SPL REP OF OLD LT POLE LT OH CONDUCTOR UG CABLE ALONG WITH CONNECT ACC AT HQ CORPS OFFR M0ESS ACCN SPL REP TO INT WIRE OF ELECT AND MECH FITT AND FIX OF BLDGS NO OT01 OT05 TA36 OF A MESS PROVN OF HIGH MAST SECURITY LIGHTS FOR ASC COY PO CER MW WORKS

Amount

S&F for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, including dismantling old u/s cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as specified and as directed by Engr-in-Charge.

Supply & fix shackle type, porcelain,vitreous, white, green & brown insulator including one galvanised iron steel spindle, two galvanized iron washer and one galvanised iron nut, working pressure 1100 Volts and of size 115 mm dia and 100 mm height ISI marked including dismantling insulators any type and any size complete all as specified and directed by Engr-in-Charge. Make : BHEL/Mysore/Pactil/Jayshree/WS Insulators/Southern Insulators/Jaipura Brothers/Hitkari/Bengal Poteries

S&F pin type, porcelain,vitreous, white, green & brown insulator including one galvanised iron steel spindle, two galvanized iron washer and one galvanised iron nut, working pressure 1100 Volts and of size 65 mm dia and 100 mm height ISI marked including dismantling insulators any type and any size complete all as specified and directed by Engr-in-Charge. Make : BHEL/Mysore/Pactil/Jayshree/WS Insulators/Southern Insulators/Jaipura Brothers/Hitkari/Bengal Poteries

M&L for Stay assembly complete with stay plate bow, stay rod of dia 16 mm and galvanised iron stay wire stranded of size 7/4 mm and accessories as shown in electric plate No 1 of SSR Part I (Excavation and concrete measured separately) including dismantling old u/s stay assembly complete all as specified and directed by Engr-in-Charge.

Supply and installation,over head, aluminium conductor, steel reinforced, weasel, including making connections and fixing on poles with all necessary arrangements, including dismantling of old ACSR or AAC conductors complete all as specified and as directed by Engr-in-Charge. Note: Weight of ACSR or all aluminium conductors drawn for overhead lines is to be determined by measuring taut horizontal distance between centers of two adjacent poles and compounding the weight of conductors of that size and length and 3% extra added for sag, jointing, jumpers, etc.

M&L for galvanized steel wire 4 mm dia for continous earth wire including dismantling of old earth wire complete all as specified and directed by Engr-in-Charge

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 2 core, 10 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches including taking down of old cable complete all as specified and directed by Engr-in-Charge. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ Gloster/Havells/KEI/ RR Kabel Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 2 core, 25 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches including taking down of old cable complete all as specified and directed by Engr-in-Charge. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ Gloster/Havells/KEI/ RR Kabel Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 50 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches including taking down of old cable complete all as specified and directed by Engr-in-Charge. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ Gloster/Havells/KEI/ RR Kabel Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 70 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches including taking down of old cable complete all as specified and directed by Engr-in-Charge. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ Gloster/Havells/KEI/ RR Kabel Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 95 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches including taking down of old cable complete all as specified and directed by Engr-in-Charge. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ Gloster/Havells/KEI/ RR Kabel Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 240 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches including taking down of old cable complete all as specified and directed by Engr-in-Charge. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ Gloster/Havells/KEI/ RR Kabel Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 630 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches including taking down of old cable complete all as specified and directed by Engr-in-Charge. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ Gloster/Havells/KEI/ RR Kabel Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, welles cesspitsm, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depthe in hard/dense soil and getting out , complete all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, punned to 18 cm thick complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and directed by Engr-in-Charge. Note : only punned thickness of 18 cm shall be measured and paid.

S&F in replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150 x 40mm, complete all as specified and directed by Engr-in- Charge.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in sub base, foundation, filling and mass concrete, complete all as specified and as directed by Engineer-in-charge.

