Interior and Fit-out works in office space of National Internet Exchange of India (NIXI) at B-901, 9th floor, Tower-B, World trade Centre, Nauroji

S no Description Amount DSR Amount Non DSR

2 ELECTRICAL WORKS 74,39,116.36 14,80,192.00

3 LIGHTING 19,00,390.00

4 ACCESS CONTROL 8,48,937.00

6 NETWORKING 12,83,316.00

8 PLUMBING WORKS 29,121.25 4,60,103.00

11 INTERIOR WORKS 1,82,18,486.04

12 LOOSE FURNITURE 95,50,963.00

13 ART AND ACCESSORIES 12,95,402.50

14 LANDSCAPE 5,80,840.00

15 LOGOS AND SIGNAGES 1,57,915.00

TOTAL (DSR+NON DSR) 5,93,46,941.26

Digitally signed by SAKET

Sno Item DSR 2023 (Civil) Description Quantity Unit Rate/unit Rate/unit Total Total

(DSR) (NON DSR) (DSR) (NON DSR)

1 DEMOLITION WORKS

1.1 DSR-15.7.4 Demolishing brick work manually/ by mechanical means -

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction

of Engineer-in-charge.

In cement mortar 2 Cu m 2060.20 0.00 4,120.40

1.2 DSR-15.12.2 Dismantling doors, windows and clerestory windows (steel or -

wood) shutter including chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead :

Of area beyond 3 sq. metres 2 Nos 502.75 0.00 1,005.50

2 CONSTRUCTION WORKS

2.1 DSR-6.38 Providing and laying of autoclaved aerated concrete (AAC) 7 Sq mts 10195.45 0.00 71,368.15 -

blocks masonry 100mm/125mm thick with grade-1 AAC blocks

of density 551to 650 kg/cum conforming to IS:2185 (part3) in

super structure above plinth upto level floor V level in cement

mortar 1:4 (1 cement: 4 coarse sand). the rate includes

providign and placing in position 2 nos 6 m dia MS bars at

every third course of masonary work.

2.2 MR Providing and fixing of continous concrete lintel of 15 Rmts 0.00 3551.00 - 53,265.00

100mmx100mm at 8' level wherever necessary. Rate to include

shifting of material and all lead, lift and scaffolding.

2.3 MR Providing and applying of cement plastering wherever 150 Sqmts 0.00 994.00 - 1,49,100.00

necessary. Plastering to be in plumb and 90 degrees.Rate to

include shifting of material and all lead, lift and scaffolding.

2.4 DSR-4.1.8 Providing and laying in position cement concrete of specified 95 Cu mts 6812.00 0.00 6,47,140.00 -

grade excluding the cost of centering and shuttering- All work

upto plinth level

1:4:8 (1 Cement : 4 Coarse Sand (Zone-III) derived from natural

sources: 8 graded stone aggregate 40mm nominal size derived

from natural sources )

Digitally signed by SAKET

Sno Item DSR 2023 (Civil) Description Quantity Unit Rate/unit Rate/unit Total Total

(DSR) (NON DSR) (DSR) (NON DSR)

2.5 (DSR-6.38) Providing and fixing of 200mm step up flooring for CEO toilet 5 Sq mts 10195.45 0.00 50,977.25 -

made out of light weight filling. Filling to be finished with PCC

to level out the surface.

2.6 DSR-22.5 Providing and laying of water proofing treatment in sunken 12 Sq mts 617.05 0.00 7,404.60 -

portion of WC's bathrooms, etc by applying cement slurry

mixed with water proofing cement compound consisting of

applying:(a) first layer of surry of cement @0.488kg/Sqm mixed

with water proofing cement compound @0.253 kg / sqm. this

layer will be allowed to air cure for 4 hours. (b) second layer of

slurry of [email protected] kg/sqm mixed with water proofing

cement compound @.126kg/sqm. this layer will be allowed to

aircure for 4 hours followed by water curing for 48 hours. The

rate includes preparation of surface treatment and sealing of

all joints, corners, junctions of pipes and masonary with

polymer mixed slurry.

2.7 DSR-2.35.5 Diluting and injecting chemical emulsion for POST- 900 Sq mts 279.70 0.00 2,51,730.00 -

CONSTRUCTIONAL anti-termite treatment (excluding the cost

of chemical emulsion)

Treatment of points of contact wood work by chemical

emulsion Chlorpyriphos/Lindane (in oil or kerosene based

solution) @ 0.5 litres per hole by drilling 6mm dia holes at

downward angle of 45 degree at 150mm centre to centre

sealing the same

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

A Point Wiring

1 DSR - 2022 1.3 Wiring for light point/ fan point/ exhaust

fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor

single core cable in surface / recessed

medium class M.S. conduit, with modular

switch, modular plate, suitable GI box

and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor

single core cable etc. as required.

2 DSR - 2022 1.5 Wiring for light/ power plug with 2X4 sq. Metre 30 433 460.41 0.00 13,812.30 -

mm FRLS PVC insulated copper

conductor single core cable in surface/

recessed medium class M.S. conduit

alongwith 1 No. 4 sq. mm FRLS PVC

insulated copper conductor single core

cable for loop earthing as required.

3 DSR - 2022 1.6 Wiring for light/ power plug with 4X4 sq. Metre 30 662 703.9 0.00 21,117.00 -

mm FRLS PVC insulated copper

conductor single core cable in surface/

recessed medium class M.S. conduit

alongwith 2 No. 4 sq. mm FRLS PVC

insulated copper conductor single core

cable for loop earthing as required.

4 DSR - 2022 1.7 Wiring for circuit/ submain wiring

alongwith earth wire with the following

sizes of FRLS PVC insulated copper

conductor, single core cable in surface/

recessed M.S. conduit as required.

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

Total Carried Over To Summary 55,33,956.45 -

B Telephone Data Conduiting and Cabling

1 DSR - 2022 1.18 Supplying and drawing following pair 0.5

mm dia FRLS PVC insulated annealed

copper conductor, unarmored telephone

cable in the existing surface/ recessed

steel/ PVC conduit as required.

2 DSR - 2022 1.53 Supplying and drawing of UTP 4 pair CAT-

6 LAN cable in the existing

surface/recessed steel/PVC conduit as

3 DSR - 2022 1.20 Supplying and fixing of following sizes of

M.S. conduit along with accessories in

surface/recess including cutting the wall

and making good the same in case of

recessed conduit as required.

Total Carried Over To Summary 11,81,139.79 -

C Switch Plates

1 DSR - 2022 1.24 Supplying and fixing following moduler

type switch/ socket on the

existing moduler plate and switch box

including connections but excluding

moduler plate etc. as required.

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

1.6 DSR - 2022 1.24.6 Telephone / Data socket outlet Each 250 148 157.37 0.00 39,342.50 -

1.7 DSR - 2022 1.24.7 TV Antenna socket outlet Each 8 148 157.37 0.00 1,258.96 -

2 DSR - 2022 1.27 Supplying and fixing following size/

modules, GI box alongwith modular base

& cover plate for modular switches in

recess etc. as required.

Total Carried Over To Summary 3,13,190.62 -

D Distribution Boards

1 DSR - 2022 2.3 Supplying and fixing following way, single

pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/

recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted

including earthing etc. as required. (But

without MCB/RCCB/Isolator)

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

2 DSR - 2022 2.5 Supplying and fixing of following ways

surface/ recess mounting, vertical type,

415 V, TPN MCB distribution board of

sheet steel, dust protected, duly powder

painted, inclusive of 200 A tinned copper

bus bar, common neutral link, earth bar,

din bar for mounting MCBs (but without

MCBs and incomer ) as required. (Note :

Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

3 DSR - 2022 2.10 Supplying and fixing 5 A to 32 A rating, 0

curve, miniature circuit breaker suitable

for inductive load of

following poles in the existing MCB DB

connections, testing and commissioning

etc. as required.

3.3 DSR - 2022 2.13 Supplying and fixing following rating, four 0

isolator in the existing MCB DB complete

with connections,

testing and commissioning etc. as

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

4.0 DSR - 2022 2.14. Supplying and fixing following rating, 0

double pole, (single phase and neutral),

240 volts, residual current circuit breaker

(RCCB), having a sensitivity current upto

300 milliamperes in the existing MCB DB

complete with connections, testing and

commissioning etc. as required.

