ADDITION ALTERATION TO BUILDING NO P 18 AT AIR FORCE STATION PATHANKOT

Amount

Taking down cement plaster on brick or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour 15 mm thick rendering in two layers (5 mm thick in cement mortar 1:4 over 10 mm thick in cement mortar 1:6) mixing with WPC on top layer @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering or plastering work 10 mm thick in cement mortar 1:3 in fascia or edging of Chajjas, ceiling etc, including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces including fixing of chicken wire mesh and iron flats/bars to arrest cracks in walls and in corners etc and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of surfaces of wall and applying 3mm thick wall care putty and making the surface smooth complete all as specified and directed by Engineer-in-Charge.

Material and labour for preperation of new surfaces of wall and applying two coats of plastic emulsion paint using auto paint roller over one coat of chalk white primer on wall surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preperation of new surfaces of wall and applying two coats of external emulsion paint of any color pattern/grey colour or cameoflauging pattern as approved using auto paint roller over one coat of primer on wall surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying two coat of plastic emulsion paint, white or tinted including removing nails etc using auto paint roller & making good disturbed surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for three coat of white wash on newly plaster surface of walls including preparation of surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc & making good disturbed surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for three coat of white wash on newly plaster surface of ceilings including preparation of surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc using auto paint roller & making good disturbed surface complete all as specified and directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling,any type flooring including cement mortar bedding (but not backing )and rubbish off the premises. complete all as specified and directed by Engineer-in-Charge.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour for 7-9mm thick vitrified glossy bathroom wall tiles of size 600mm x 1200mm in different colour combination or any shade as approved by GE, on vertical surfaces such as skirting, dados etc set and jointed using proper adhesive chemical mixture and proper levelling including cutting for sanitary fittings complete all as specified and directed by Engineer-in-Charge.

Material and labour for vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tile exc. 0.42Sqm but n. exc. 1.00 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15 mm thick in cement mortar 1:6/mixed with adhesive for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazed ceramic coloured in different colour combination/ dark colour/grey shade (alongwith highlighter shade) as approved by GE ,450x350x7mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in cement mortar (1:4) on brick or concrete surface complete all as specified and directed by Engineer-in-Charge.

Material and labour Granite work 16mm to 18mm thick (table rubbed and polished)as in platforms, counter for Wash hand basin, treads, riser or landing of stair hall, window cill or floors and like over cement mortar (1:4) screed bed 20mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black including cutting of 25 mm dia hole for gas pipe and including rounding to edges including taking down existing stone slab and similar complete all as specified and directed by Engineer-in-Charge.

Material and labour Marble work Udaipur green 16mm to 18mm thick (table rubbed and polished)as in floors,including white marble border of desired design, steps and skirting of staircase, cooking plateforms and , treads, riser or landing of stair hall, window cill and like over 10mm thickscreed bed/plaster in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black including cutting of 25 mm dia hole for gas pipe( for cooking platform) and including rounding to edges complete including roughning of existing surface all as specified and directed by Engineer-in-Charge.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material and labour for Machine cut kota stone 16-18mm thick over 10mm thick cement plaster in cement mortar (1:4) as in skirting, riser etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material and labour for grinding of existing kota stone floor in any position, taking out broken pieces (if any) and fixing new pieces and polishing complete all as specified and directed by Engineer-in-Charge.

Material and labour for non skid heavy duty designer coloured tiles as in floor for parking or other open area like flag post etc of 10 to 12 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc of pattern as approved by GE, set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour for Chequered cement concrete tiles 20cement mortar x 20cement mortar x 25mm thick, set, jointed and pointed in neat cement slurry in cement mortar (1:4) floors with white cement and pigment complete all as specified and directed by Engineer-in-Charge.

Material and labour for demolition of stone slabs of any description and in any position not specifically provided complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring to recive pavers complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:2:4 Type B-1 (using 20mm graded stone crushed aggregate) as in rounded or chamfered on edges or in coping to top of brick work in any description or other similar works complete including necessary form work all as specified and directed by Engineer-in-Charge.

Material and labour for demolition of cement concrete of any dersription and in any position not specifically provided for complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 75 mm bore PVC (SWR) pipes ISI marked in any length with or without ears laid in floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 100 mm bore PVC(SWR) pipes ISI marked in any length with or without ears laid in floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC floor trap 75 mm with anti cocroach grating, with or without hole including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 75mm dia PVC bends/hill rest bends (any radius) diminishing pieces or tapers larger bore measured complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC(SWR) pipes 75mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) bend with ovel accessed door any radius 75mm dia bore complete all as specified and directed by Engineer-in-Charge.