S&F in replacement mild steel galvanized pipe light grade 50 mm nominal bore for passing of cable fixed to poles/walls/laid under floor/roads complete with and including, fittings as requited all as specified and directed by Engr-in-Charge. MAKE : TATA/JINDAL/BST/Prakash Surya

S&F in replacement mild steel galvanized pipe light grade 80 mm nominal bore for passing of cable fixed to poles/walls/laid under floor/roads complete with and including, fittings as requited all as specified and directed by Engr-in-Charge. MAKE : TATA/JINDAL/BST/Prakash Surya

S&F GI Bracket made out of 40mm dia medium grade pipe 1.5m length to shape for fixing on pole and suitable for 65 Watt strret light with 02 Nos clamps of flat iron (40 x4mm) nuts, bolts and washers including painting with two coats of aluminim paint over a coat of primer including old u/s taking down old GI brackets complete all as specified and directed by Engr-in-Charge. Make : Jindal/TATA/Prakash Surya/BST

Supply and fix in replacement LED street light fitting 45 Watts, having powder coated pressure die cast aluminium housing with IP 66 efficient, protection with heat resistant toughned glass with individual LED lenses complete including making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 sq mm complete all as specified and directed by Engr in Charge. Make : Cat part No. LTESST45WLED/LS Indus T-Series of C&S or equal approved in Bajaj/Philips

Supply, installation, testing and commissioning in replacement of LT Panel cubical type out door floor mounted weather proof totally enclosed, (CPRI approved) factory made and made out of 3 mm thick CRCA powder coated sheet and angle iron complete with bus bar of Aluminium of suitable size for capacity 945 Amps 3 Phase and Neutral 415 Volts 50 Hz mounted on epoxy type insulators with PCC flooring, foundations and angle iron base frame all as per manufacturer's instructions complete all as directed by the Engr-in-charge including following accessories:- a) MCCB 630 Amps Capacity, 4 Pole, 36 KA, 415 Volts - 01 No (For incoming) b) MCCB 250 Amps Capacity, 4 Pole, 25 KA, 415 Volts - 02 Nos (For outgoing) c) MCCB 200 Amp Capacity, 4 pole, 25 KA, 415 Volts - 01 No (For outgoing) d) MCCB 100 Amp Capacity, 4 pole, 25 KA, 415 Volts - 01 No (For outgoing) e) MCCB 63 Amp Capacity, 4 pole, 25 KA, 415 Volts - 02 Nos (For outgoing) c) Volt meter, Amp Meter, Indicator lamp complete - 01 Set Note : (i) The Make of Change over and MCCB considered are Legrand/L&T/ABB/ Schneider/Siemens (ii) The rates deemed to be inclusive of suitable size copper wirinng/ copper strips from Main I/C MCCBs to Channge over switch, Change over switch to Main Bus bar and Bus Bar to Outgoing MCCBs complete all as specified and directed. (iii) The design of Panel, Make of complete accessories and drawing of the LT Panel should be submitted by the contractor for pre-approval from the Engineer-in-cfharge before order and execution at site. (iv) Make of Panel and all accessories (except those for which the makes already mentioned in this item) as per make of E-in-C's approved list.

Material & labour for Earthing using galvanised iron earth plate electrode of size 60cm X 60cm X 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip of size 32x6mm by means of bolts, nuts, check nuts and washers made of GI and provision of GI pipe medium grade 40 mm dia for protection of earthing lead and 20mm dia GI light grade pipe for watering arrangement including funnel, wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old unsv earthing material complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed.

