AGAMT 25-26

Amount

1.Construction of PD Shop in Karatholuvu H/O Karatholuvu (Type I) (S.F.No :1055)

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete.

Supplying and erection of centering for sides and soffit with M.S.sheet and country wood props including hire charges for materials and all labour charges etc complete Below sill level

Grade beam

Roof Slab

Supplying and fabrication of steel including cost and conveyance of steel to site and cost of binding wire including all labour charges for cutting, bending, tying and forming grills for all works

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc complete. a) Below Basement& Grade beam

b) Above Basement

Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete. a) Below Basement

b) Above Basement

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete.

Granolithic floor finish with cement concrete 1:2:4 mix using 10-12mm ISS chips including cost and conveyance of all materials and all labour charges etc, complete.

Dadooing of walls with colour glazed tiles of size 300x450x8 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Distempering two coats including cost of all materials and labour charges etc, complete.

Painting two coats over OLD or NEW Plastered surface using Approved Quality of Exterior Emulsion Paint including cost and all Labour charges etc., complete for 10 sqm

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

Supplying and fixing of RCC Rings 900mm dia for leachpit including all cost of material,conveyence and all labour charges etc,complete

Supplying and fixing of water closet, with "p" trap & foot rest-1Set icluding all cost of materials , conveyance and all labour charges.,

Supplying and fabrication of the following steel doors , window,Ventilators and counter including cost and conveyance and all charges etc complete.

Steel door D1 1.00 x2.10m

Steel door D2 0.90 x2.10m

Steel window 1.00 x1.30m

Steel window 0.90 x1.30m

Steel ventilators 0.90x0.60m

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Manually Operated

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG wire for open Light point/fan point (5 points per coil) [ SD No. 21 ]

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point ( SD - 10 )

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting ( SD - 87 )

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") ( SD 106 )

Supply and fixing of TNEB meter board suitable for 32A singlephase service connection with 32A fuse unit (500V) 32A neutrallink and earth link(1"x1/8"copperflat) on TWplank of size3 75mmx300mmx19mm with supporting TW reeper of 1"thick aneither side with painting withs uitable bolt and nuts for fixing the TW plankon wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit ( SD - 125 ).

Supply and run of 2 of 4sq.mm.(56/0.3) PVC insulated SC unshea the dcopper conductor of1100V on 7/20GI bearer wire for service connection mains ( SD -65 ).

Supply and run of 2 x1.5sq. Mm(22/.3) PVC insulated SC unsheathed CU. Conductor of 1100Grade in 25mm Dia GI PIPE (Glass"B")suitably Bent at both ends with necessary angle iron upright and end supports for Mains [SD 69]

Provision for Name board charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

IYYAPPAN (BID ID -1307520)