DAY TO DAY MAINTENANCE AND REPAIRS TO INTERNAL ELECTRIC SUPPLY SUCH AS SWITCH BOARD SWITCHES MCB MCB DBs LED TUBE LIGHT FITTING CFL FTL BULK HEAD FITTING ELECTRIC GEYSER AIR CIRCULATORS CELLING FAN AT POWAI WORLI CGSD MALAD MANKHURD AND PANVEL UNDER

Amount

Taking down carefully copper/ aluminium point wiring (light ,fan ,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets ,light fittings etc. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc to match with the existing surface / location.all as directed.

M&L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed FRLS cable, ISI marked 1100 volts grade draw through and including rigid non metallic PVC casing and caping ( of suitable size) and all necessary fittings accessories fixed on walls/ceilng etc including 1.5 sqmm single core PVC insulated unsheathed cable (green colour) 1100 volts grade with multi stranded copper conductor earth continuity conductor to commom earth and connected to earth continuity conductor to common earth and connected to earth dolly terminated in and including sunk pressed steel terminal box for modular plate and including modular plate complete including cutting chases, refilling and making good to disturbed surfaces all as specified and as directed, for one light/fan/bell point controlled by one switch.

All as per item no. 2 here in beforbut for One three pin switch socket outlet 5 amps on same board.

All as per item no. 2 here in before but for One three pin switch socket outlet 5 amps on independent board.

All as per item no. 2 but for two way light point wiring controlled with two 2 way 5 amps switches

M&L for point wiring using proper colour coding complete all as specified with 1100 Volts grade, 2.5 Sqmm PVC insulated, FRLS, unsheathed, wire confirming to IS-694,PartII, ISI marked with Multistranded copper conductor in and including PVC casing caping (suitable size ) ISI marked ,with all accessaries on wall/ceiling/floor/ roof etc, sunk pressed steel terminal box not less than 2 mm thick, 50 mm deep, covered with 3 mm thick plastic laminated, ISI marked, sheet top cover fastened with chromium plated brass screw including 2.5 Sqmm, PVC insulated, FRLS, unsheathed, multistranded, copper conductor 1100 Volts grade, green colour, continuous earth wire connected to common earth doly for 15 Amps, 3 Pin, socket outlet independent all as specified and directed.

Supply and fix in repair LED tube light fitting 1X 20 Watt including LED light 20 watt, complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of 0.75 Sqmm size and PVC square block for fixing LED tube fitting complete all as specified and directed. Make:- Halonix Bajaj/Philips/ CG

Supply and fix in repair LED tube light fitting 1X 10 Watt including LED light 10 watt, complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of 0.75 Sqmm size and PVC square block for fixing LED tube fitting complete all as specified and directed. Make:- Halonix Bajaj/Philips/ CG

S & F modular socket 5 Amps 2 module,2/3 pin ISI marked, 240 Volts, all as specified and directed.

S & F modular socket 6/16 Amps and 2/3 pin, 2 modules ,ISI marked 240 Volt , complete all as specified and directed.

S & F modular switch, single pole, ISI marked ,one way 6 Amps 1 module 250 volts , complete all as specified and directed.

S & F modular switch 15 amps , ISI marked, flush type, multipurpose 1way ,I module , complete all as specified and directed.

S & F modular type fan regulator, 230 volts, ISI marked , stepped and flush type and connecting up complete all as specified and directed.

S&F in repair switch modular type ,5 amps, 2 ways, ISI marked, 250 volts , complete all as specified and directed.

S & F modular bell push , 1 module ,6 Amps , ISI marked, 250 volts , complete all as specified and directed. Make for item No:- 9 to 15 -Anchor Roma/ Crabtree/Legrand

S & F fan regulators ,230 volts, ISI marked, stepped and flush type and connecting up , complete all as specified and directed.

S&F Switch piano , flush type ,single pole, ISI marked ,one way 5 Amps ,230 volts , complete all as specified and directed.

S&F in repair bell push, flush button , single pole ,ISI marked, one way 5 Amps, 230 volts , complete all as specified and directed.

S&F in repair switch socket combination 2 in one, 5 Amps flush type ISI marked 240 Volt all as specified.

S&F in repair Socket 5 Amp flush type piano, 2 module , 3 pin flush type ISI marked 240 Volts all as specified and direcetd.

S&F in repair switch socket combination, ISI marked flush type, multipurpose 5/15 amps , controlled by one switch , complete all as specified and directed.