4.2 DSR - 2022 1.19 Supplying and drawing co-axial TV cable Metre 400 47 49.98 0.00 19,992.00 -

RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with

fine tinned copper braid and protected

with PVC sheath in the existing surface/

recessed steel/ PVC conduit as required.

4.1 DSR - 2022 1.41 Installation, testing and commissioning Each 464 206 219.04 0.00 1,01,634.56 -

of pre-wired, fluorescent fitting /

compact fluorescent fitting of all types,

complete with all accessories and tube

etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core

cable and earthing etc. as required.

Total Carried Over To Summary 2,83,157.98 -

E PANEL BOARD and CABLING

1 MR -1 Supplying, Installation, Testing and

Commissioning of wall Mounted dust &

vermin proof, front openable,

compartmentlised, cubical type panel

board made out of 1.6mm thick CRCA

sheet complete with powder coated

paint dark gray ect. as required. Main

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

b) Bus bar chamber with 4 Strip 250

Amp. Al. Bus bar suitable for inter

connections complete with screws an

PVC tapping ect.

i) 250A 415 Volt FP MCCB 25 KA WITH IN

BUILT E/F MODULE = 1 No.

ii) RYB INDICATION LIGHTS WITH

CONTROL MCB- 2 SETS

iii) ON/OFF/TRIP INDICATION LIGHTS

WITH CONTROL MCB- 1SETS

iv) MULTI FUNCTION METER WITH CTS- 1

v) 63 Amp. FP MCCB = 2 Nos.

vi) 63/40 Amp. FP MCB = 5Nos.

vii) 32 Amp. DP MCB =3Nos.

vii) Danger Plate (M.V.) = 1 Nos.

2 MR-2 Supplying, Installation, Testing and

Commissioning of wall Mounted dust &

vermin proof, front openable,

compartmentlised, cubical type panel

board made out of 1.6mm thick CRCA

sheet complete with powder coated

paint dark gray ect. as required. UPS

b) Bus bar chamber with 4 Strip 150

Amp. Al. Bus bar suitable for inter

connections complete with screws an

PVC tapping ect.

i) 125A 415 Volt FP MCCB 25 KA WITH IN

BUILT E/F MODULE = 1 No.

ii) RYB INDICATION LIGHTS WITH

CONTROL MCB- 2 SETS

iii) ON/OFF/TRIP INDICATION LIGHTS

WITH CONTROL MCB- 1SETS

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

iv) MULTI FUNCTION METER WITH CTS- 1

v) 63 Amp. FP MCCB 25 KA =2

3 MR -3 Supplying, Installation, Testing and

Commissioning of wall Mounted dust &

vermin proof, front openable,

compartmentlised, cubical type panel

board made out of 1.6mm thick CRCA

sheet complete with powder coated

paint dark gray ect. as required. UPS

b) Bus bar chamber with 4 Strip 100

Amp. Al. Bus bar suitable for inter

connections complete with screws an

PVC tapping ect.

i) 63A 415 Volt FP MCCB 25 KA = 2 No.

ii) RYB INDICATION LIGHTS WITH

CONTROL MCB- 2 SETS

iii) ON/OFF/TRIP INDICATION LIGHTS

WITH CONTROL MCB- 2SETS

iv) 32 Amp. DP MCB =10Nos.

4 MR-4 Supply and Laying of 3.5 Core 95 Sqmm Meter 110 0 0 731.00 - 80,410.00

PVC Insulated Aluminum Ar Cable

5 MR-5 Supply and Laying 3 Core 16 Sqmm PVC Meter 225 0 0 267.00 - 60,075.00

Insulated Aluminum Ar Cable

Total Carried Over To Summary - 5,03,265.00

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

1.1 DSR - 2022-5.2 Earthing with G.I. earth pipe 4.5 metre SET 6 6855 7288.92 0.00 43,733.52 -

long, 40 mm dia including accessories,

and providing masonry enclosure with

cover plate having locking arrangement

and watering pipe etc. with charcoal/

coke and salt as required.

1.2 DSR - 2022-5.11 Providing and fixing 25 mm X 5 mm G.I. Metre 50 706 750.69 0.00 37,534.50 -

strip in 40 mm dia G.I. pipe from earth

electrode including connection with G.I.

nut, bolt, spring, washer excavation and

re-filling etc. as required.

1.3 DSR - 2022-5.15 Providing and fixing 25 mm X 5 mm G.I. Metre 110 244 259.45 0.00 28,539.50 -

strip on surface or in recess for

connections etc. as required.

1.4 DSR - 2022-5.18 Providing and fixing 6 SWG dia G.I. wire Metre 400 42 44.66 0.00 17,864.00 -

on surface or in recess for loop earthing

along with existing surface/ recessed

conduit/ submain wiring/ cable as

1.5 MR-6 Supplying and drawing 16 Sqmm FRLS Metre 500 0 0 302.00 - 1,51,000.00

PVC insulated copper conductor, cable in

the existing surface/ recessed steel/ PVC

conduit as required.

Total Carried Over To Summary 1,27,671.52 1,51,000.00

Digitally signed by SAKET

ELECTRICAL WORKS

S.No. DSR NO. Description Unit Qty. DSR Rate DSR enhanced rate

@ 18% DSR Amount NON DSR Amount

1.1 MR-7 Supply ,Installation, Testing and Nos 1 0 825927 - 8,25,927.00

Commissioning of 60kva UPS SYSTEM

with each UPS having 15min battery

backup, along with rack for batteries,

necessary connectors, racks , wiring and

5m dc cabling required between

batteries and UPS . The UPS will conform

to the technical specifications.The UPS

alongwith batteries will be run on full

load to check the adequacy of capacity of

batteries before accepting the work.

Total Carried Over To Summary - 8,25,927.00

TOTAL TO SUMMARY 74,39,116.36 14,80,192.00

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

1 DOWNLIGHTERS

Supply, Installation, Testing and Commissioing of Recessed downlightwith 180 Nos 1788.00 3,21,840.00

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system

efficacy, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours;

energy-efficient LEDs, direct light emission, housing in die-cast aluminium,

Polyester powder white coloured coat applied over a 5-stage pre-treatment

trim, prismatic diffuser for homogenous light distribution, ZHLS (ZERO

HALOGEN LOW SMOKE) wiring, Electronic control gear, Protection class II, IP

Supply, Installation, Testing and Commissioing of Pendant/Recessed 100 Nos 8080.00 8,08,000.00

luminaire with LED (Light Emitting Diode), system power 30 W, luminous

flux of luminaire 3080 lm, 110 LM/W system efficacy, direct light emission

CRI>80, colour temperature of 4000K, Neutral white, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours, energy efficient

LEDs, luminaire profile in aluminium, Plastic moulded end caps, Polyester

powder Aluminium white coloured coat applied over a 5- stage pre-

treatment, high efficiency glare-free snap fit micro-prismatic diffuser for

homogeneous light distribution, ZHLS (Zero Halogen Low Smoke) internal

wiring, integral Electronic control gear, adjustable suspender, Protection

class I, IP 20, L = 1199 mm, B = 50 mm, H = 75 mm, PL max = 1500 mm .

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

Supply, Installation, Testing and Commissioing of surface mounted 150 Nos 4243.00 6,36,450.00

downlightwith HPE (High-Performance Efficiency) with LED (Light Emitting

Diode), system power: 18 W, Luminous flux of luminaire 1320 lm, 110 LM/W

system efficacy, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours;

1.3 energy-efficient LEDs, direct light emission, housing in die-cast aluminium,

Polyester powder white coloured coat applied over a 5-stage pre-treatment

trim, prismatic diffuser for homogenous light distribution, ZHLS (ZERO

HALOGEN LOW SMOKE) wiring, Electronic control gear,

Protection class II, IP 40. Make of light fitting wipro/philips

Supply, Installation, Testing and Commissioing of continuous strip with HPE 150 Rmts 894.00 1,34,100.00

(High-Performance Efficiency) with LED (Light Emitting Diode), system power:

, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant

current driver for every 5mts , 70% of luminous flux after 50,000 operating

hours; energy-efficient LEDs, direct light emission, housing in die-cast

aluminium, Polyester powder white coloured coat applied over a 5-stage pre-

treatment trim, prismatic diffuser for homogenous light distribution, ZHLS

(ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear, Protection

class II, IP 40. Make of light fitting wipro/philips

Digitally signed by SAKET

SCHEDULE OF QUANTITIES: ACCESS CONTROL

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

SITC, Card Reader ,Highly Versatile — Support for the widest range of

credential technologies, including HID Mobile Access via native Bluetooth

and Near Field Communication (NFC) capability. Also features Apple’s

Enhanced Contactless Polling (ECP) to support credentials in the Apple

Enhanced Performance — Storage of cryptographic keys on certified

secure element hardware, plus a new surface detection feature that

allows the reader to automatically recalibrate and optimize read range

Connected to the Future — All readers include out-of-the-box support for

Open Supervised Device Protocol (OSDP) for secure bidirectional

communication. Each reader is also designed to be connected and

managed remotely without “sneakernet” or the need to be physically

SITC, Enclosure This enclosure has been produced in accordance with

strict guidelines and is used for securely mounting and

housing the AMC2 and a power supply.

