Construction of New Rural Police Station building with development works at Pudupettai in Cuddalore District.

Amount

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

b. 2 to 3 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

b. 2 to 3 mt.

E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0040) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0013) Supply and filling in foundation and basement with gravel

CSMP0002) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

CSMP0003) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

CSMP0004) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

CS0011) Providing Cuddappah slab of 40mm thick finishing with two sides for cupboard, sunshade, ward-robes, shelves, side slabs of boxing around windows, kitchen platform slabs, sink and other similar works including finishing and fixing in position complying with relevant Standard specifications etc., complete in the following floors (Measurement will be taken including bearing also) as directed by the departmental officers (Quality of Cuddappah slab shall be got approved by the Executive Engineer before fixing. Cuddappah sunshade shall be provided with cuddppah beeding of required size to prevent rain water in the rooms without any extra cost) II. 40mm thick a) In Ground Floor

b) In First Floor

c) In Second Floor

C0066) Providing and laying in position, Standardised Concrete Mix M-25 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

C0020) Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete Providing Pit

C0020.a) Augering 30cm dia

CSMP0001) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag)

BMP0011) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

BMP0012) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

BMP0013) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

BMP0014) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Stilt / Ground floor

b) In First Floor

c) In Second Floor

BMP0010) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors a. In Ground floor

b) In First Floor

FL0003) Supplying and fixing of 20mm thick Bituminous Expansion joint filler Pad

FL0115) Supplying and laying of Rubber molded hydraulic pressed Paver blocks following thick using stone dust with required design & color including cost, conveyance of paver block and labour charges for laying with proper slope and gradient etc. complete and as directed by departmental officer (The brand, quality & color should be got approved from the Executive Engineer before use) b. 83mm thick Paver block

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0010) Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0017) Supplying and laying of Sinthetic Grey, Paradise and similar varieties Granite slabs (superfine polished with machine cut edges) of size 4'-0"x 2'-0" of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

e) For Circular Column

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004) Plastering in CM 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

PLMP0005) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PL0027) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0027) Providing wooden (melamine) polish for new wood

PA0032) Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0042) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame with shutter

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0042) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JW0044) Supply and fixing of UPVC Sliding Window (Two track)

JD0098) Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 2Nos of 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the Brass furniture fittings such as 2 nos of 6" door handle with brass screws, 6 nos of 5" Butt hinges, 4nos 6"x1/2" Tower bolt, 1no 10"x5/8" aldrop, 2nos Nylon bush and 2 nos door stopper of best approved quality shade etc., all complete and as directed by the departmental officers. a) 1800 x 2100mm (Double Leaves)

JD0027) Supplying and fixing of T.W. single leaf Door shutters using 9 mm tk. phynol bonded BWR plywood shutters with brass screws a) 750 x 2100 mm

JD0059) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size a) 750 x 2100 mm

JD0086) Supply and Fixing of MS Door (for lockup door) a) MS Door of Size 1000 X 2100mm

JV0014) Supply and Fixing of MS ventilator of size (for lockup ) f) MS Ventilator of size 1350 X 600mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

JD0099) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood (For Rest room)

FLMP0018) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

SAMP0006) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete and as directed by the departmental officers.

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SAMP0004) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SAMP0005) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag)

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

SA0113) Supply and fixing of 10 litre capacity Handle type PVC low level flushing tank (cistern - wall mounting type) of superior variety (white) with all fittings

MS0002) Supplying and fixing of 20mm dia aluminium hanger rods

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

EL0002) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type socket with switch

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0085) Supplying and fixing of 225mm dia sweep AC exhaust fan of approved ISI quality

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) a. 9 watts LED bulb

b. 12 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0100.d) Supply and fixing of 150W LED street light fitting with LED(Lower end) with 40mmdia.GI pipe (class B) with 1no.40mm GI bend complete on the existing post /onwall with PVC unsheathed copper leads with MS clamps and with painting.

EL0380) Supply and erection of 200 Amps capacity floor mounting metering panel board (Cubical type) with bus bar chamber made up of 16 / 14 SWG MS sheet for 3 phase 4 wire system with 25mm x 6mm tin coated copper flats for phases and 25mm x 3mm for neutral cable chamber, switch chamber and with 2 Nos. 25mm x 3mm tinned copper flat for the earth bus on the rear side of the panel board, necessary interconnections by copper flat of suitable sizes, suitable PVC colour sleeves for the interconnecting copper flats / rigid copper wire, earth connections to all switches / bus bar by copper flats of suitable sizes from the earth bus, hylem sheet separation between bus bar and switches, 1 set LED pilot lamps with switches, fuse units, suitable angle iron frame of size 40mm x 40mm x 6mm with painting in two coats of suitable colour over one coat of red oxide and with numbering, superscription of cables sizes, capacity of switches etc all complete complying with relevant standard specifications and as directed by the departmental officers.