Material and labour taking down 15 mm bore GI tubing ,fitting and connections etc complete all as specified and directed by Engineer-in-Charge.

Material and labour taking down 20 mm bore GI tubing ,fitting and connections etc complete all as specified and directed by Engineer-in-Charge.

Refixing of old steel tubing 15/20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified and directed by Engineer-in-Charge.

Supply and fixing 15 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern) including flush pipes, CP jet with flexible pipe including making connections to trap, and to flush pipe including plastic seat cover closed pattern with stainless steel or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

Supply and fixing viterous china urinal half stall including making necessary connections to water supply pipe line complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections,brackets, PVC pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 450x300mm including brackets, 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair in Art western white/ off white viterous china rimless single piece WC of Appx size 395 x 710 x 730 mm with UF soft close seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set, P/S tra, including provn of CP health faucet and its stand complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for toilet paper holder CP, fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs decorative shape type table top Vitreous china wash basin, white of,size 495mm x 395mm x 150mm mm including CP waste coupling full thread of suitable sie of wash basin and waste pipe including fixing of central hole mixer all as specified and directed. Note : fixing of wash basin on granite/any type of surfacewith adhesive or any type of material deemed to be includinguded in rate quoted by contractor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair CP 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed by Engineer-in-Charge.

Supply only chromium plated brass central hole single lever WHB Mixture for table top wash basin 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing fancy type pillar taps for 15 mm bore pipe, cast copper alloy with capstan heads chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair fancy type angular Stop cock/angle cock 15mm bore pipe ,CP cast copper alloy complete all as specified and directed by Engineer-in-Charge.

Supply and fixing fancy type stainless steel shower rose of size 250mm x 250mm with arm of length 450mm, as approved by GE complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs CP soap dish fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs sanitary fittings including. WC, Wash hand basin, wall Mixtures/centerhole mixtures of any type, Stop vaives, shower rose, bib taps etc into same or other opening including necessary stainless steel fittings complete all as specified and directed by Engineer-in-Charge.

Material and labour for demolition of RCC in any position by cutter as required in any position complete all as specified and directed by Engineer-in-Charge.

Material and labour for demolitoin of brickwork in any position or portions of wall to any height of any thickness and making good the exposed surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for RCC (1:1 ½:3) using 20mm graded crushed stone aggregate as in slab supported on walls for kitchen platform and the like etc. including necessary form work required complete all as specified and directed by Engineer-in-Charge.

Material and labour for MS TMT bars 10 mm dia and over cut to length, bend to shape including cranking, bending and binding with MS wire not less than 0.9mm dia. complete all as specified and directed by Engineer-in-Charge.

Material and labour for excavation of trenches in any type of soil n.exc 1.5m wide and n.ex 1.5m in depth for foundation etc or for shafts , wells cesspits manholes , pier holes etc n.ex 10sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Material and labour for returning filling, including spreading, levelling, watering and well ramming in layers n. exc 25cement mortar in hard soil complete all as specified and directed by Engineer-in-Charge.

Material and labour for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete in foundation filling and mass concrete type D2 1:4:8 (40 mm graded crushed stone aggregate) complete all as specified and directed by Engineer-in-Charge.

Material and labour for brickwork with old size bricks straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Providing precast cement concrete type B0 1:2:4 (12.5mm graded crushed stone aggregate) louvres and jallies/jaffery, 25mm thick (mea sured solid), set in cement mortar 1:4 including all mouldings including frame complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 20 mm bore stainless steel curtain rod with 1 mm thick wall thickness including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for in repair Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for rep Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20 mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed by Engineer-in-Charge.

Material and labour for taking down and refixing the shutters of any description exc. 1 Sqm but n. exc. 2 Sqm in same or other opening after repair, easing and adjusting or resecuring complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm each and removing from site .all complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc. 4.00 Sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n. exc 2.00 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made single extruded WPC solid decorative type flush door shutters of size 30mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made single extruded WPC solid decorative type flush door shutters of size 35mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws complete all as specified and directed by Engineer-in-Charge. Note: stainless steel butt hinges and necessary SS screws shall be paid seperately.