S&F in repair ceiling rose,3 phase/PVC/polycarbonate isolated body, ISI marked , complete all as specified and directed. Make for item No:- 16 to 21 Anchor/Legrand/Havells

S&F in repair bell ding dong AC 230 Volts, ISI marked single pole all as specified.

supply and fix new white cover modular plate with frame of 8 module alll as specified.Make for Item No-24 to 27 :- Anchor Roma/Crabtree/Legrand

Supply and fix new white cover modular plate with frame of 6 module all as specified.

Supply and fix new white cover modular plate with frame of 3 module all as specified.

Supply and fixing modular white cover plate with frame 4 module

supply and fix new white cover modular plate with frame of 12 module alll as specified.

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet suitable for 3 module white cover plate.

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet suitable for 4 module white cover plate.

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet suitable for 6 module white cover plate.

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet suitable for 8 module white cover plate.

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet suitable for 12 module white cover plate.

Taking down old unserviceable MCCB 63 amp and supply and fix new MCCB,415 volt,3 pole 16 KA capacity, 63 Amps, complete all as specified and directed. Make : Siemens /Havells /Legrand/L & T .

Supply & fix in repair MCB DP 40 Amps,10 KA, 240 volts complete all as specified and as directed.

Taking down old unserviceable MCB TPN 63 amp and supply and fix new MCB,TPN, 63 Amp, 415 Volt, 50 HZ, 10 KA, `C` Series, ISI marked, making electrical connection with the help of Lugs/thimbles all as speacified. Make :Havells/L&T/Siemens/Legrand .

Taking down old unserviceable MCB SPN 6-32 amp and supply and fix new MCB,SPN, 6-32 amp, 240 Volt, 50HZ, 10 KA, `C` Series, ISI marked making electrical connection with the help of Lugs/thimbles all as speacified. Make :Havells/L&T/Siemens/Legrand .

Taking down old unserviceable MCB SP 6-32 amp 240 volt and supply and fix new MCB,SP, 6-32 amp, 240 Volt, 50HZ, 10 KA, `C` Series, ISI marked making electrical connection with the help of Lugs/thimbles ,complte all as speacifiedand directed. Make :Havells/L&T/Siemens/Legrand .

S&F vertical TPN DB Box with MCCB Incomer, metal door, IP-43 , 6 Way with MCCB 150 Amps as incomer and remaining 18 modules as outgoing for mcb Sp, MCB SPN, MCB TPN, the DB box should be duly concealed inside the wall surface, this includes removal od old U/s MCCB Box and securing the rwmoved wiring connection with help of cable tie and lugs for serviciable MCB's or new MCB's complete in all respect along with making any disturbed surface good all as directed by engineer-in-charge. Note- Price for MCCB 150 Amps as incomer is deeemed to be inclusive in quoted rates.

Supply and fix in repairs MCB distribution board TPN 4 way , double door 415 volts duly painted with epoxy based powder coated painting suitable for mounting MCB TP/FP as incomer of rating upto 63Amps, FP and MCB SP /TP as outgoings complete with 200 amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection including removing old unserviceable item all as specified and as directed. Make :- Standard/ Legrand/Schneider/Havells/Siemens

Supply and fix in repairs MCB distribution board SPN 8 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate including removing old unserviceable item complete all as specified and as directed. Make :- Standard/ Legrand/Schneider/Havells/Siemens

Taking down old unservicable MCB, DB SPN 4 way and supply and fix new MCB, DB,SPN, 240 V double door, IP-42, 4 Way, ISI marked having earth terminal, Neutral bus terminal for 8 way circuits complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles all as speacified and directed. Make :- Standard/ Legrand/Schneider/Havells/Siemens

Material and labour for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable item complete all as specified and directed. Note : - 02 run of 6 sqmm single core copper conductor cable and 01 run of 4 sqmm single core copper conductor and 01 run of PVC casing and caping shall be measured as one unit.

Material and labour for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 2.5 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable itemcomplete all as specified and directed. Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit. Make - (i) copper cable:- Havells/Finolex/Plaza /Polycab (ii) PVC casing/caping:- Press fit/classic/precision/supreme

Taking down old unserviceable cable 3 core 2.5 sq mm and supply and fix new1100 volt grade cable PVC insulated 3 core 2.5 sq mm multistranded copper conductor , complete all as per specified and directed. Make : KEI/Havells/Polycab

Taking down old unserviceable cable 3 core 1.5 sq mm and supply and fix new1100 volt grade PVC insulated multistranded copper conductor , complete all as per specified and directed. Make : KEI/Havells/Polycab

S & F in repair slim surface mounted LED panel 2'x2' fitting aluminium die cast body with premium diffuser to ensure glare free and even distribution of light 36 watts LED, 6000K , including all necessary connections , complete all as specified and directed. Make : Havells / Halonix/ Bajaj / philips/Wipro.

