SPECIAL REPAIRS TO BUILDING NOS T-288, T-289 AND T-20 SINGLE OFFICERS LIVING ACCN AT 5 MTN DOU SPECIAL REPAIR FOR 18X OR TOILETS AT BLDG NO-LT-111 AND LT-112, TB-1, TB-2 AND B-113 BATHROOM WITH COMPLETE WIRING, LIGHTING, WATER STAGGING WITH 20

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings any thickness

S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 120 gsm.

S&F 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade or zinc coating 120 gsm.

M&L for two coat of synthetic enamel roof paint over new surfaces zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described over 10 cm width or girth.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level)

M& L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in path/pavings finished rough and laid in alternate bays to receive chequered tile all as specified and directed

M&L for 40mm thick PCC 1:2:4 type B1 (using 20 mm graded stone agregate) as in floorings, sqm including finishing the surface even and smooth using extra cement

M& L for 25MM thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in floorings, as in sub base of floor tiles in ground floor tiles in ground floor complete all as specified

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles .

M&L for 15 mm thick screed bed in CM 1:6 incl roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. to receive chequered tiles etc.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M&L for chequrred cement concrete tile 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors, with grey cement and pigment

Taking down, hearth or wall tilling including cement mortar bedding (but not backing), hacking for key, scrubbing down with water etc.

M&L for 10mm thick rendering in CM 1:4 finish even and fair for laying wall tiles.

M&L for 300 x 200 x 6 to 7 mm thick glazed coloured ceramic tiles on vertical surface of wall and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade (Make : Kajaria/ Orient/ Bell/ Johnson/ Somany).

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key , scrubbing down with water etc

M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement

M & L for 15mm thick plaster in cement mortar 1:4 on brick on concrete surfaces using WPC and finishing the surfaces even & smooth without using extra cement (WPC will be measured and paid separately)

Supply only Liquid water proofing compound

M&L for 75mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection surface finishied even and smooth using with extra cement

Dismanting of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings

S& F PVC (SWR) pipes single socketed 110mm bore in any length with rubber rings joints fixed to walls

S& F PVC (SWR) pipes single socketed 75mm bore in any length with rubber rings joints fixed to floor

S & F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore

S&F PVC (SWR) bends any radius, 110mm bore

S&F 110mm PVC (SWR) 'p' trap

S & F PVC (SWR) vent cowl 110mm bore

S & F PVC (SWR) couplers 110mm bore

S & F PVC (SWR) WC Connector 110mm bore lip ring

S & F PVC connections 15mm Size with PTMT nuts of length 450mm

Supply and fixing in repair viterous China squatting pan"Orissa" patternt size 580X440mm, white (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and complete

S&F in vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and TPH and to flushing pipe etc complete all as specified

S&F vetreous china wash hand basin white flat back of size 550mm x 400mm including cutting for and pinning in end of brackets 32mm waste fittings brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed and flush pipe of polytethylene of low or high density or PVC 32 mm dia

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and branckets etc complete (Make : Hindware / Parryware/ Cera/ Commader)

Supply and fixing in repairs 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

S&F in repair 15 mm dia stop valve external threaded, Brass, cast coppper alloy ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for uninos .

S&F in repair 15mm bore chromium plated fancy type stop cock with long shank and cup (concealed type)

S&F in repair brass chromium plated shower rose 125 mm dia with swivel joints including fixing to steel pipe or union

Supply and fix brass CP fancy type pillar tap,for wash hand basin screwed for iron pipe 15 mm bore,complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including clfor refixing or removal to store

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

Taking up or down 20mm bore steel water tubing and connections including cleaning or refixing or removal to store

Supply and fixing 20mm bore steel water tubes, medium grade, glavanised with all fittings and fixed complete to walls/ceilings or laid in trenches

Dismantiling of water tanks exc 250 ltrs & n.exc 500 ltrs capacity and removing to store.

S&F PVC water storage tanks of 500 ltrs capacity rotatinal moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm in each.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

Taking down shutters or any description exc 1 sqm but n.exc 2 sqm each

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rain, lcok & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supling & fixing in the frame at site as per specification & drawing.

S&F 2nd class hard wood plain framed panelled shutter 35 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, guaze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc

S&F 25mm thick flush sutter, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.

S&F 100mm size mild steel butt hinges medium weight cold rolled and fixed

S& F Mild steel barrel tower bolts 200mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S&F 150mm size Mild steel pressed handles, oval type, stove enamelled black

S&F 150mm size Aluminium anodised handles, cast type.

Dismantling timber filiets rail rafters, purlins etc under 40 sq cm in section

M&L for 2nd class Hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm

Dismantling wooden scantling

M& L second class hard wood in scantlings

Dismantling of wall and ceiling board or insulation boards/slabs/blankets/any thickness including cover fillets.

M&L for 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces

M&L for 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces

M & L for 6 mm thick plywood grade BWR, type BB, fixed with nails to timber framed work on wall surface

M & L for 6 mm thick plywood grade BWR, type BB, fixed with nails to timber framed work on ceiling surface.

Dismantling boarding any description fixed in any position with nails

M & L for 50 mm thick II nd class Hard wood clean sawn boarding with but joints fixed with nails in any situation.

