Providing Street Light on 60 mtr. wide road from Chaar Murti Rotary to Tigri Rotary NH-24 Link road, Greater Noida.

SITC of Supply and fixing of 9000mm Conical Arch pole made of Continuously tapered circular Hot rolled steel curved pipe (E250 to IS 2062: 2011) 175-185mm Bottom Dia x 76mm Top Dia x 3mm thick with 8984mm Height. Wind speed considered in design 167Km/Hr in compliance with IS 875 Part 3: 1987. The angularly projecting arm made of MS pipe 60.3mm Dia x 2.6mm thick extending from conical pole, facilitates the fitment of street light luminaire at 1604mm from the vertical axis of the pole. Pole section welded by certified welders using high end MIG welding processes. MS service door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A+B7 stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062: 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC215. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimensions are within +/- 5% tolerance. After fabrication, entire pole is shot blasted. The pole is coated pure polyester powder coating (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options Including nut and bolt, 1:2:4 RCC Foundation, excavation, back filling as per give GA drawing all, t&p material etc complete in all respect as per direction by E/I. (Make- Havells,Philips, Transrail, Orient, Eveready)

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. (Cat-AA) Confirming to IP66 Protection complete in all respect. UPPWD 2018 / Sl. No. 1425-(A)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD 2018 / Sl. No. 501

16 sq. mm 4 core (i)

50 sq. mm 3-1/2 core (L)

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. UPPWD 2018 / Sl. No. 503

16 sq. mm 4 core (i)

50 sq. mm 3-1/2 core (L)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. UPPWD 2018 / Sl. No. 504

Numbering of poles with combination of yellow and black colour paint etc. complete in all respect as per direction of the Engineer-Incharge at SITE SOR 42/ FTS No. 128181

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. UPPWD 2018 / Sl. No. 701

S/L of 90 mm dia DWC pipe for drawing of power cable across the road by drilling of 120 mm dia at 1 mtr. below the road level thereby doing the work of providing DWC pipe by trenchless method GNIDA Approved Rate 2024 / Sl. No. 15

S/F of G.I. pipe 100 mm dia 'B' class ZINDAL / TATA make including required material T&P etc. complete in all respect as per direction of the Engineer-Incharge at SITE SOR 37/ FTS No. 128181

Supply & Fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. below the GL complete with bolts & nuts & GI earth wire 7/14. Complete in all respect, as per direction of E-I/C. GNIDA Approved Rate 2024 / Sl. No. 41

Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge UPPWD 2018 / Sl. No. 289

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. UPPWD 2018 / Sl. No. 717

Supply & Fixing HDPE pipe 90 mm dia PE-63/PN-4 including required material, T&P Etc. Complete in all respect as per direction of E-I/c. GNIDA Approved Rate / Sl. No. 19

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN (F-II) UPPWD 2018 / Sl. No. 807

Labour Cess and GST will be paid extra as per govt. orders