Supply and fix LED post top lantern light fitting 40 watt made in die cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection complete with all accessories including fixing arrangement on boundary wall pillar by providing GI pipe top on surface of boundary wall of suitable size and length as per site requirement and making good the disturbed portion of compound wall to match with existing surface complete all as specified and directed. Make :- Halonix/ Havells/Philips/Bajaj/crompton

Taking down old unserviceable ceiling light fittings and supply and fix new LED Ceiling light fitting, recess mounting/surface mounting 36 watt, ISI marked,white powder coated CRCA housing with highpower LEDs, aluminium front frame with flat acrylic cover white high transmission with all connected accessories complete all as specified and directed. Make :Bajaj/Havells/Philips/Wipro

Taking down old U/S LED lamp holder and supply an fix in new lamp holder with angular meta ring with heavy duty brass contactsuitable for 9/12/15/20 watt LED bulbs complete all as specified and directed.

Taking down old U/S round type LED fittings and supply and fix in new LED round type light fitting 22 W, 240 V complete all as specified and directed.

Taking down old U/S Square8 x8 inch LED fittings and supply and fix in new LED 8 x 8 square type light fitting 15 W, 240 V complete all as specified and directed.

Taking down old u/s LED Square 4 x4 , 6 Watt and supply and fix in new led square type fitting 6 W, 240 V complete all as specified and directed.

Taking Down old U/s FRP junction Boxes and supply and fix in new junction boxes including MCB SP 6-10 Amp,with proper claming attachment complete all as specified and directed.

Supply only fan capacitor 2.25/2.5 mfd, 240 volts, 50Hz complete all as specified and directed. Make :- Epcos / Havells or equivalent

Taking down carefully existing unserviceable wall mouted fans of any sweep and make models type after disconnecting and taking out burnt copper winding from wall mounted fan motor and rewinding the same with new super enamelled copper wire of similer gauge and number of turns as exists for full speed,including cleaning and greasing of bearing/ bushes taping ,varnishing and replacement of defective parts and reassembling of fan and refixing after testing complete to the satisfaction of Engineer-in -Charge.

Cutting the existing surface wall of brick/ stone masonary and making round hole at any height including providing anchoring stud in wall for fixing of exhaust fan and making good the disturbed surface area to match with existing surface complete all as specified and directed.

Removing old unserviceable blade assembly from exhaust fan and supply and fix new blade assembly suitable for exhaust fan upto 300 mm sweep and including locking nuts and testing complete all as specified and directed.

Taking down storage type electric water heater (Geyser) 25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric connection and water pipe connections for carrying out repairs and replacement of unserviceable spare parts/ components such as heating element, thermostat, pilot lamp, insulating glass wool, thermal cut out, pressure release valve, safety valve, aperature plate assembly etc and making water tightness of inner storage tank and renewal of rubber washer/ gasket and nut, bolts and washers etc and assembling all parts/ accessories and adjust to required range of thermostat control including fixing back in same location and making water pipe connections and cable connections and testing for its satisfatory functioning complete all as specified and directed. Note:- (i) Spares/ components will be measured and paid separately under relevant item of schedule as supply only (ii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate.

Supply only heating element of 2.0 KW suitable for storage type water heater (geyser)

Supply only thermostat adjustable type suitable for storage type water heater (geyser) suitable for existing type and any capacity complete all as specified and directed.

Supply only thermal cut out storage type water heater (geysers) suitable for existing type and any capacitycomplete all as specified and directed.

Supply only pressure release valve suitable for storage type water heater (geysers) of any capacity complete all as specified and directed.

Supply only geyser indicator pilot lamp(red and green colour) prewired in round/square/rectangle shape suitable for geysers of any type complete all as specified and directed.

