NIT No. 20 (22-23) Item No. 1

Dismantling of old pump set & foundation and cutting rusted nut bolt with the help of gas cutter, pneumatic hammer and heavy/ manual labour and shift the old pump set with foundation from site to loni road store.

Supply Horizontal centrifugal pump suitable for Clear water having 40 mtr. Head, discharge 55-70 m3/hr. C.I. impeller, S.S./C.S. Shaft & sleeve, 980-1450 RPM suction/delivery size: 80/65 & 100/80. minimum efficiency of the pump shall be 65-85%, the pump coupled with 14.91kw/20HP induction motor, 3 phase, TEFC IE2 415 Volts, AC supply, 970-1450 RPM, mounted on M.S. common base frame with flexible coupling & guard. Make:- Kirloskar/lubi/Wilo/Jyoti/ DJB approved.

Providing and laying in position reinforced cement concrete 1:2:4 (1Cement: 2 Coarse: 4 graded stone aggregate 20 mm nominal size) in foundation of pumps and also making arrangement for fixing of 20HP pump set MS base frame as per requirement.

Supply of Open well submersible Dewatering pump set 2 HP, Ac, 2900 RPM, (M-120/2HP) Make:- Mody/Any DJB approved SOR (E&M) item code 2.1.2

Dismantling of old damaged pipes by cutting damaged nut bolt with the help of gas cutter, pneumatic hammer and heavy/ manual labour without damage existing structure. Also shift the old material from site to loni road store.

Supply/laying of 125mm dia. B class GI pipe length 3 Mtr. On suction and delivery side With duly Welded and threaded flange in both sides, complete with cutting of flange for cable and welded support in both flanges as per site requirement. ISI Mark (Payment will be made as per Actual) Make: - Jindal/ Parkash/ Surya/Tata/Jindal Hisar/Jindal Ghaziabad.

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 125 mm Make: - Kirloskar/IVC/ DJB approved

Supply of CIDF swing type Non return valve as per IS 5312 (Part 1&2), PN 1.0, size 125 mm. Make: - Kirloskar/IVC/ DJB approved

Supply of Nut- Bolt with washer of good quality size as per requirement and nut bolt for foundation also as per size required. ISI Mark. (Payment will be made as per Actual).

Supply of rubber packing sheet with 50 % Neoprene (1.5 mm to 25 mm) ISI Mark. (Payment will be made as per Actual). SOR (E&M) item code 22.6.1

Installation, erecting, testing, and commissioning of the above said equipment's/ accessories with all sundry equipment's, fittings, assemblies, accessories, paint on MS structure, hardware items, bolts, supports, termination lugs for electrical connections, cable glands, junction boxes, and other items for proper assembly and installation of the various equipment's and components of the work shall be deemed to have been included. The work also includes necessary required items for completion of work i.e. flanges, MS bends, MS Pipe, eccentric tapers, rubber gaskets, foundation bolts, construction of thrust block, necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement, loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions.

ASHMITA ENGINEERS AND TRADERS

MK ENGG.CO.