Quantity Component

1 Housing with single din rail

1 Power supply unit and pre-assembled cables

1 Installation description

Technical specifications

Mechanical Properties

Dimension (W x H x D) 400 mm x 400 mm x 94 mm

Power Supply Unit Properties

Input Voltage 100 – 240 VAC, 50/60 Hz

Input Current 1.5A

Output Voltage 13 VDC

Output Current @ 13 VDC

(Min. / Rated / Max.)

Output Current for Battery

Charging @ 13 VDC Bat+

(Min. / Rated / Max.)

Temperature (Operating) 0 °C – 50 °C

Humidity 5% – 85% ±5% RH, noncondensing

Power Consumption (AMC) 5 VA

SITC , Network Controller access controller in the access control systems

ACE (ACCESS ENGINE) from version 2.0 onward, Access Personal Edition,

and Access Professional Edition. The device controls a group of one to

eight access points. These access points, also known as entrances, mainly

consist of doors, gates, barriers, turn stiles, revolving doors, mantraps, ID

card readers, door opening elements and sensors. The AMC2 can control

up to eight ID card readers (depending on the reader type) and is

designed for fully processing the access logic at the assigned entrances.

Status checks can be carried out using the eight analog inputs. The eight

relay outputs are used to activate the door opening elements and/or

generate the security activation and signaling. The AMC2 stores all

necessary information in a battery-buffered memory and a compact flash

storage element so that, even when the unit is offline, it is able to carry

out independent authorization checks on access points, take access

decisions, control closing/opening elements and register movement

events. The AMC2 4W-NET-CF Four Wiegand card reader interfaces,

network connection to the host system and Compact Flash memory (2

Intelligent access manager for one to eight entrances

Four interfaces include the reader power supply

Standard 2 GB compact flash

LCD display for displaying information

Self-controlling send and receive switching

SITC, EM LOCK-FOR GLASS DOOR WITH BRACKET( FEEDBACK FEATURE)

With power Supply

300lbs EM locks were designed to meet fire/life safety

4 applications by providing an auxiliary locking mechanism that has Nos 6 4,347.00 26,082.00

no moving parts to bind or wear out for trouble free operation. This

will ensure inhibited release at all times where they have become

extremely prevalent in applications other than fire/life safety

Supply and commissioing of MIFARE; I Class card formats. Supports 16

card formats per active reader, 8 per offline reader; entire card number

reported on invalid read; 19 digit (32/64-bit) User 10 and 15 digit PIN

numbers maximum; PIV, CAC, TWIC card compatible; 255 Access Levels

per cardholder;

Digitally signed by SAKET

Supply Installation Testing & Commissioning of Access Control Software

Multi Reader and controller confuguration and upgradable to Enterprise

level with unliimited users. Databse Supports: MS SQL, Oracle, and MS

Access database types. Type of technology supports: IRIS Sacnner,

Biometric, Face, RFID , etc supports template management , Highly

secured communication with server,Allows for real- time monitoring of

system status and user activities with optional audio alerts. tamper

detection, network communication loss, and many other system

attributes, with the required attendance features

Supply Installation Testing and Commissioning of Cat 6 Network cable.

Supplying and fixing of following sizes of medium class PVC conduit along

with accessories in surface/recess including cutting the wall and making

good the same in case of recessed conduit as required

Total in INR 0.00 8,48,937.00

Digitally signed by SAKET

SCHEDULE OF QUANTITIES: EPBX

S NO DESCRIPTION UNIT QUANTITY RATE

SITC, NEC SV 9100 IP TELEPHONIC COMMUNICATION SERVER 96 ANALOGE + 16 DIGITAL

CONNECTIONS WITH COMPLETE INSTALLATION INCLUDING 30 CHANNEL SIP/ISDN

1 TRUNK/ EXTEN. LICENSES, VOIP & OTHER REQUIRED ASSOCIATED LICENSES WITH Nos 1 3,44,172.00 3,44,172.00

INSTALLATION THROUGH PATCH PANEL WITH VOICE NETWORK ACCESSRIES

COMPLETE IN ALL TERMS

SITC, Key Telephone System 24 24-Button Black Digital Telephone for Univerge 9000

System Platforms.

Monochrome, 168x58 dots LCD

12-button (fixed) version

24-button version (up to 32 with key extension unit)

Backlit LCD & keypad

Multi-colour (7) Message Waiting Indicator

Tilt ange (5 steps)

Hands-free, full duplex

Headset jack (RJ9)

Soft keys/LCD prompts

Navigation cursor & Directory dial key

Wideband audio support

Choice of black & white models

3 DSS CONSOLE 60KEY Nos 1 13,438.00 13,438.00

Supply Installation, Testing and Commissioning of Analog Speaker TELEPHONE

INSTRUMENT SPEAKER WITH CALLER ID LARG DISPLAY & MEMORY KEY

Digitally signed by SAKET

SCHEDULE OF QUANTITIES: Networking

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

STIC, Acesspoint Wi-Fi CERTIFIED 6™ program is designed to ensure

that Wi-Fi 6-capable devices meet the highest standards for security and

interoperability. Wi-Fi 6 certification guarantees high-speed and

1 advanced features like orthogonal frequency division multiple access Nos 12 38,418.00 4,61,016

(OFDMA), downlink multi-user multiple-input multiple-output (MU-MIMO)

technology, and the next generation of Wi-Fi security, WPA3. (AP-22)

SITC ,6 keystone jacks are RJ45 8P 8C 50u jacks suitable for 22-26

AWG stranded and solid wire, compatible with both 110 & Krone punch

2 down tools. They are available in universal labels color coded for T568A Nos 150 662.00 99,300

and T568B wiring schemes and fit in high density keystone patch panel.

Supply Installation Testing and Commissioning of Cat 6 Network cable.

Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required

Total in INR 12,83,316.00

Digitally signed by SAKET

SCHEDULE OF QUANTITIES: AV & VC

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

SITC,86 Inch Commercial Display Visuals to behold the 4K: Excellent image quality with

4K resolution and anti-glare technology coupled with wide-viewing angles results in

displays perfect for meeting rooms and signage applications.

Resilience to work ceaselessly: Professional grade IPS panel ensures high reliability and

smooth performance for 24/7 operations.

Compatibilities to Expand: OPS slot enabled high resolution displays for seamless

connectivity and interoperability across systems.

In-built HTML5 browser

HDMI CEC Device Linking Supported: HDMI-CEC compatible device can be connected to

the display by an HDMI cable, enabling the basic operation (such as power ON/OFF) of

1 the compatible devices to be controlled by the display’s remote control. Nos 1 3,56,744.00 3,56,744.00

Wireless connectivity

USB autoplay: Simply insert a USB Memory stick containing video or still image content

into the main unit for automatic playback in file sequence (number, alphabet sequence)

Auto-launch browser

Inbuilt content scheduler for single display: Use the Remote Control to edit the playlist.

Use the main unit’s remote control to set the playback sequence and playback time for

the content saved onto the USB Memory stick to edit the playlist. Use the enclosed

remote control to set the playback sequence and time.

SITC, 86 Inch Inetractive Pannel With Widows 10 OPS 86", 4K Multi touch interactive

display, 450 cd/m2, built in Mali470 MP3 GPU, CA55 Quad core CPU and Android Pie 9.0,

2GB Memory, 8 GB storageBuilt in Wifi & Bluetooth, 2x20 W - Front Facing Speakers,

Continuous Touch Points: 20 Points: Windows,10 Points: Android Rear port terminals: 4

x HDMI IN, 1 x VGA, 2 x USB 2.0 Type A, 1 x USB 2.0 Type C, 1 x Micro SD, 1 x secure slot

(USB 2.0), 1 x OPS slot (15W), 1 x HDMI Out, 1 x RJ45. Front Port Terminals: 2 x USB2.0

Type-A, 1 x USB2.0 Type-B for touch, 1 x HDMI2.0 Input

SITC, 65 Inch Interacive Pannel With Windows 10 OPS Interactive Flat Panel is a 4k HD

touch panel with built-in high-quality speakers. That are large format touch panels to

enhance the overall functionality of a classroom, meeting room, conference hall and

virtual studio in terms of collaboration, interactivity and audio-visual effects. Interactive

Flat Panel is like an oversized tablet that offers you all the applications (browser,

annotation software, teaching apps, etc.) on finger tips. .

