House Service Water Connection to 2164 nos. of Premises at Ward No 12, 13, 14, 15, 16, 17 and 18 upto private property line with 20mm OD HDPE (PE100, PN16) with necessary connection accessories including Water Meter and restoration of damages of road

Providing House Service connection from the existing CI/DI/UPVC/HDPE/GI/AC distribution pipeline by supply,fitting & fixing of 10 mm NB Brass Ferrule conforming to lS 2692:1989 with latest amendments on the said pipeline with supply, fitting & flxing of all other accessories like saddle piece of required size to fit the existing distribution pipeline, specials, nut & bolts, rubber sheet, washers etc and supply & laying of 20mm OD HDPE (PE100, PN16) pipe with all necessary specials 1.0 metre below (approx.) the ground connecting the ferrule/flow control valve including cutting trenches in all sorts of soil as well dismantling of any hard crust layer/concrete/masonry etc.(average. 0.3cum per connection) and filling up trenches as per direction of the Engineer-in-charge and upto a point just inside the premises of the household or as directed by ElC. Supply and installation of a 15mm dia. alloy iron Bib Cock (tested to 21 Kg/cm2) above 1.0 Mtr. from ground, an alloy Stop Cock of 15 mm dia. with brass spindle (tested to 21 Kg/cm2) to be fitted in a position as directed by E.l.C. G.l pipe of TATA make (medium duly) of 2 metre length with all necessary specials to continue from the end of the HDPE pipe & upto 1.0 m. above ground within the premises of household including Supply , Fitting and Fixing of Multi Jet Class- B domestic/commercial water metering system (size 15 mm) strictly conform to IS 779-1994 (with all amendements) or MID with AMR compatibility as per specification in the NIeB/NIeT with PE meter box and with NRV valve as specified as per direction of EIC along with periodcial meter reading and submission of reports as mentioned in the scope of work as well as per direction of EIC. Upto 10m length of HDPE pipe from the distribution pipe line Casing Pipe of 25mm dia (TATA MAKE GI PIPE MEDIUM DUTY) to be provided by the contractor for crossing of drain if any. All the damages made on the roads, the compound walls etc. for providing House service connection shall have to be restored by the Plain cement concrete (1:2:4) by the contractor as per direction of EIC. Any damages made on the floor / PCC / tiled / mosaic etc. shall be restored by the Contractor with Plain Cement Concrete (PCC 1:2:4) and neat cement finish as per direction of EIC. N.B.-GST will be applicable as per Govt.norms

Above 10m Upto 20m length of HDPE pipe from the distribution pipe line