Renovation Work of Palkhi Thamba At Pangri,Pandhurly,Sinnar (Musalgaon MIDC) Tal. Sinnar and Yesgaon Tal. Kopargaon for Shree Saibaba Sansthan Trust, Shirdi.

Amount

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing cement tiles,or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete

Providing dry / trap / granite /quartzite /gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. I. NO 21.38

Providing and laying Cast in situ / Ready Mix cement concrete in M- 10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water ,Steel centering formwork, laying /pumping, compacting ,roughening them ifs pecial finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) ITEM. NO 24.01

Providing sandfaced plaster externally in cement mortar using approved screened sand,in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sandfaced treatment 6 to 8mm thickin cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Page No.257.Item No 32.11

Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing, mouldingedges,polishingand cleaning etc. complete.

Providing and laying Antiskid Ceramic tiles of approved quality of size30cmx30 cm and confirming to IS15622-2006 (Group-BIIA) for antiskid flooring in required position laid on a bed of1:4 cement mortar including cement float,filling joint with cement slurry cleaning curing etc. complete.

Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainlesssteel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. ITEM NO 39.1

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 Kilogram / sq.m. ). ITEM NO 38.04

Providing and applying priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. ITEM NO 35.21

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete . ITEM NO 36.12

Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings,including scaffolding if necessary,cleaning and preparing the surface (excluding primer coat) etc. complete.ITEM NO 35.07

Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding,ifnecessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and applying priming coat over new /old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool,scrappers and sand paper, scaffolding etc.complete item no 35.2

Providing and applying two coats of synthetic enamel paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.ITEM NO 35.07

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary ITEM NO 35.26

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling ,ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means I. NO 21.01

Providing dry / trap / granite /quartzite /gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. I. NO 21.38

Providing and laying Cast in situ / Ready Mix cement concrete in M- 10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water ,Steel centering formwork, laying /pumping, compacting ,roughening them ifs pecial finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) ITEM. NO 24.01

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Page No.242.Item No 27.05

Providing sandfaced plaster externally in cement mortar using approved screened sand,in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sandfaced treatment 6 to 8mm thickin cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Page No.257.Item No 32.11

Providing sill sof polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing, mouldingedges,polishingand cleaning etc. complete.

Providing and laying vitrified rustic matt stone finish tile s having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thickness and confirming to IS. 15622-2006 (GroupBla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4 cement mortar including neat cement float, filling joints, curingand cleaning etc. complete.item no 33.44

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10 mm thickness and confirming to IS.15622-2006 (Group Bla ) of approved make,shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete. item no 33.45

Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles, top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30x100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on eitherside, and 15mm (5mmx3) thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10mm thick prelam PVC sheet to be fitted in the M.S .frame welded /sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on eitherside, andjoined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20 mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive.including stainless steel fixture sand fastening Complete as per direction of Engineer incharge,manufacturer's specification and drawing.

Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainlesssteel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. ITEM NO 39.1

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 Kilogram / sq.m. ). ITEM NO 38.04

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary ITEM NO 35.26

Providing and applying priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. ITEM NO 35.21

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete . ITEM NO 36.12

Providing and applying two coats of synthetic enamel paint of approved colour to new / old structural steel work and wood work inbuildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. ITEM NO 35.07

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing cement tiles,or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete

Providing dry / trap / granite /quartzite /gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. I. NO 21.38

Providing and laying Cast in situ / Ready Mix cement concrete in M- 10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water ,Steel centering formwork, laying /pumping, compacting ,roughening them ifs pecial finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) ITEM. NO 24.01

Providing sandfaced plaster externally in cement mortar using approved screened sand,in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sandfaced treatment 6 to 8mm thickin cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Page No.257.Item No 32.11

Providing sill sof polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing, mouldingedges,polishingand cleaning etc. complete.

Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainlesssteel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. ITEM NO 39.1

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 Kilogram / sq.m. ). ITEM NO 38.04

Providing and applying priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. ITEM NO 35.21

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete . ITEM NO 36.12

Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings,including scaffolding if necessary,cleaning and preparing the surface (excluding primer coat) etc. complete.ITEM NO 35.07

Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding,ifnecessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and applying priming coat over new /old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool,scrappers and sand paper, scaffolding etc.complete item no 35.2

Providing and applying two coats of synthetic enamel paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.ITEM NO 35.07

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary ITEM NO 35.26

Removing W.C.pans including disconnecting the sanitary and water supply connections,removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials as adnwhere directed including throwing the unserviceable materiasls outside etc.carefully and throwingout the refusal outside etc. complete. item no 46.41

Removing brick bat coba including stacking the spoils as directed with all leads,lifts etc, complete. Item no 46.14

Removing plaster including disposing of the spoils as directed with all leads,lifts etc, complete. Item no 46.23

Providing and fixing Orissa type white glazed earthen ware 575 mm watercloset pan including S trap with earthen ware foot rests, cast iron soil and vent pipe upto out side face of the wall 1:2:4 brickbat lime concrete bedding without flushing tank and it saccessories etc. complete. Item no 42.30

Providing waterproofing in W.C. and bath including brickbat coba in all positio nincluding providing and laying 12 mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram / per bag of cement laying brickbat coba of required thickness in cm 1:5 with waterproofing compound 1Kilogram / bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1Kilogram / per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. item no 31.26

Providing and fixing chicken mesh of 22 gauge, with about 30cm. Width at the junction of R.C.C members and brickwork, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B. masonry and or tying by binding wire etc. complete.

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. Complete item no 32.06

Providing andapplying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface /or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. ite no 32.31

Providing sandfaced plaster externally in cement mortar using approved screened sand,in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sandfaced treatment 6 to 8mm thickin cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Page No.257.Item No 32.11

Providing and laying matt finish ceramic tiles of having size 30 cmx30 cm confirming to I.S.15622 /2006 (group DII-A) and 7 to 8 mm thick for flooring in required position laid on a bed of1:4 cement mortar including cement float, filling joint with white / colour cement slurry cleaning curing etc. complete. ITEM NO 33.24

Providing and applying priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. ITEM NO 35.21

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete . ITEM NO 36.12

Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings,including scaffolding if necessary,cleaning and preparing the surface (excluding primer coat) etc. complete.ITEM NO 35.07

Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding,ifnecessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Item no 35.09

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary ITEM NO 35.26

Matoshree interiors (BID ID -6510345)

Kaustubh Dinesh Kulkarni (BID ID -6513659)

PAVAN DNYANDEO NALE (BID ID -6513595)