M&L for point wiring for one light point or fan point controlled by one switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per item No 27.00 here-in-before but 1.5 Sqmm for one 3 pin 5 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per item No 27.00 here-in-before but 1.5 Sqmm for one 3 pin 5 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per Item No 27.00 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5sqmm size complete all as specified and directed by Engr-in-Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per item No 27.00 here-in-before but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board incl one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl teak wooden board with 3mm thick of hylam top sheet complete all as specified and as directed. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

M&L for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr-in-charge. Make : Anchor/Legrand/Crabtree/Cona

S&F switch piano flush type one way single pole 5 Amp 240 volts. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 2 in 1, 3 pin 5 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F for socket outlet 3 Pin, 5A, flush type complete all as specified and as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F for Modular switch one way single pole 10 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular switch one way single pole 16 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6A -2/3 Pin combined 2 module 240 Volt. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6/16 A -2/3 Pin combined 2 module 240 Volt Make : Anchor/Legrand/Crabtree/ABB

S&F for modular white cover plate with frame (inner plate) 3 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame (inner plate) 8 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame (inner plate) 6 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame (inner plate) 4 module. Make : Anchor Roma/Havells/L&T

M&L for lamp holder PVC/Poly cor bonate type insulated body with back plate suitable for batten fittings as specified and directed. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of LED Bulb 9 Watts, 230 volts, 50 hz, AC, complete all as specified and as directed. Make : Cat part No - LHLDBWHB4L8R009 of Havells or equivalent in Bajaj/Philips.

Supply and fixing MCB SP 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 96 of Legrand (DX³) or equal approved in Schneider (Acti-9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 98 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 09 to 4086 17 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 18 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB TPN 63 Amps, 'C' series, 415 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4086 83 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB 4 pole 100 Amps, 'C' series, 415 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)/L&T

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 12 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 10 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, TPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 70 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Sub main wiring with two runs of 6 Sqmm (2x6 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x6 sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6 sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB, Make of Casing Caping : PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 4 Sqmm (2x4 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 4 Sqmm (1x4sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 4 Sqmm (2x4sqmm), one run of 4Sqmm (1x4 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 2.50 Sqmm (2x2.50 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 2.5 Sqmm (1 x 2.5sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 2.50 Sqmm (2 x 2.50 sqmm), one run of 2.50 Sqmm (1 x 2.50 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

S&F in replacement of electric bell (multi music type) AC, 230Volts Single pole. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of electric bell push, flush type 5 Amp Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of PVC Gang box 2 in 1, 5 pin 5 & 15 Amp flush type universal all as specified and directed.

S&F in replacement of Skylux LED 36watts recessed 2x2 luminaire to enhance the delight of occupants with comfortable experience through its design & glare free soft illumination and connection of 3 core copper wire with all accessories(Warm White) Make : Cat part No -BZRSQL 36 W GZi W (Natural White) of Bajaj or equivalent in Philips/C&S/CG.

S&F in replacement of Surface and wall mounted LED batten, 20 watts, Fixture size 1200 x 108 x 62 mm, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge. Make: Cat part No.ENDURALINEARNEOBS20WLED865SPCWH of Havells or equal approved in Bajaj/C&S/Phillips/CG

S&F in replacement of Surface and wall mounted LED batten, 10 watts, Fixture size 600 x 108 x 62 mm, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge. Make: Cat part No.ENDURALINEARNEOBS10WLED865SPCWH of Havells or equal approved in Bajaj/C&S/Phillips/CG

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc incluidng taking down of old u/s earthing set complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

S&F of 20 mtr height galvanized High Mast complete with top thickness of 4 mm and botton thickiness of 5mm, base flange diameter of 830mm, base flange thickness of 32mm, lantern carriages, which assembly with integrated electric drive & controls and stainless steel wire, supports, flexible copper cables, earthing and lighting protection system along with LED based aviation lighting system and all devices & accessories as required to complete the high mast lighting system suitable for mounting 10 Nos.LED Flood light of 150 watt,complete with feeder pillar control Panel. Note : Rate shall be inclusion of excavation earth and RCC foundation as per manufactures design drawing.