EL0169) Supply and fixing of 32 Amps Double pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection, cost of all materials etc., all complete as directed by the departmental officers. (The quality should be got approved by the Executive Engineer before use).

EL0171) Supplying and fixing of 1 no three phase distribution board with 6 way per phase 30A / per way with neutral link on suitable well varnished teakwood plank including necessary inter connections and earth connections cost of all materials etc., all complete.

EL0186) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0203) Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0227) Supplying and fixing of 3 Nos.of 63 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete and as directed by the departmental officers.

EL0231) Supply and fixing of 63 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection and earth connection cost of all materials etc., all complete and as directed by the departmental officers.

EL0237) S & F of 450 x 375 x 20mm thick TW plank

EL0292) Supplying and delivery of following dia GI Pipe of approved ISI quality including cutting, threading, and jointing, conveying & labour charges for fixing wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., all complete and as directed by the departmental officers. (The pipe quality & brand should be got approved from the EE before use) c) 80 mm dia GI pipe

EL0294) Supply and laying of B class following dia G.I.pipe of best approved quality with ISI mark below G.L for drawl of cable with necessary earth work excavation in all soils and subsoils and refilling the trenchs with excavated earth, consolidation etc., all complete complying with relavent standard specification and as directed by the departmental officer (The brand and quality of GI pipe should be got approved from the EE before use) c) 80 mm dia GI pipe

EL0597) Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

EL0174) Supplying and laying of 8 SWG GI wire

EL0337) Supplying and delivery of following PVC aluminium armoured LTUG cable h) 3.5 core 50 Sqmm PVC aluminium armoured LTUG cable

EL0342) Supplying and delivery of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable h) 3.5 core 50 Sqmm Brass cable gland

EL0358) Supplying and fixing of cable end termination for following PVC / XLPE LTUG Aluminium armoured cable etc all complete and as directed by the departmental officers. a) 3.5 c x 50 sqmm PVC / XLPE LTUG armoured cable

EL0434) Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

GR0053) Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., all complete and as directed by the departmental officers. (the quality and the brand of material should be got approved by the executive engineer before use)

GR0056) Supplying & fixing of Stainless steel Hand Rails for Staircase (304 L Grade)

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements b) 600mm x 600mm

NL0006) Supplying and fixing of following size aluminium die casting lettering and numbering with approved coloured powder coated in matt finishing including drawing model letters on the paper, preparing the design, moulding, casting, filing, colouring to the requirement by spraying the paint, transporting to site and labour for scaffolding drilling and fixing the letters by using projected rod fevicol quick fix and cement slurry and redoing the damaged area and colouring etc all complete and as directed by the departmental officers. (the design should be got approved from the executive engineer before moulding) a) 9" dia aluminium dye casting letters

b) 12" dia aluminium dye casting letters

NL0005) Supplying and fixing in position of following size aluminium diecasting TNPHC Logo / Emblem with approved coloured powder coated in matt finishing including drawing model letters on the paper, preparing the design, moulding, casting, filing, colouring to the requirement by spraying the paint, transporting to site and labour for scaffolding drilling and fixing the letters by using projected rod fevicol quick fix and cement slurry and redoing the damaged area and colouring etc., all complete and as directed by the departmental officers. (the design should be got approved from the executive engineer before moulding) a) 15" height

NL0007) Supplying and fixing of following size plastic foam plate of 3mm thick with 3' height vinyl cutting numbers with approved colours etc., complete and as directed by the departmental officers. (The quality of the material should be got approved from Executive Engineer before use) c) 24'' x 8" Plastic Foam Plate

MS0059) Supplying and delivery of following God - rej novtal lock including all cost of lock and labour charges etc., all complete and as directed by the departmental officers. a) 6 Lever with 3 keys

WS0258) Drilling the bore well 165mm of dia and anywhere including transportion from one place to another with in Tamil nadu in alluvial soil sedimentary strata of sand stone shale pebble boulders etc by first taking a pilot bore of 140mm/150mm dia and then on laying to required dia direct or reverse rotary method circulation method using rotary rings and labour and drilling at site including all charges as per the direction by the departmental officers. a) From 0 mtr and upto 100 mtrs below GL

b) From 101 mtrs upto 210 mtrs depth below GL

WS0200) Reaming from 140/150mmm pilot bore to 300 mm dia bore as directed by the departmental officers a) Upto 60 mtrs depth below GL

b) From 61 mtrs upto 90 mtrs depth below GL

c) From 91 mtrs upto 120 mtrs depth below GL

d) From 121 mtrs upto 150 mtrs depth below GL

e) From 151 mtrs upto 180 mtrs depth below GL

f) From 181 mtrs upto 210 mtrs depth below GL

WS0150) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., a) 150mm dia casing pipes assembly