SITC,75 Inch Interacive Pannel With Windows 10 OPS Interactive Flat Panel is a 4k HD

touch panel with built-in high-quality speakers. That are large format touch panels to

enhance the overall functionality of a classroom, meeting room, conference hall and

virtual studio in terms of collaboration, interactivity and audio-visual effects. Interactive

Flat Panel is like an oversized tablet that offers you all the applications (browser,

annotation software, teaching apps, etc.) on finger tips. .

SITC,65 Inch Commercial Display Visuals to behold the 4K: Excellent image quality with

4K resolution and anti-glare technology coupled with wide-viewing angles results in

displays perfect for meeting rooms and signage applications.

Resilience to work ceaselessly: Professional grade IPS panel ensures high reliability and

smooth performance for 24/7 operations.

Compatibilities to Expand: OPS slot enabled high resolution displays for seamless

connectivity and interoperability across systems.

In-built HTML5 browser

HDMI CEC Device Linking Supported: HDMI-CEC compatible device can be connected to

the display by an HDMI cable, enabling the basic operation (such as power ON/OFF) of

5 the compatible devices to be controlled by the display’s remote control. Nos 3 1,54,791.00 4,64,373.00

Wireless connectivity

USB autoplay: Simply insert a USB Memory stick containing video or still image content

into the main unit for automatic playback in file sequence (number, alphabet sequence)

Auto-launch browser

Inbuilt content scheduler for single display: Use the Remote Control to edit the playlist.

Use the main unit’s remote control to set the playback sequence and playback time for

the content saved onto the USB Memory stick to edit the playlist. Use the enclosed

remote control to set the playback sequence and time.

Digitally signed by SAKET

SITC,75 Inch Commercial Display Visuals to behold the 4K: Excellent image quality with

4K resolution and anti-glare technology coupled with wide-viewing angles results in

displays perfect for meeting rooms and signage applications.

Resilience to work ceaselessly: Professional grade IPS panel ensures high reliability and

smooth performance for 24/7 operations.

Compatibilities to Expand: OPS slot enabled high resolution displays for seamless

connectivity and interoperability across systems.

In-built HTML5 browser

HDMI CEC Device Linking Supported: HDMI-CEC compatible device can be connected to

the display by an HDMI cable, enabling the basic operation (such as power ON/OFF) of

6 the compatible devices to be controlled by the display’s remote control. Nos 1 4,11,628.00 4,11,628.00

Wireless connectivity

USB autoplay: Simply insert a USB Memory stick containing video or still image content

into the main unit for automatic playback in file sequence (number, alphabet sequence)

Auto-launch browser

Inbuilt content scheduler for single display: Use the Remote Control to edit the playlist.

Use the main unit’s remote control to set the playback sequence and playback time for

the content saved onto the USB Memory stick to edit the playlist. Use the enclosed

remote control to set the playback sequence and time.

SITC , Vedio Confernce Bar an all-in-one USB conferencing device that brings premium

audio and video to small meeting areas —

from huddle spaces to medium-sized rooms. Be seen clearly. Be heard and understood

fully. Six beam-steering microphones

automatically focus on voices in the room and reject noise. A 4K ultra-HD camera with

autoframing delivers crystal-clear

7 video, helping remote participants feel like they’re in the room. Proprietary Bose Nos 5 1,90,382.00 9,51,910.00

Professional sound supports multimedia

presentations, plays Bluetooth® audio, and ensures voices on the call sound natural.

Single-cable connectivity means there’s

no need for separate audio and video cables at the table, reducing clutter. Whether it’s a

quick morning check-in or a fullafternoon workshop, the Videobar VB1 helps you huddle

up, see more, hear more, and work better.

SITC, USB Extension Cable USB 3.1 Gen1 Extender Cable allows users to extend the

distance between the computer and USB devices up to 10 m. The UE3310 provides a

reliable, high performance data transmission that utilizes USB 3.1 Gen1 data bandwidth

up to 5Gb/s and also backward compatible with USB 2.0/1.1 standard. It’s plug and play

8 and no additional software installation required, easy to deploy and operate on the Nos 5 20,856.00 1,04,280.00

The UE3310 provides a quick and high quality cost effective solution for all kinds of

professional environments like: hospitals, factories, or business facilities.

SITC of 10MTR HDMI Cable 8 Gbps bandwidth, ultra high speed HDMI cable

Maximum Resolution: 4K120/8K60/10K

Color Depth: 8-16 bit

9 Core Material: Silver-plated, oxygen-free copper Nos 5 10,976.00 54,880.00

Color: Red cable head with white lettering, black jacket

Certifications: RoHS, UL Listed CL2, CE

SITC , Cable Cubby cable cubby has a lid that can be opened with a push button and can

accommodate multi-format cables

Intuitive Use-pull the cable for use and drop back into the cable manager

10 Comes with 6 pass through slots with one slot per cable Nos 5 39,517.00 1,97,585.00

The Multi format cable comes with 1.8m and has Male to Female cables

Designed for perfect integration into the office furniture

The product is made of steel and aluminium

SITC, Wall Mount Speakers With coaxial two-way drivers, the 125-watt Bose

Professional DesignMax DM6SE loudspeaker offers rich lows and clear, intelligible highs

— along with premium aesthetics that complement any commercial sound installation.

The DM6SE features a 6.5-inch woofer and a 1.25-inch coaxial tweeter mounted within

the Dispersion Alignment system, delivering a frequency range of 59 Hz – 20 kHz.

SITC, Power Amplifier The versatile PX series power amplifiers lineup combines

12 intelligent processing with high output power to meet the requirements of a vast range Nos 3 48,372.00 1,45,116.00

of sound reinforcement environments. 300W x 2 at 8Ω / 500W x 2 at 4Ω.

SITC Mixing Console 10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (4 mono + 3

stereo) / 1 Stereo Bus / 1 AUX (incl. FX)

SITC Pre Amplifier Wired and wireless network connection & rich audio interfaces.

Supports 192k/24-bit Hi-Res audio, AirPlay 2, Chromecast Audio, Spotify Connect, Tidal

Connect, and more.

Voice control with Alexa, Google, and Siri Voice Assistants.

15 SITC ,Connector Lot Nutric XLR to Female XLR Nos 10 2,325.00 23,250.00

Digitally signed by SAKET

SITC PTZ Camera 4K Network PTZ Conference camera with 12x optical zoom & 80-

degree horizontal coverage. Low Noise CMOS 4K image sensor with User-configurable

resolution and quality for IP streams (up to 1080p). HDMI resolutions up to 4K30 and SDI-

3G resolution up to 1080p60. Image rotation controls to allow for inverted mounting

using ceiling bracket. Minimum Illumination - 0.5 Lux @ (F1.8, AGC ON), Horizontal

Rotation Range - ±170°, Vertical Rotation Range - -30° to +90°, White Balance controls-

Auto, indoor, outdoor, one-push, manual, specified color temperature. Power – PoE &

AUX. Wall mounting bracket included.

SITC TCCM In-Ceiling Microphone

Ceiling Microphone tile with 15 built-in microphones

SITC, Processor 64 x 64 networked audio channels (Q-LAN / AES67)

8x on-board Flex channels and GPIO

8x AEC processors

up to 32 x 32 Dante audio channels (8 x 8 included)

19 SITC, UCI and Scripting License Nos 1 55,814.00 55,814.00

SITC,InCileing Speaker With coaxial two-way drivers, the 125-watt Bose Professional

DesignMax DM6C loudspeaker offers rich lows and clear, intelligible highs — along with

premium aesthetics that complement any commercial sound installation. The DM6C

features a 6.5-inch woofer and a 1.25-inch coaxial tweeter mounted within the

Dispersion Alignment system, delivering a frequency range of 59 Hz – 20 kHz.