S&F galvanised mild steel wire cloth 0.36mm nominal dia of wire and average with aperture 1.4mm and fixed stainless steel wire staples

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average with aperture 1.18mm and fixed stainless steel wire staples

Supply and Fixing 3mm thick figured glass, pin head glazing with oil putty/wooden beads in squares not exceeding 0.50 Sqm in each pane

Supply and Fixing 3mm thick annealed glass, glazing with oil putty/wooden beads in squares not exceeding 0.50 Sqm in each pane

Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar

M & L for PCC 1:3:6 type C-1 (20mm graded aggregate) precast cement concrete block masonary with solid blocks exc 10cm in width and setting in CM 1:6 etc complete

M & L for PCC 1:2:4 type C-1 (20mm graded aggregate) precast cement concrete block masonary with solid blocks exc 10cm in width and setting in CM 1:6 etc complete

Mild steel TMT bars 10mm dia, and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia. Or securing with clips

M and L for form work to chullah hoods, chajjas, troughs and similar items including edges with fair finish flat surfaces

Demolition of reinforced cement concrete of any kind in any position.

M & L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) for slabs supported on walls beams and coloumns in floors roofs landing and in shelves chajja's and the like complete with all necessary formwork etc all as specified and as directed

M&L for Preparing old plastered surfaces of walls and applying one coat of white wash.

M&L Preparing new plastered surfaces of walls and applying two coat of white wash.

M&L for applying two coats of synthetic eanmel paint over a coat of red oxide primer to newly steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces

M& L for applying one coat of synthetic enamel paint to old steel and iron surfaces of any description over 10cm in width or girth not otherwise described including preparation of old steel surfaces

Complete removeal of existing treatment and applying two coat of OBD on wall surface complete all as specified.

M&L for two coat of synthetic enamel paint over a coat of pink primer on new wdn surface of any description, not otherwise described, over 10cm width or grith

Taking down point wiring carefully copper/ aluminum (light, fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the distrub surfaces/ portion of the wall etc all specified and directed by EIC.

Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ ceiling etc complete all as specified and directed by EIC.

M&L for point wiring with 1.5 sqmm (nominal area), two single core PVC insulated unsheathed 1100 volts grade, multi stranded copper conductor in and including PVC casing capping of adequate size with all fittingsand acessories including PVC board with top cover housing/ mounting brackets switches, sockets etc, including PVC insulated unsheathed single core multi stranded copper conductor cable of size 1.0 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/ fan point controlled by one way switch complete all as specified and directed.

All as per item ser No 89 here in before but one exhaust fan point

All as per item ser No 89 here in before but one call bell point

All as per item ser No 89 here in before but one 5 amp socket outlet three pin control by switch on the same board complete all as specified and directed

All as per item ser No 89 here in before but one 5 amp socket outlet three pin control by one switch on independent board complete all as specified and directed

All as per item ser No 89 here in before but for 3 pin 15 Amps socket outlet independent board drawn from DB and including PVC insulated multi stranded copper conductor 4 sqmm 1100 volts grade and wire earth continuity wire 1.5 sqmm PVC insulated copper wire (Green) including PVC casing and capping complete all as specified and as directed

S& F switch piano flush type single pole one way 5 amp 240 volts all as specified and directed

S&F for switch socket combination 2 in 1, 5 pin 5 amps flush type 240 volts all as specified and directed

S&F for switch socket combination multipurpose 15 A flush type, 5 in 1, 240 volts all as specified and directed

S&F Bell push, flush type, 5 Amp

S&F Bell ding dong type, AC, 240 Volts, single pole

S&F Ceiling rose, surface bakelite, 65x50mm, two to three terminals AC, 230 V complete all as specified and as directed

S&F lamp holder insulated body PVC/polycarbonate type with back plate for batten fitting with one PVC block of complete all as specified and directed.

S&F 1 x 15 watt LED lamp complete all as specified and directed. Cat No. LHLDEREEMK8 X 015, Make - Havells

Supply and Fixing Energy saving new generation 10 W LED IP65 bulk Head luminaire with opal diffuser with LED Lamp (10 W LED 6000K) and all accessories and including connecting up with twin core twisted with flexible copper conductor cable with suitable size of 230V, 50hz complete all as specified and directed. Model- ENDURA RUGBY, LHEOAOP7UZ6W010, Make - Havells

S&F sheet metal enclosure for DBs SPN 8 way, with 200 amp rated bus bar Double door complete all specified and directed

S&F sheet metal enclosure for DBs SPN 4 way, with 200 amp rated bus bar Double door complete all specified and directed

S&F MCB SP 6 to 32 Amp 240 Volts

S&F MCB SPN 40 Amp 240 Volts

S&F wire for circuit / sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with stranded copper conductor 4 Sqmm on surface or recessed or drawn in PVC casing capping along with 2.5 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed (Note : One RM PVC casing capping one run of 2.5 sqmm earth wire and 2 Run of 4 sqmm cable shall be measured as one run).

Material & Labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5 mtr below the normal ground level connected to galvanized wire 4mm dia by means of bolts, nuts, check nuts and washers of gavanised iron. Earth wire protected by GI pipe 15 mm bore (medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40 cm x 5 cm reinforced with 8 mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

Supply and Fixing Endura Linear Neo 20 Watt wall mounted LED batten, extruded AI, heat sink, provided for efficient heat dissipation & intergrated electronic driver including LED rod making electric connection from ceiling rose to tube light fitting complete all as directed in Engr in charge. Make- Havells, Cat No. LHEWEBP5IN1W020

S & F wire circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with stranded copper conductor 10 Sqmm on surface or recessed or drawn in PVC casing capping along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed

S & F in repairs Rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and all as specified in SSR Part I capacity 2000 Ltrs

M/S SUNRISE CONSTRUCTION AND CO

M/S SM ANSARI

M/S ASHOK CONSTRUCTION

M/S R.N ENTERPRISE

M/S DK TRADERS

M/S RD TRADERS