High mast light shall comprise of the following:- High dip galvanised mast light suitable for 09 flood light symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 gauge and double drum with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrestor spike including RCC foundation as per height of 20 mtr, complete all as specified in clause No. 19.23B of SSR 2009 Part-I and as directed by Engr-in-Charge and as specified here-in-under:- High Mast System:- Make:- Bajaj electrical Ltd / GE India Industrial (P) Ltd/ Crompton Greaves Height of mast light- 20 mtr No of sections-02 Material construction: S355 grade as per BS-EN10025 Base dia and top diameter (A/F) top 150 mm, Bottom: 410 mm Plate thickness and section length, top: 4 mm, Length: 10500 mm Bottom: Thickness 5 mm, Length: 10500 mm Cross section of mast - 20 side polygon Standard for galvanization as per BS EN ISO 1461 Size of opening and door at base- 1200 X 250 mm Diameter of base plate- 830 mm Thickness of base plate- 32 mm Lightening protection final: GI Single spike of length not less than 1.2 m

Max wind speed : 50 m/s as per IS:875 (Part-III) Nos of foundation bolts- 08 Nos (minimum) PCD of foundation bolts- 490 mm (minimum) Type/diameter/length of foundation bolts- TS 600/300 mm dia/850 mm long integral power tool will be installed inside base compartment for its operation.

LUMINARIES CARRIAGE: Material of construction- 50 NB EWR class B MS pipe Diameter of carriage ring (mm) 711 mm (ID) Construction of 10 arm, welded, 2 sections Load carrying capacity 12 luminaries

TRIALING CABLE: Conductor copper 5 core 4 Sqmm Insulation EPR insulated PCP sheathed Nos of circuit per mast: one water proof type junction box with IP 55 protection enclouser made of cast aluminium shall be provided on the carriage assembly as required from which the inter connection to the flood light luminaries and associated control gear fixed on the carriage shall be made

WINCH/POWER TOOL: Type/SWL of winch double drum, SWL 750 Kg Method of operation- Integral motor and provn of manual operation to operate the winch manually by a suitable handle and or by an external power tool complete all as directed. Motor Capacity: 1 HP No of speed: Single speed 1.5 to 1.8 m/s to avoid any high speed jerk. Non corrodible type stainless steel wire rope with centre core being of same material grade/construction AISI 316, 7/19 construction. No of ropes-two continuous without any intermediate joint between winch and lantern carriage. Diameter (mm) 6 mm Breaking load capacity: 2X2350 Kg

Two Nos aviation obstruction light with LED lamp as per including provn of automated battery backup for atleast 4 hours in case of non availability of power supply, minimum size of inverter 800 VA-01 No and maintenance free battery 12 V, 150 Ah-01 No with PVC enclosure trolly type for battery and inverter including provn of shelter of size 1.5mX1mX1m for protection from rain, water etc made out of 3.15 mm thick PGI sheet roof with angle and frame of 40X40X6 mm including necessary earthwork, PCC 1:2:4 type B-1 using 20 mm graded aggregate. Make of inverter and battery- Microtech/Luminuous/Sukum/Exide. Make: Bajaj Cat Part No BGAV 302 LED or equivalent in Philips/Havells

Note: (i) Separate cable 2x2.5 sqmm copper conductor single core from LT panel to each aviation light shall be provided. (ii) Thimble shall be secured on ropes by compression splices. (iii) Design of foundation based on loading of the mast shall be the responsibility of contractor. Design of foundation shall be as per manufacturer's recommendation and cost there of shall be deemed to be included in rate quoted. (iv) Rate quoted shall be deemed to include necessary excavation, earth work and removal of surplus soil to a distance exc. 100 Mtr. (v) If any change in the dimensions of members of highmast occur from the manufacturer's mannual, the same shall be followed as per the manufacturer's mannual and no extra cost on account of this shall be paid to the contractor. (vi) If any item erroneously left out from the above description of item and mandatory to function the high mast successfully as per manufacturer's and same shall be deemed to be included in over all rates quoted.