Supply and fixing 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire mesh etc sizes of members as per clause 8.24(a) of SSR Part-I complete all as specified and directed by Engineer-in-Charge.

Material and labour for 35mm thick single piece factory made wire gauge door shutter and including of wire cloth ( Steel And Aluminium XPM and rates thereof includinguded ) manufacturing by PVC sheets printed 5mm thick on both side on the frame made out of M.S. tube 19 SWG, size 19 x 19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement compete as per drg No. CEPZ/TD-378/sheet 1/1 dated 27/12/2011 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made single extruded WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 50 X 100mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made double extruded/rebated WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 50 X 125mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Box type Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass glazed shutter ) , of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3 mm flat iron including hinges of suitable size, steel handle, steel peg stay dovetailed or welded , 4 Nos tower bolts 100mm long ,10mm square bar grills and @75mm c/c welded to frame, on any floor ccomplete all as specified and directed by Engineer-in-Charge and shown on drg no CEPZ/TD-245/01 & and 246/02 sheet 1/2 & 2/2.

Supply and fixing 3.00mm thick fibre sheet ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing fixed toughned glass 10mm thick in frames in fixed doors or openable partatition doors and with bracings to be fixed in walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for powder coated( min. thickness of power coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Anodised aluminium ( min. thickness of power coating 50 micron) window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Anodised aluminium grill ( anodised transparent of dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 ) of approved design/ pattern with approved standard section and fixed to existing window frame with CP brass/ SS screws @ 200mm C/C , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodises Aluminium standard section around the opening, all complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Double action floor spring hydtaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing hydraulic door closer with Polyurethane (PU)finish with double speed adjustment finish complete including all necessary fixtures if required complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 300mm long Stainless steel sliding door bolt with hasp and staple ( bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for heavy duty angle door lock swith both side handle with set of three keys of premium quality of design and color as approved to be fixed in doors and locking assembly in chowkhat complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Stainless steel Butt hinges,exc 125 mm long, ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel tower bolt 150 mm size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150 mm long stainless steel handels complete all as specified and directed by Engineer-in-Charge.

Supply and fixing heavy duty stainless steel magnetic door stopper 4 inches long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 200mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel Peg set of six of size 460mm x 40mm x 3mm, fixed with machine screws and wooden and plastic cleats (minimum weight 190 gms), complete all as specified and directed by Engineer-in-Charge.

Supply and fixing rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill, complete all as specified and directed by Engineer-in-Charge.

Material and labour prepration of old painted steel surfaces of any description, by scrapping off old marks, tints of any kind, not other wise described over 10 cement mortar width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified and directed by Engineer-in-Charge.

Material and labour prepration of old painted wooden surfaces by scrapping off old marks, tints of any kind, of any description, not other wise described over 10 cement mortar width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified and directed by Engineer-in-Charge.

Material and labour prepration of new steel surfaces of any description, , not other wise described over 10 cement mortar width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made single extruded WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 45 X 70mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made 20mm thick solid WPC(wood particle composit) sheet one side UV printed (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level etc. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair factory made 18/19 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing continuous (piano) hinges, mild steel, bright finish width of flaps equal to shutter thickness complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm size hasp and staple,stainless steel safety type, fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing high quality Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for soft close concealed Auto hinges for cabinet case complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for heavy duty 20'' long telescopic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by Engineer-in-Charge.

Material and labour for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed by Engineer-in-Charge.

Material and labour for taking down existing boarding of any description complete all as specified and directed by Engineer-in-Charge.

Material and labour for Gl frame work for seamless ceiling of grid size 605mm x 605mm, comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engineer-in-Charge.

Material and labour for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-Charge.

Material and labour for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

Material and labour for 1mm thick wall care putty on ceiling surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fixing False ceiling of 9.5 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm including taking down existing ceiling board & grid work etc of any type/ pattern complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws/ l or J type hooks including washers as required on site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing rolled MS sections conforming to Fe-410-W(Gde-250 quality B) as in angles,flats,channels , hollow sections for rafters, purlins and frame work for drain coven, or heavy channel or I section for beamsroof sheeting and the like, hanged on walls, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for mild steel tubes for structural purpose as in posts,purlins, rafters and cut to length as required including running welding to frame complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting holes in brick/ stone walls built in cement /lime mortar for inserting holdfasts/iron frames and making good the dismanteled portionin cement concrete 1:2:4, type B1 as required of size 15 x 15x 15cement mortar of PCC block complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection laid in alternate bays,including demolition to existing PCC, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator light fittings etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge.