SITC Wireless Head MicrophoneWireless Headset System combines professional-quality

sound with simple setup and up to 14 hours battery life for great audio performance

21 right out of the box. The system includes BLX4 tabletop single-channel receiver, PGA31 Nos 4 63,007.00 2,52,028.00

headset microphone with BLX1 bodypack transmitter, clothing clip, power supply, 2 AA

batteries, windscreens

22 SITC , USB Extension Cable ,USB HUB & Speaker Cable Nos 1 1,09,767.00 1,09,767.00

23 SITC ,12" AV Equipment rack with required accessories Nos 1 27,330.00 27,330.00

24 SITC , Zopai Meeting Room Scheduler Nos 1 1,04,288.00 1,04,288.00

25 SITC , 8 port Poe Switch Nos 3 10,884.00 32,652.00

26 SITC , Ipad air 5Th Gen Nos 1 55,805.00 55,805.00

Total in INR 67,40,177.00

Digitally signed by SAKET

PLUMBING WORKS AND ACCESSORIES

Sno Item Description Quantity Unit DSR RATE MR RATE Total DSR Total Non DSR

1 CP/SANITARY WARE

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) - -

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c fixing

the pipe with clamps at 1.00m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good

the same including testiang of joints complete as per

direction of Engineer in Charge.

Concealed work including cutting chases and making good

18.8.2 20mm dia nominal outer dia pipes 25 Rm. 537.6 13,440.00

18.8.3 25mm dia nominal outer dia pipes 25 Rm. 627.25 15,681.25

1.2 Providing, fixing, jointing and testing in position the following uPVC 10 Rmt 96.00 960.00

pipes conforming to IS 4985 of 6 kg/sqcm pressure rating including

all fittings, solvent weld joints, testing complete for drainage system

cut to required length to be laid under floor and making good the

same complete as required.

For waste pipes

40mm OD (6 kg pressure)

1.3 Providing and fixing uPVC pipes type -B conforming to IS: 13592 10 Rmt 626.00 6,260.00

for soil, waste and vent pipes including all fittings rubber ring type

(plain or with access door) e.g. bends, junctions, cowls, offsets,

access pieces, jointing with rubber ring joints with lubricant etc.

fixed with clamps to walls.

For soil, waste and vent pipes

1.4 Supply, fixing , testing and commisioning of CP/Sanitary fittings of Kohler

a Providing and fixing of WC in ceo toilet 1 Nos 29,790.00 29,790.00

b Providing and fixing of conceled tank 1 Nos 15,167.00 15,167.00

c Providing and fixing of push plate 1 Nos 3,370.00 3,370.00

d Providing and fixing of wash basin 1 Nos 26,600.00 26,600.00

e Providing and fixing of health faucet 1 Nos 4,225.00 4,225.00

f Providing and fixing of basin mixer 1 Nos 17,896.00 17,896.00

g Providing and fixing of angle valves 3 Nos 2,507.00 7,521.00

Digitally signed by SAKET

Sno Item Description Quantity Unit DSR RATE MR RATE Total DSR Total Non DSR

h Providing and fixing of mirror of size 750mmx1200mm 8 Nos 14,896.00 1,19,168.00

2 Bathroom Accessories

Model No. :DTPR0015

Material: 304 Stainless Steel

1 TOILET PAPER HOLDERS Opera on : Manual 12.00 NOS 3,190.00 38,280.00

Installa on Method : Wall Mounted

Applica on : Wc Cubicle Area

Feature : With Mobile Stand

Model No.DHGB0011

Swing :Wall Mount

Material: 304 Stainless Steel With Sa n Finish

2 HANDICAP GRAB BAR Operation : Moveable (Horizontlly & Vertically) 1.00 NOS 8,414.00 8,414.00

Capacity: 200 Kg

DSDR0112 - SB : SANITIZER,SAOP,SOFT GEL

DSDR0113 - SB : IPA SPRAY

CAPACITY : 1100ML

5 SOAP/SANITIZER 1.00 NOS 8,366.00 8,366.00

MATERIAL : 304 SS

OPERATION : BATTERY/ELECTRIC

BATTERY : 4 X AA SIZE DURACELL ( NOT INCLUDED )

SOAP AND SANITIZER

MATERIAL : STAINLESS STEEL

AUTOMATIC SENSOR

7 BATTERY : 3 X D SIZE DURACELL ( NOT INCLUDED ) 1.00 NOS 13,081.00 13,081.00

COMPARTMENT : 2

SIZE : 42CM X 29.3CM X 67.3CM

MATERIAL : STAINLESS STEEL

8 CABIN TRASH BINS 25.00 NOS 2,227.00 55,675.00

SIZE : 166 X 340 X 301MM

Digitally signed by SAKET

Sno Item Description Quantity Unit DSR RATE MR RATE Total DSR Total Non DSR

MATERIAL : STAINLESS STEEL

WORKSTATION TRASH COLOUR:BLACK

BINS CAPACITY : 10L

SIZE : 225 X 165 X 275MM

MATERIAL : PVC VINYL

DCMT0001 - G : HIGH TRAFFIC

10 LOOP ENTRANCE MAT MAT SIZE-4350X1400 MM 6.00 Sqft 475.00 2,850.00

MATERIAL : PVC VINYL

11 LOOP ENTRANCE MAT DCMT0002 - G : MEDIUM TRAFFIC 15.00 Sqft 355.00 5,325.00

MAT SIZE-1850X1350 MM

MATERIAL : PVC VINYL

DCMT0003 - G : LOW TRAFFIC

12 LOOP ENTRANCE MAT 15.00 Sqft 211.00 3,165.00

MAT SIZE-2050X900 MM

MATERIAL : ALUMINIUM PROFILE WITH CARPET

COLOR : SILVER & BROWN

AREA : HIGH TRAFFIC

ALUMINIUM DUST PROFILE HEIGHT : 14.5 MM +/- 0.25

BUSTER MAT TOTAL HEIGHT : 19.5 MM +/- 0.25

RECESS REQUIRED : 15 MM +/- 0.25

MAT SIZE-2400X600 MM

Digitally signed by SAKET

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE rate MR RATE DSR AMOUNT

2022)/ MR AMOUNT

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator

made of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass

1.0 wool covered with tissue paper ,elliptical volume control damper , calibrated differential pressure

sensor (DPT sensors) at inlet complete with digital Thermostat.(All VAV shall be factory calibrated).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

MR 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 35 HP or as directed by the engineer in charge Nos. 1 167442.00 1,67,442.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted

3.0 MR price shall be inclusive of necessary conduting, copper control cabling from the sensors to the Nos. 1 16279.00 16,279.00

respective VFDs as per "Approved Shop Drawings".

Supply, Installation, Testing & Commissioning of Silent type circular /rectangular inline fans for

exhaust air complete with sheet metal casing, 25mm thick acoustic insulation, direct driven

centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for

operation on 220+6 % volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both sides

to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of

4.0 following characteristics:

All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be

complete with Plug Top & necessary power cable.

Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for indoor

a 200 CFM S P of 13-14 for Toilet Nos. 5 6000.00 30,000.00

5.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following

capacity with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections,

MR blades, the impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10

%, complete as required. This cost shall include the cost for suitable panel, DOL starter, breakers

etc compete in all respect as per the directions of engineer in charge.

a 7000 cfm at 15 mm static presuure for exhaust air With Class "F" insulation. NOS 2 122094.00 2,44,188.00

b 7000 cfm at 15 mm static presuure for exhaust air With Class "H" insulation. NOS 2 133870.00 2,67,740.00

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and

return air path as and where required of required sizes i/c control wiring,the damper shall be

motorized and spring return so as to close the damper in the event of power failure automatically

6.0 16.20 and open the same in case of power being restored. The spring return action shall be inbuilt

mechanism and not externally mounted. The damper shall also be closed in the event of fire signal

complete as required and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

Digitally signed by SAKET

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE rate MR RATE DSR AMOUNT

2022)/ MR AMOUNT

GI Gravity Louver

7.0 MR Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene

rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

8.0 VOLUME CONTROL DAMPER

MR Supply, Installation and Testing of GI box type volume control dampers as per the specifications and

a shop drawings. SQM 5 5488.00 27,440.00

- For Rectangular Ducts

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/

round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

supports etc. as per approved drawings and specifications of following sheet thickness complete as

10 Supply and installation of pre insulated Plennums

i Supply Air Plennums in mm 900(L) x 150(D) x 300(H) Nos 40 2888.00 1,15,520.00

ii Supply Air Plennums in mm 900(L) x 200(D) x 300(H) Nos 20 3103.00 62,060.00

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

volume control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without

volume control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

14.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 8 3397.00 27,176.00

retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop

drawings and specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece

extrusion so there are no visible joints. Slot diffusers shall be complete with end caps either as end

plates or end angles or integral part, air control blades etc. Slot diffuser have a variable neck length

15.0 MR and the diffuser face could be optionally be fitted to the plenum box on site. Diffuser shall have

provision to access collar dampers for air balancing.