Supplly and Fixing Energy Efficient IP 66 LED Flood Light TURBO LED 200 Watt to illuminate large areas as in high mast application of 20 mtr Height , façade illumination, large open areas, sports lighting etc. using High Power LEDs of > 5W each with aluminium extruded heat sink for effective heat dissipation, CCT 5000 to 5500K, CRI > 67, pf > 0.95, operating performance temperature -20 digree to +45 digree C, LED Module life span >50,000 hours, with External Surge & over voltage Protection Device (safe up to 440 Volts) with connecting cord of copper flexible cable to be provided with Weatherrproof Connector at luminary end. The enclosure made of aluminium alloy, without the use of overall acrylic/glass cover to exhibit high lux utilization factor. The LED Fitting being modular in construcation with Onside replaceable parts, built using Independent IP65 rated constnt current LED Driver, efficiency >85%, Vthd <10% Ithd <15% and with IP-67 rated inter connections complete all as specified and as directed. Make : Cat part No BARFEG 200W LED WHITE of Bajaj or equal approved in Havells/Phillips/ Wipro/Syska

Supply and lay cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with standed aluminium conductor of following sizes 70 sqmm x 3.5 Core complete all as specified and directed by Engr-in-Charge Make : Cable corporation of India/Havells India Ltd/Universal Cables Ltd/ Polycab/RPG Cables/Gloster/KEI

Supply, Installation ,testing and Commissioning of Factory made out door LT Panel for High mast with Electronic Three Phase Timer Switch, 63Amps TPN 415 Volts for street light fittins with contractor 65/TP,Astronomical , LED indicator with encloulsure duly mounted on Pole/Panel/Wall with tinted glass looking and front opening and locking arrangement, weather proof complete all as specified and as directed by the Engr-in-Charge. Make- HAVELLS Cat IHXTS09120 or L&T/SIEMENS

Material & labour for Earthing using galvanised iron earth plate electrode of size 60cm X 60cm X 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip of size 25x4mm by means of bolts, nuts, check nuts and washers made of GI and provision of GI pipe medium grade 40 mm dia for protection of earthing lead and 20mm dia GI light grade pipe for watering arrangement including funnel, wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 3 of SSR Part-I 2009.

S&F in replacement strorage type water heaters, vertical type, 25 Ltrs capacity with Energy saving Incology 800 heating element, Feroglass coated tank with single weld line design, high density PUF insulation with power 2000 watts, operating voltage 220-240 volts, with superior heating performance and excellent resistance to both oxidation & carbonisation at high temp setting including of wall manual accessory and 2 flexi hot and cold water pipe complete alll as specified and directed by Engr-in-Charge. Make : CALENTA MECHANICAL of Bajaj or equal approved in Racold/Crompton/ Venus/Orient/Jaquar

S&F for cutting of existing pipe line of size 15 mm in position for making branch connection complete all as specified and directed by Engr-in-Charge.

S&F galvanised steel water tubing 15 mm bore medium gde for geyser vent /water connections with required fittings complete fixed to wall /ceilings including making good the disturbed surfaces all as directed. Make : Jindal/TATA/Prakash Surya/BST

Chromium plated, fancy type Stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified. MAKE: PARKO/MARC/ESS ESS/CERA

15mm bore bib tap, (minmum weight 350 gms), chromium plated, fancy type, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engineer-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

Sub main wiring with two runs of 4 Sqmm (2 x 4 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all conduit accessories etc with one run of 2.5 Sqmm (1 x 2.5sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 4 Sqmm (2 x 4sqmm), one run of 2.5 Sqmm (1 x 2.5 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

S&F SPN enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and directed by Engr in Charge. Make : Legrand/Schneider/Siemens/ABB/L&T

M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil complete all as specified and directed

Providing, cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks for hold fasts, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed by Engineer-in-Charge.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engineer-in-charge.

TMT mild steel bars, 5mm dia and over upto and including 10mm dia, as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engineer-in-charge.

M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as spd and directed.