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with sunken type pressed steel terninal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed by Engineer-in-Charge for following :- (a) One light point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and directed by Engineer-in-Charge

(c) One 3 pin switch socket outlet point 5 Amps on same board complete all as specified and directed by Engineer-in-Charge

All as per item 130 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed by Engineer-in-Charge.

Material and labour Modular switch 1 way 6A, 1 module, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

Material and labour Modular switch 1 way 16A, 1 module complete all as specified and directed by Engineer-in-Charge.

Material and labour Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Bell electric AC 230 Volts single pole complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Modular Bell push, flush type, 6 amp ,1 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing White cover plate with frame, 3 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing White cover plate with frame, 6 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing White cover plate with frame, 8 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Metal flush box 3 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Metal flush box 6 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Metal flush box 8 module complete all as specified and directed by Engineer-in-Charge.

Material and labour for concealed sub main wiring using single core four run PVC insulated, unseathed stranded copper conductor cable of size 10.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 10.0 Sqmm (green colour) as earth continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Three runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit

Material and labour for concealed sub main wiring using single core four run PVC insulated, unseathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Material and labour for concealed sub main wiring using single core four run PVC insulated, unseathed stranded copper conductor cable of size 4 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm (green colour) as earth continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Taking down old and unserviceable light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and directed by Engineer-in-Charge.

Material and labour Fan step regulator, 120W - 2 module complete all as specified and directed by Engineer-in-Charge.

Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed by Engineer-in-Charge.

Single pole and neutral enclosure with a two pin and earth plug and socket omplete with one single pole MCB complete all as specified and directed by Engineer-in-Charge.

Sheet metal enclosure VTPN MCCB DB 6 Way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 as per IEC 61439-3 suitable for flush mounting complete with 250 A aluminium bus bar for each phase with 2 neutral and 2 earth bus bars with cable ties for cable management for DB's when MCBs & MCCB 100 Amps (as incomer) to be used, fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed by Engr In-Charge.

Sheet metal enclosure Double door metallic for DB when MCBs to be used SPN 12 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed by Engr-In-Charge.

Sheet metal enclosure Double door metallic for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed by Engr-In-Charge.

Taking down carefully unserviceable MCB SP/SPN/Isolator of any rating/size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed by Engineer-in-Charge.

All as per item 160 above but SPN 16-32 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCCB 100 Amps, 3 Pole, 415 V, 16 KA thermal magnetic adjustable type with short circuit and overload protection complete all as specified and directed by Engineer-in-Charge.

Supply and fix bus bar chambers factory febricated suitable for 3 Phase & neutral iron clad with 4 Nos 200 amp rated copper strips with two Nos Earthing connection bolt with locking arrangement front door operated complete fixed flush in wall and making good the disturbed wall surfaces complete all as specified and directed by Engineer-in-Charge.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. Mm, 3.5 Core complete all as specified and directed by Engineer-in-Charge.

Sand cushioning to the under ground electric cable complete all as specified and directed by Engineer-in-Charge.

M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed by Engineer-in-Charge.

Supply and fix 40 mm GI pipe , light grade with all fitting laid in trenches/road/wall complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp with GI bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including Connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED Light fitting muzrisis picture light 12 watt 220V AC decorative type with and LED lamp including connection up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Material and labour for earthing complete with galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with 6mm dia M.S. round bar placed 75mm c/c and handle of 10mm dia, MS bar made to shape, GI medium grade 20 mm bore pipe for watering perforated at bottom, 1.75 meter long placed on top edge of earth plate, common salt & charcoal filling, funnel, wire mesh and earth work not exceeding 50 meters all as per electrical plate No 3 of SSR Part I (2009) and connected to earth test points complete all as specified and directed by Engineer-in-Charge.

M/S SINGH AND ASSOCIATES (BID ID -3301861)

kewal builders (BID ID -3301935)

Vijay Kumar Contractor and Engineers (BID ID -3301486)

JAGDISH SINGH ASSOCIATES (BID ID -3302009)

M/s Shakti Electric Works (BID ID -3302024)

M/S NAVEEN PATHANIA (BID ID -3307528)