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 6 14957.00 89,742.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of

16.0 MR fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird SQM 2 5057.00 10,114.00

screen to be got approved from consultants and Clients prior to procurement.

Digitally signed by SAKET

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE rate MR RATE DSR AMOUNT

2022)/ MR AMOUNT

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell

Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile

17.0 rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape

insulation complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded

glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm

18.0 16.21 centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum SQM 30 708.00 752.82 22,584.60

sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound

etc. complete as required and as per specifications

Supply, Installation, Testing and Commissioning of Air Purification systems in the specified areas

where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air

quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters. The Needlepoint

brushes shall be designed to properly release equal amount of positive and negative ions in the

supply air,>400Million ions/cc without any obstruction. The units to be suitable for capacities up to

19.0 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry

MR contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7

and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and

pathogens and backed with Independent lab test reports on the real virus and not surrogate. The

system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The

products should be UL 2998 listed with zero Ozone Emission.

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5,

PM10, CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device,

you can customize it to measure more parameters by adding extra sensors. This monitor should be

a 3-tier architecture including sensor Hardware, secure cloud infrastructure, monitoring apps

including dashboard, android/IOS apps, where ever requires. Dashboard should be customisable

and IOT (Internet of things) enabled with view and management for all of your locations on one

dashboard so that you can easily identify and address any air quality issues. Sensors should be soft

calibratable. The System should be capable of providing periodic Preventive maintenance for

automated after sales support service in form of notification/ alerts and user interaction through

dashboard application.

Air Quality Monitor Nos 1 7051.00 7,051.00

Supply, installation testing and commissioning of Router / Supervisory Controller which will manage

the VAV information and communicates on BACnet®/ LONWORKS® protocol to monitor and

Control the VAVs from BMS software on PC in accordance with the approved shop drawings and

technical specifications. Connecting the final daisy loop from all VAV to Supervisory Controller shall

21.0 MR be part of the scope. The communication between Supervisory controller and BMS software in PC Nos 1 203654.00 2,03,654.00

should be on IP. Cost include powder coated Panel for Supervisory Controller of required size with

24 Volts provision which includes power cable, plug, transformer and with all necessary accessories

for mounting on wall in accordance with the approved shop drawings and technical specifications.

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with

proper ferrules, lugs and other necessary accessories. The spec shall meet the system

manufacturer specifications.

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV & Split AC Communication Cable

with proper ferrules, lugs and other necessary accessories. The spec shall meet the system

manufacturer specifications.

Digitally signed by SAKET

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE rate MR RATE DSR AMOUNT

2022)/ MR AMOUNT

Supply & Laying of ISI Certified 1" dia PVC Conduit with bends, collar, saddles, saddle base and

other accessories for Signal Cable / DDC Communication Cable

Supply and Installation of Split Air-conditioner of 1.8 Tr Capacity with High wall type indoor unit and

condensing outdoor unit

26.0 MR Supply & Installation of Auto Switch on/off Timer controller for 1 Wrkg and 1 Std by Split AC Nos. 2 11391.00 22,782.00

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with

27 suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-

O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified

thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

27.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1 mm with 19 mm thick insulation Rmtr 30 245.00 260.51 7,815.30

27.2 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1 mm with 19 mm thick insulation Rmtr 30 588.00 625.22 18,756.60

28 MR Stand for Outdoor Condensing Unit Nos. 4 1013.00 4,052.00

Supply,installation,testing and commissioning of PVC drain water with necessary clamps, fittings such as

29 MR bends tees etc. and duly insulated.

20 mm dia (9 mm tick ins.) Rm 30 216.00 6,480.00

TOTAL HVAC WORKS 11,92,653.84 24,88,108.00

Digitally signed by SAKET

S. No. Description Unit Qty DSR Elec 2022 Rate/ DSR Enhanced rate GST@18%

Rate/NON DSR TOTAL (DSR) TOTAL (NON DSR)

1 CLEAN AGENT SYSTEM

Make : CRYPTOZ/SIEMENS/TYCO

a SITC of 80 ltrs capacity (or capacity as required & available) CCOE approved Nos. 2.00 MR

seamless Cylinder with with Valve Assembly and container straps

c SITC of Master for Single Cylinder comprising of below items : Nos. 2.00 MR 97,450.43 - 1,94,900.87

Pr. Guage + Low Pr. Supervisory Switch

Electromagnetic Actuator

Pneumatic Actuator

Flexible Discharge Hose

Flexible Actuation Hose

* Manual & Pneumatic Actuator

* Union 7/16 JIC 1/8

d Gas Discharge Nozzles Nos. 5.00 MR 5,521.00 - 27,605.00

e SITC of M.S. Seamless ASTM A 106 Gr. B. Sch. 40 Piping for Fire suppression per 2.00 MR

Rooms cylinder

f SITC of UL Listed Gas Release panel Nos. 2.00 MR 18,736.00 - 37,472.00

g SITC of UL Listed Conventional Multi Sensor Detector Nos. 10.00 MR 1,497.00 - 14,970.00

h SITC of Manual Abort Station Nos. 2.00 MR 2,550.00 - 5,100.00

i SITC of Manual Gas Release Station Nos. 2.00 MR 2,550.00 - 5,100.00

j SITC of Conventional Sounder cum strobe having 2 different tone settings with Nos. 2.00 MR

range of 90dbA and 95dbA and field selectable 15/30/75/110 candelas.

k SITC of Conventional Sounder Nos. 2.00 MR 2,439.00 - 4,878.00

l SITC of Discharge Sign Board Nos. 2.00 MR 2,095.00 - 4,190.00

m SITC of 2 core 1.5 Sq. mm CU PVC sheathed Fire survival armoured cable Mtrs. 200.00 MR 220.00 - 44,000.00

Sub-Total of Sub-Section : CLEAN AGENT SYSTEM - 12,39,478.87

2 FIRE HYDRANT SYSTEM DSR-Ele.2022

1 Supply, installation , testing & commissioning of M.S. pipe I.S. 1239 (Heavy class)

complete with all fittings like, unions, couplings, bends, elbows, tees, offsets,

reducers, flanges as per table 'E' etc. to complete the work as per the requirement

at site including painting with two coats of synthetic enamel paint. Pipe welded

joint. The cost shall include the MS/GI structural supports as per approved drawings

and specifications per running meter .

2 Supply , installation , testing & commissioning of Pendent Sprinkler Head 68*

Standred response (Tyco/HD/ Newage) 134 18.21.1 522 555.04 74,375.36 -

Digitally signed by SAKET

S. No. Description Unit Qty DSR Elec 2022 Rate/ DSR Enhanced rate GST@18%

Rate/NON DSR TOTAL (DSR) TOTAL (NON DSR)

3 Supply , installation , testing & commissioning of SS Flexible Pipe 1200 mm long 25

4 Supply , installation , testing & commissioning of Rosette Plate 25 mm dia 134 18.29 225 239.24 32,058.16 -

5 Supply , installation , testing & commissioning of cast iron Butterfly valves

conforming to PN1.6 I.S.13095 with Nut- bolts complete including companion

flange as complete in all respect

6 Supply , installation , testing & commissioning of Fire Extinguishers Tyco

a ABC Powder Type Fire Extinguisher 2 Kg. ISI Mark ( MAP-90) 6 MR 2,882.00 17,292.00

b ABC Powder Type Fire Extinguisher 4 Kg. ISI Mark ( MAP-90) 4 MR 4,656.00 18,624.00

c CO2 Fire Extinguisher 4.5 Kg. ISI Mark 2 MR 7,982.00 15,964.00

d Clean Agent Fire Extinguisher 2 Kg. ISI Mark for Server Room 4 MR 9,424.00 37,696.00

e Clean Agent Fire Extinguisher 5 Kg. ISI Mark Server Room RO MR 18,293.00

3 FIRE ALARM SYSTEM : MAKE TYCO/ASES/SIEMENS

FIRE ALARM SYSTEM : MAKE TYCO/ASES/SIEMENS

1 Supplying, installation, testing and commissioning of 2 loop micro processor based

addressable main fire alarm panel, central processing unit with the following loop

modules and capable of supporting not less than 240 devices (including detectors)

and minimum 120 detectors per loop and loop length minimum 1.5 km, network

communication card, minimum 160 character graphics/ LCD display with touch

screen or other keypad and minimum 2000 events history log in the non volatile No. 1 17.2.1.2 239225.00 254367.94 2,54,367.94

memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24

volt sealed maintenance free batteries with automatic charger. The panel shall have

facility to connect printer to printout log and facility to have seamless integration

with analog/digital voice evacuation system and shall be complete with all

2 Supply, installation, testing & commissioning of Addressable Photothermal detector

complete as required.