Material & Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for rendering 10mm thick in cement mortar 1:6 on other than fair faces of brick walls or stone masonary plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L broken stone and boulders hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick water and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) 100 mm thick sub base, sub floor and pavings complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) 100 mm thick as in floors and the like including the finishing the surfaces even and fair complete all as specified and directed.

M & L for joint free Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes complete all as specified and directed. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY

M&L for (350mmx250mmx7mm/450mmx350mmx 7mm thick ) coloured glazed ceramic tiles set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thick rendering in CM 1:4 below tile for dado/skirting complete all as specified and directed by Engr-in-Charge. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY

M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed. MAKE : Snowcem/Asian/BERGER/DURACEM

M&L for preparing newly plastered surfaces of internal walls and applying three coats of white wash complete all as as specified and as directed.

Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

S&F 0.63 mm thick corrugated Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. Make : SAIL/TATA/JSW STEEL

Mild Steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed

M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, supplied and fixed plain fillets, square, rectangular or triangular in section clean swan, secured with nails or brads complete all as specified.

Factory made 35mm thick IInd Class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

S & F 100mm Aluminium handles, cast type, anodised complete all as specified and directed by engineer in charge.

Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 75 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 150 mm long, complete all as specified and directed.

Preparation of new or previously untreated steel or steel based surfaces of any description not otherwise described not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide or zinc chrome primer complete all as specified and directed by Engineer-in-Charge. MAKE: NEROLAC PAINTS/ JEHNSON & NICHOLSON/BERGER PAINTS/ICI DULUXE/ASIAN PAINTS

S&F PVC waste pipe 32 mm bore with cup and washers complete on new or old locations complete all as specified and as directed.

600 mm x 450 mm mirror of thickness 5/5.5mm of slected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete, all as specified and as directed by Engr-in-Charge. MAKE: SAINT GOBAIN / MODI GUARD / TRIVENI FLOAT GLASS

Viterous china wash basin, white flat back size 600x 480mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes complete, all as specified and as directed by Engr-in-Charge. MAKE: CERA/HINDWARE/PARRYWARE

PVC connections 15 mm size with PTMT nuts of length 600 mm complete, all as specified and diected by Engr-in-Charge. Make: Prayag/Polytuf/Supreme

15mm bore bib tap, (minmum weight 350 gms), chromium plated, fancy type, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete, all as specified and directed by Engineer-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe complete, all as specified and directed by Engineer-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

Chromium plated, fancy type Stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete, all as specified and directed by Engineer-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes complete, all as specified and as directed by Engr-in-Charge. MAKE: SINTEX/POLYWELL/ROTEX/POLYCON

S&F 15mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F 20mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F 20mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F in repair 20mm outer dia PPR Ball valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F grating doom 125 mm with waste hole of PTMT complete all as specified and as directed. Make: Prayag/Polytuf/Supreme

S&F PVC (SWR) pipe 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors cement complete all as specified. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

M&L 75 mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S&F PVC (SWR) pipe 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors cement complete all as specified. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S&F 110mm bore PVC (SWR) pipe bends any radius complete, all as specified and as directed. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S&F 75mm bore PVC (SWR) pipe bends any radius complete, all as specified and as directed. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete, all as specified and as directed. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete, all as specified and as directed. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S & F brass towel rail, 600mm long, chromium plated with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs complete all as specified and as directed. MAKE: PARYAG/POLYTUF/SUPREME

M&L for 6mm thick ply wood (No of plys 05) BWR, type BB as in ceiling panelling fixed with nails to timber frame work, complete all as specified and as directed. Make : DURA PLY/GREEN PLY/DURO/BHUTAN BOARD/ CENTURY/DURIAN

M&L for 2nd class softwood clean sawn plain fillets, square,rectangular or triangular in section, clean sawn, secured with nails or brads exceeding 13 Sqcm and n.exc 25 Sqcm in section as in framed work complete all as specified and directed.

Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge. MAKE: NEROLAC PAINTS / JENSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

R B TRADERS

M/S ADHISH ENGINEERS

SONAM ANGCHOK