terminal boxes made out with SMC material, shock & dust proof of inside size 295x195x100mm as per IS and including 100Amp, TPN busbar fixed on insulators, 01 No 10Amp, SP MCB, earth termination with nuts & bolts and including 02 sets of flat iron 25x6mm clamps of suitable size with nuts, bolts and washers including two coats of aluminium paint over a coat of primer on exposed steel surfaces complete all as specified and as directed.

S&F in replacement of 100 Amps street light power contactor 3 pole, current rating AC3-80A, AC1-100A, 415V, 50 Hz with inbuilt auxilary contactor as required including necessary internal wiring complete all as specified and as directed. Make :- L&T MNX 80 Cat Part No CS97077 or equivalent in Legrand/Schnider/ABB

S&F in replacement of 160 Amps street light power contactor 3 pole, current rating AC3-110A, AC1-160A, 415V, 50 Hz with inbuilt auxilary contactor as required including necessary internal wiring complete all as specified and as directed Make :- L&T MNX 110 Cat Part No CS94137 or equivalent in Legrand/Schnider/ABB

S&F in replacement of of 1.5 sqmm 3 core PVC insulated flexible copper conductor wire from street light to terminal box drawn through MS pipe/PVC conduit or as indicated in other locations complete all as specified and as directed.

S&F in replacement of 14/15 W LED bulb complete all as specified and as directed. Make :- Crompton Greaves / Havells /Philips

Repairs to street light fitting any type, solar or conventional type in situ by checking for any loose connections, jointing of wires, replacement of LED drivers and its settings, checking for earth continuity and testing complete all as specified and as directed.

M&L plain cement concerete 1:4:8, type D-2 using 40mm graded stone aggreegates as in foundation filling and mass concrete for pole etc complete all as specified and as directed.

M&L for greasing of motors, harnessing wires of 16 M for high mast light poles at site complete all as specified and as directed .

M&L for refilling distilled water in Solar Street Light batteries complete all as specified and as directed. Make :- Exide or equivalent as approved

S&F in replacement of MH lamp 250 Watt, single ended tubular type complete all as specified and as directed . Make :- Crompton Greaves/Havells/Bajaj

S&F in replacement of MH lamp 400 Watt, single ended tubular type complete all as specified and as directed. Make :- Crompton Greaves/Havells/Bajaj

S&F in replacement of copper ballast suitable for 250 Watt MH light fitting, open construction, heavy duty VPIT complete all as specified and as directed . Make :- Crompton Greaves/Havells/Bajaj

S&F in replacement of copper ballast suitable for 400 Watt MH light fitting, open construction, heavy duty VPIT complete all as specified and as directed . Make :- Crompton Greaves/Havells/Bajaj

S&F in replacement of electronic igniter suitable for 250 to 400 Watt MH light fittings complete all as specified and as directed . Make : Crompton Greaves/Havells/Bajaj

S&F in replacement of electronic driver suitable for LED street light fittings of capacity 45 Watt complete all as specified and as directed. Make :-Crompton Greaves/Havells/Bajaj/C&S Electric Ltd

S&F in replacementof electronic driver suitable for LED street light fittings of capacity 60 Watt complete all as specified and as directed. Make :- Crompton Greaves/Havells/Bajaj/C&S Electric Ltd

S&F in replacement of electronic driver suitable for LED street light fittings of capacity 150 Watt complete all as specified and as directed. Make : -Crompton Greaves/Havells/Bajaj/C&S Electric Ltd

S&F in replacement of MCB, SP,5 to 32 Amp,240 V,10 KA complete all as specified and as directed . Make :- Havells/L&T/C&S Electric Ltd

MCC MECHANICAL AND ENGINEERING CORPORATION

M/s R J TRADING CO

PRASANTA KUMAR PANDA