3 Supply, installation, testing and commissioning of Dual LED Response indicator for

indicating the activation of the Remotely located Detector.

4 Supply, installation, testing & commissioning of Addressable Heat detector

Complete as required.

5 Supply, installation, testing and commissioning of Addressable Manual Call Point

complete as required.

6 Supply, installation, testing and commissioning of SOUNDER WITH STROBE

complete as required

7 Supply, installation, testing and commissioning of Addressable Control module. Nos. 4 17.2.10 3003.00 3193.09 12,772.36

Digitally signed by SAKET

S. No. Description Unit Qty DSR Elec 2022 Rate/ DSR Enhanced rate GST@18%

Rate/NON DSR TOTAL (DSR) TOTAL (NON DSR)

8 Supply, installation, testing and commissioning of Addressable Monitor module.

9 Supply, installation, testing and commissioning of Aapiration detector for Server

Supply & laying of armoured FRLS 2 X 1.5 sqmm Cu cable. RM 700 17.5.2 173.00 183.95 1,28,765.00

11 PIPING CPVC for aspiration system RM 50 17.4.1 56.00 59.54 2,977.00

TOTAL CARRIED OVER TO SUMMARY 3,548.00 9,14,653.95 10,644.00

4) PUBLIC ADDRESS SYSTEM

XI. PUBLIC ADDRESS SYSTEM

BOSCH/HEINRICH/AHUJA Make

1) Supply, installation, testing & commissioning of Bosch Plena Voice Alarm Call Station Nos 1 17.3.1 1,26,411.00 1,34,412.82 -

having gooseneck condenser microphone with zone Selection Keys and an All-Call-

Key, PTT Switch, selectable gain, speech filter and limiter for improved intelligibility, 134412.82

LED indication for zone selection, fault and emergency state (Bosch Cat. No. LBB

1946 or equivalent)

2) Supply, installation, testing & commissioning of Bosch Plena System Preamplifier Set 1 17.3.9 81,756.00 86,931.15 -

having features like announcement to 6 zones (Bosch Cat. No. LBB 1925 or 86931.15

a Supply, installation, testing & commissioning of Bosch Plena Booster Amplifier Nos 1 MR 47,894.00 - 47,894.00

capable of delivering 480W Wattage RMS power output for speakers mentioned in

item no. 5a, built-in fan for temperature control, built in line matching transformer

distortion typically <3% @1 KHz, S/N> 80 dB complete as required. LBD 1935

b Supply, installation, testing & commissioning of Bosch Plena Mixing Amplifier Nos 1 MR 29,712.00 - 29,712.00

capable of delivering 60W Wattage RMS power output , built-in fan for temperature

control, built in line matching transformer distortion typically <3% @1 KHz, S/N> 80

dB complete as required.PLN-1ME60-3in PLENA MIXING AMPLIFIER with USB

connectivity and BLUETOOTH

4) Supply, installation, testing & commissioning of 19" equipment rack made out of Nos 1 MR 21,951.00 - 21,951.00

CRCA sheet to house all the control equipment.

5) Supply, installation, testing and commissioning of complete loud speaker ceiling Nos 50 17.3.2 965.00 51,304.00 -

mounted type Bosch LBD 0606.

6) Wiring with 2 core 40/.2 mm PVC insulated twisted copper conductor wires in RM 800 17.5.3.1 54.00 45,936.00 -

existing conduit/ trunking as required.

7) Supply and laying in position the following sizes of medium FR PVC conduits

including providing all accessories complete as required.

a) 25 mm dia FRPVC conduit RM 700 NOT IN DSR 72.00 - 50,400.00

Digitally signed by SAKET

S. No. Description Unit Qty DSR Elec 2022 Rate/ DSR Enhanced rate GST@18%

Rate/NON DSR TOTAL (DSR) TOTAL (NON DSR)

b) 25 mm dia MS flexible pipe RM 54 17.5.4 53.00 56.35 3,042.90 -

Total carried over to Summary 3,21,626.87 1,49,957.00

TOTAL TO SUMMARY 23,07,266.50 14,89,655.87

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

1 FLOORING WORKS

Supply fixing and mirror polishing of italian marble flooring wherever necessary . Marble flooring shall be 322.22 Sq mts 9621.00 31,00,100.00

set with thick wet mortar bedding on sand bedding with a thickness of 25-30 mm.

Supply fixing and mirror polishing of italian marble skirting wherever necessary. Marble skirting shall be set 18.13 Sq mts 9621.00 1,74,380.63

with adhesives of minimum thickness to flush with wall or partition level.

Supply fixing and mirror polishing of italian marble wall cladding in reception backdrop and 40 member 28.70 Sq mts 9621.00 2,76,158.33

1.3 conference backdrop. Marble wall cladding shall be set with adhesives of minimum thickness .

Supply and fixing unfilled leather finish beige travertine marble wall cladding in reception backdrop and 40 53.00 Sq mts 9621.00 5,09,913.00

1.4 member conference backdrop. Marble wall cladding shall be set with adhesives of minimum thickness .

Supply fixing and mirror polishing of italian marble wall cladding in 10 member conference room. Marble 9.26 Sq mts 9621.00 89,083.33

wall cladding shall be set with adhesives of minimum thickness .

Supply fixing and mirror polishing of italian marble wall cladding in CEO cabin behind CEO table and in CEO 4.20 Sq mts 9621.00 40,408.20

dining area. Marble wall cladding shall be set with adhesives of minimum thickness .

Supply fixing and mirror polishing of italian marble flooring and wall cladding in CEO toilet . Marble to be set 40.74 Sq mts 8338.00 3,39,696.30

with necessary sand and cement mortar to achieve plumb and 90 degrees on all surfaces.

Supply and fixing of tiles of size 600mmx1200mm matt/lapatro finish tile on the floor wherever necessary 55.56 Sq mts 1859.00 1,03,277.78

1.8 with 2mm spacer. Tiles flooring shall be set with adhesive of thickness required to achieve zero level or

necessary slopes wherever necessary.

Supply and fixing of tiles of size 600mmx1200mm matt/lapatro finish tile on the floor wherever necessary 11.71 Sq mts 1859.00 21,768.89

1.9 with 2mm spacer. Tiles flooring shall be set with adhesive of thickness required to achieve zero level or

necessary slopes wherever necessary.

Supply and fixing of tiles of size 600mmx1200mm matt/lapatro finish tile on the floor wherever necessary 1.31 Sq mts 1859.00 2,435.29

1.10 with 2mm spacer. Tiles flooring shall be set with adhesive of thickness required to achieve zero level or

necessary slopes wherever necessary.

Supply and fixing of tiles of size 600mmx1200mm matt/lapatro finish tile on the walls wherever necessary 157.40 Sq mts 1859.00 2,92,606.60

1.11 with 2mm spacer. Tiles cladding shall be set with adhesive of thickness required to achieve plumb and 90

degrees wherever necessary.

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

1.12 Supply and fixing of 500mmx500mm carpet tiles wherever necessary. 331.48 Sq mts 1925.00 6,38,099.00

1.13 Supply and fixing of natural oak engineered wooden flooring from Kaara decors. 66.66 Sq mts 7056.00 4,70,352.96

Supply and fixing of 12mmx12mm black anodised aluminium T profiles wherever necessary using necessary 97.22 R mts 3337.00 3,24,423.14

adhesives and hardwares.

Supply and fixing of durafit interlocking rubber tiles of 10-16mm thickness from EBACO. Fixing to be done 20.37 Sq mts 1539.00 31,349.43

with necessary adhesives.