Supply and fix PVC connection pipe15 mm dia, 450mm long with end nuts and washer suitable for hot water outlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fix PVC connection pipe15 mm dia, 450mm long with end nuts and washer suitable for cold water inlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fix stop valve 15 mm dia, cast copper alloy chromium plated with crutch handle screwed both ends for GI pipe/fittings inlcuding removing old unserviceable item complete all as specified and directed

Supply and fix sheet metal enclosure with two pin and earth plug and socket including MCB SP 20 Amp,10KA,'C' series inlcuding removing old unserviceable item complete all as specified and directed. . Make:- IndoAsian/ Standard/L&T/ Legrand/Schneider/Havells/Siemens ISI Marked

Material and labour for painting to storage type water heater(Geyser) of capacity 25 litre of any make/type to complete external body with two coat of synthetic enamel paint similar to match with existing colour after preparation of surfaces including marking MES Number with black paint complete all as specified and directed directed. Make of paint:- Asian/Berger/Nerolac Note:- Painting work to be carried out after dismantling of storage type water heater(geyser)

Taking down ceiling fan1200 mm sweep to 1400 mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairsincluding servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent including renewal of minor spare parts such as split pins, cater pins, coupling bolt, capacitor holder, terminal adoptor, screws, nuts and washers etc and replacement of spare parts/accessories such as ball bearings, gun metal bushes, capacitor, canopy top and bottom, shackle clip assembly, rewinding of fan motor, painting and including hanging/ fixing back in existing location and making cable connections and testing for its satisfactory performance inclusive of all complete all as specified and directed.

Taking down exhaust fans 250 mm sweep to 300 mm sweep of any make from any height after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and renewal of minor spare parts such as split pins,cater pins, capacitor holder, terminal adoptor, nuts, bolts and washers etc and replacement of components/accessories such as ball bearings, gun metal bushes, capacitor, rewinding of fan motor including fixing back in existing location and making cable connections and testing for its satisfactory performance inclusive of all complete all as specified and directed.

Supply only ball bearing Make:- SKF Cat No 6201/ 6202 or equivalent in NBC/NRB

Supply only gun metal bush suitable for ceiling fan/ Exhaust fan of any sweep complete all as specified and directed.

Supply only shackle clip assembly with rubber bush reel and nuts, bolts and washers suitable for ceiling fan of any sweep complete all as specified and directed.

Supply only PVC canopy top and bottom with tighten screw suitable for ceiling fan of any sweepcomplete all as specified and directed.

Supply and fix galvanised louvre shutter suitable for exhaust fan 250mm to 300mm sweep and fixing arrangement at out side of wall surface at any height complete all as specified and directed.

Supply and fix down rod made of MS pipe medium grade 15mm dia of 450 mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rod with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fix down rod made of MS pipe medium grade 15 mm dia of 600 mm long duly drilled holes both ends and slot with hole in other end suitable for fixing of ceiling fan of any sweep and painting to down rod with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for painting to ceiling fan of any sweep complete body, blades and down rod with two coat of synthetic enamel paint similar to match with existing colour after preparation of surfaces including marking of MES Number with black paint complete all as specified and directed directed. Make of paint:- Asian/Berger/Nerolac

Material and labour for painting to exhaust fan complete body, blade assembly, frame of 250 mm sweep to 300 mm sweep with two coat of synthetic enamel paint similar to match with existing colour after preparation of surfaces including marking of MES Number with black paint complete all as specified and directed directed. Make of paint:- Asian/Berger/Nerolac

Taking down old unserviceable street light fittings and supply and fix new LED street light fitting, 120 watt, IP-65/66, ISI marked,white powder coated CRCA housing with highpower LEDs, aluminium front frame with flat acrylic cover white high transmission .Make :Bajaj/Havells/Philips/Wipro with all connected accessories complete all as specified and directed.

Taking down old unserviceable security light fittings and supply and fix new LED street light fitting, 35 watt, IP-65/66, ISI marked,white powder coated CRCA housing with highpower LEDs, aluminium front frame with flat acrylic cover white high transmission with all connected accessories complete all as specified and directed. Make :Bajaj/Havells/Philips/Wipro

M&labour for fault finding in main line/submain line/wiring circuit and after detection including repais needed thoroughly making the disturbed surface good all as per directions of Engineer-in-charge. Note : items needed for fault rectification will be paid saparetly from the respective items.

Taking down ceiling fan1200 mm sweep BLDC of any make from its existing position after disconnecting of electric connection for carrying out repairsincluding servicing, rewinding , overhauling, greasing etc after cleaning the body internally and externally with cleaning agent including renewal of minor spare parts such as split pins, cater pins, coupling bolt, refixing it back in existing location and making cable connections and testing for its satisfactory performance inclusive of all complete all as specified and directed.

Supply and fixing in new PCB unit for BLDC fan complete including removal of old PCB unit and refixing new with making cable connections all as specified and as directed by engineer-in-charge.

Supply and fix in new remote unit for BLDC PCB unit including complete connections all as specified and as directed by engineer-in-charge.

Supply & fix in repair MCB DP 63 Amps,C series , 240 volts complete all as specified and as directed.

N.S.ENTERPRISES (BID ID -3348995)