WS0152) Supply and delivery of the following dia PVC heavy duty casing pipes and necessary special of best approved quality etc complete. d) 165 mm dia outer PVC Plain pipes

e) 165 mm dia outer PVC slotted pipes

WS0261.c) 165 mm dia outer PVC bottom dummy

WS0210) Labour charges for developing the bore by air compressor of capacity 600 cfn. Using drill rods/holes with required size pipes for various capacity compressor including transportion, labour charges and fuel charges for air compressor as directed by the departmental officers.

WS0011) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM-D-1785 of schedule 40 including cost of materials and labour charges for earth work excavation, laying, jointing and cost of conveyance charges with necessary specials etc., all complete and as directed by the departmental officers. (Below Ground level). a) 50mm dia PVC pipe

WS0018.III) Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer (The brand and quality of the GI pipe should be got approved from EE before use). a) 80mm GI bend

SA0184) Supplying and fixing of C.P. shower with shower arm 9" long of best approved quality with ISI mark including cost of all materials, labour charges for fixing etc., all complete complying with relevant standard specifications and as directed by the departmental officers. (The C.P. shower with shower arm shall be got approved from the E.E. before fixing)

SA0139) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specification including cost and labour charges for fixing etc., complete complying with relevant standard specifications and as directed by the departmental officers (The brand and quality of the materials should be got approved from the Executive Engineer before use) a) CP Shower Arm with Overhead Shower Rose

b) CP two way bip cock with health faucet

c) CP Angle Cock Tap

WS0278.o) THREE PHASE 5 HP SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type 5 HP submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % Motor : 5 HP, Total Head : 225m, Suction : 80mm, Delivery : 50mm, Discharge : 50x175lpm.

WS0266) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). For 5 HP Motor

WS0162) Labour charges for the erection of Submersible pumpset in borewell / openwell including fixing and jointing Submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cable and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days including signing of completion of reports as required by EB authorities etc., all complete and as directed by the departmental officers. Upto 5 HP

EL0349) Supply and delivery of 3 core 4 sq.mm flat type copper cable conforming to IS 694/1990, PVC insulated and sheathed cable for submersible motor etc., all complete and as directed by the departmental officers. (The materials should be got approved from the EE before use)

WS0235) supply and delivery of required dia nylon rope of superior quality for submersible pumpset in borewell and as directed by the departmental officers (the quality of nylon rope should be got approved by the executive engineer before supply)

WS0267) Supply of 50mm dia UPVC Column pipe threaded pipe approved quality with ISI mark etc., all complete and as directed by the departmental officers.

WS0281) Supplying & fixing of CPVC pipes confirming to IS 15778:2007 ASTM D-2846 standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, foundations and RCC slabs, making good the walls and bores in CC or CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors. a) 20mm dia CPVC pipe

WS0023) Supplying, laying, fixing and jointing the following UPVC pipes as per ASTM-D-1785 of schedule (Below Ground level) a) 50 mm PVC pipe. 10Kg/cm²

WS0280) Supplying and Delivery of following Dia UPVC Specials of best and approved quality having ISI mark a) 50 mm UPVC Ball valve

b) 50mm Dia UPVC Union

c) 50mm Dia UPVC Bend

d) 50mm Dia UPVC Elbow

e) 50mm x 40mm UPVC reducer

f) SS Adopter 50mm dia

WS0018.XIII.c) Supply and fixing of 150mm dia MS clamp sets of best approved quality with ISI mark

NW0071) Supplying, delivery, fixing and commissioning of Single phase Online UPS (Single phase IN and Single phase OUT) to a Capcity of 5.5KVA (inbuild with isolation transformer with 2 Hours Backup power, including the cost UPS and installation charges etc., all complete and as directed by the departmental officers. (The UPS got approved from the Executive Engineer before installation) (24 Months warranty)

NW0072) Supplying, delivery, fixing and commissioning of Online UPS EXIDE EP65-12 SMF Battery (24Months warranty) with ISI mark including the battry and installation charges etc all complete and as directed by the departmental officers.(The UPS got approved from the Executive Engineer before installation)

NW0073) Supplying and fixing in position of UPS & Battry Rack and inter link connection charges etc.,all complete and as directed by the departmental officers.

K.Saravanan (BID ID -1507615)

NACHATRA CONSTRUCTION (BID ID -1501529)

P SESHACHALAM (BID ID -1505423)