CONSTRUCTION OF K R PETE BRANCH FIIRST FLOOR BUILDING

CONSTRUCTION OF K R PETE BRANCH FIIRST FLOOR BUILDING

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

MIX 1:2:4 (M15) Using 20 mm and down size

graded crushed coarse aggregates(2021-22 SR Page No.73(v1), Item No.2.4.1)

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x150x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix 1:3 (1 cement:

3 fine sand) including rounding off corners wherever requir...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and laying Vitrified tiles with thickness 9-10 mm in different

sizes with water absorption less than 0.08 % and conforming to I.S. 15622,

of approved make, in all colours & shade, over 12 mm...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ti...

Providing and fixing double glazed hermetically sealed glazing in aluminium

windows, ventilators and partition etc. with 6 mm thick clear float

glass both side, having 12 mm air gap, including providi...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to steel...

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Providing Honne wood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal

frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing Steel work welded in built up sections/ framed

work, including cutting, hoisting, fixing in position and applying a priming

coat of approved steel primer using structural steel et...

Providing and laying water proofing treatment to the Roof with PU based

single component elastomeric pure polyurethane based coating on New

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing of Aluminium composite panel of approved make and

colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams

with necessary aluminium frame works at required level made o...