Supply and fixing of tiles of size 300mmx300mm on the floor wherever necessary . Tiles flooring shall be set 374.23 Sq mts 1475.00 5,51,989.25

1.16 with adhesive of thickness required to achieve zero level or necessary slopes wherever necessary. BP of tile

Providing of laticrete of weber epoxy grouting of approved color in tile joints wherever necessary. Epoxy 608.75 Sq mts 333.00 2,02,713.75

grouting to be filled to entire thickness of tile but 1mm less than the finished tile surface.

Supply and fixing of Floor guard honeycomb tile and floor protector from Nilkamal. Rate to include all 648.14 Sq mts 141.00 91,387.74

materials required inclusive of tapes adhesives etc.

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its 32.40 Sq mts 7124.00 2,30,817.60

components of approved make for different plenum height with possible height adjustment upto 50mm,

comprising of modular loadbearing floor panels supported on G.I. rectangular stinger frame workand G.I.

Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-

charge consisting of:(a) Providing at required spacing to form modular framework, pedestals made out of GI

tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size

100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5

mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud

for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level.

1.19 The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of

approved make or the machine screw with rawl plug.(b) Stringers system in all steel construction hot dipped

galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers

on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the

grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide

adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted

clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the

architectural drawings, as specified and as directed by the Engineer-in-charge.

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

Supply and fixing of steel grey granite of 18mm thickness on the pantry area and toilet vanity counter top 8.33 Sq mts 1604.00 13,361.32

1.20 wherever necessary . Rate to include all chamfer, edge polish , cross cutting and mitre joint cutting.

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special 175.92 Sq mts 1616.00 2,84,286.72

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia

x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high havin flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wallipartition with the hel of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing

to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing

. finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting wit

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part ) :2011 (Board

with BIS certification marks)

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

Providing and fixing false ceiling cove at all height including providing and fixing of frame work made of 97.22 Rmts 1616.00 1,57,107.52

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges

of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high havin flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wallipartition with the hel of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing

to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing

. finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting wit

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part ) :2011 (Board

with BIS certification marks)

Supply and fixing of translucent stretched ceiling of multiple sizes and shapes made out of material that is 30.09 Sq mts 0.00 -

2.3 waterproof and fire retardant. Stretched ceiling to be installed with necessary clip on aluminium framework

as per the design specified.

Supply and fixing of triangulated open grid ceiling in reception area of size 4200mmx3900mmx300mm with 35.00 Sq mts 4469.00 1,56,415.00

all necessary material, hardware and labour.

Supply and fixing of wooden ceiling of size 6800mmx2400mmx300mm in 40 member made out of 8mm 34.02 Sq mts 17966.00 6,11,203.32

2.5 flexi plywood finished with veneer on all visible sides and melamine polish. Rate to include all necessary

aluminium supports of 50mmx50mm at regular intervals and all other hardwares.

Supply and fixing of wooden ceiling of size 3900mmx1800mmx300mm in 10 member conference room 14.58 Sq mts 17966.00 2,61,944.28

made out of 8mm flexi plywood finished with veneer on all visible sides and melamine polish. Rate to

include all necessary aluminium supports of 50mmx50mm at regular intervals and all other hardwares.

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

Supply and fixing of wooden ceiling of size 3000mmx1500mmx300mm in 6 member conference room made 9.72 Sq mts 17966.00 1,74,629.52

out of 8mm flexi plywood finished with veneer on all visible sides and melamine polish. Rate to include all

necessary aluminium supports of 50mmx50mm at regular intervals and all other hardwares.

Supply and fixing of wooden ceiling of 300mm from true ceiling depth in CEO cabin made out of 18mm 13.05 Sq mts 11543.00 1,50,636.15

plywood finished with veneer on all visible sides and melamine polish. Rate to include all necessary

aluminium supports of 50mmx50mm at regular intervals and all other hardwares. Base price of veneer

Supply and fixing of wooden ceiling cove of depth 300mm in CEO cabin dining area made out of 18mm 2.91 Sq mts 11543.00 33,590.13

plywood finished with veneer on all visible sides and melamine polish. Rate to include all necessary

aluminium supports of 50mmx50mm at regular intervals and all other hardwares. Base price of veneer

3 Carpentry works

Supply and fixing of ply packing of size 900mmx900mmx150mm above false ceiling made out f 18mm 7.00 Nos 4490.00 31,430.00

3.1 plywood and 50mmx50mm aluminium framework. Frame work to be made in order to hold hanging light

fitting of weight upto 5-10kgs. Rate to include all necessary hardwares

Supply and fixing of partition above false ceiling made out of 50mmx50mm aluminium frame work made at 70.06 Sqmts 5131.00 3,59,477.86

3.2 intervals of 600mm center to center in both horizontal and vertical directions. Frame work to be clad with

12mm MDF. Rate to include all necessary hardwares

Supply and fixing of partition made out of 50mmx50mm aluminium frame work made at intervals of 191.52 Sqmts 8338.00 15,96,893.76

600mm center to center in both horizontal and vertical directions. Frame work to be clad with 12mm MDF

finished with approved 4mm veneer and melamine polish. Veneer to be clad with necessary 4mm grooves

at joints finished with black polish. Rate to include all necessary hardwares.

Supply and fixing of ply partition in reception made out of 50mmx50mm aluminium frame work made at 14.39 Sqmts 5131.00 73,835.09

3.4 intervals of 600mm center to center in both horizontal and vertical directions. Frame work to be clad with

12mm plywood on all sides.Rate to include all necessary hardwares

Supply and fixing of 80mmx25mm black powder coated aluminium partition with infill of 11mm thick 157.40 Sqmts 10267.00 16,16,025.80

3.5 laminated glass wherever necessary comprising of 1.5mm pvb sheet sandwiched between 6mm and 4mm

toughened glass. Rate to include all necessary hardwares

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

Supply and fixing of half partition in assistant manager cabin made out of 50mmx50mm aluminium frame 5.83 Sqmts 8338.00 48,610.54

work made at intervals of 600mm center to center in both horizontal and vertical directions. Frame work to

3.6 be clad with 12mm MDF finished with approved 4mm veneer and melamine polish. Veneer to be clad with

necessary 4mm grooves at joints finished with black polish. Rate to include all necessary hardwares.

Supply and fixing of wall panelling made out of 12mm mdf cladded with approved veneer finished with 113.88 Sqmts 8338.00 9,49,531.44

melamine polish. Panelling to have base framework made out of 12mmx25mm aluminium at intervals of

600mm center to center in both vertical and horizontal directions. Rate to include all necessary hardwares.

Supply and fixing of full height storage boxes made out of 18mm plywood finished with approved .8mm 39.35 Sqmts 20499.00 8,06,635.65

3.8 laminate on the inside and veneer on the outside. Veneer to be finished with melamine polish. Rate to

include all hardwares including shelf pins, tower bolts, hinges, lock, handles etc.

Supply and fixing of half height storage boxes made out of 18mm plywood finished with approved .8mm 4.16 Sqmts 20499.00 85,275.84

3.9 laminate on the inside and veneer on the outside. Veneer to be finished with melamine polish. Rate to

include all hardwares including shelf pins, tower bolts, hinges, lock , handles etc

Supply and fixing of partition made out of 50mmx50mm aluminium frame work made at intervals of 5.55 Sqmts 7055.00 39,155.25

600mm center to center in both horizontal and vertical directions. Frame work to be clad with 12mm MDF

3.10 finished with approved 4mm MDF and 2 coats putty, 1 coat primer and 2 coats of emulsion paint of

approved color. 4mm MDF to be clad with necessary 4mm grooves at joints finished with paint. Rate to

include all necessary hardwares

Supply and fixing of pantry under counter storage boxes made out of 18mm plywood finished with 2.77 Sqmts 20499.00 56,782.23

3.11 approved 0.8mm laminate on the inside and 1mm laminate on the outside. Rate to include all hardwares

including shelf pins, tower bolts, hinges, lock, drawer channels, handles etc.

Supply and fixing of pantry overhead storage boxes made out of 18mm plywood finished with approved 2.77 Sqmts 17341.00 48,034.57

3.12 0.8mm laminate on the inside and 1mm laminate on the outside. Rate to include all hardwares including

shelf pins, tower bolts, hinges, locks, handles etc.

Supply and fixing of 50mm thick concealed doors wherever necessary. Doors to be made out 36mm thick 5.00 Nos 38734.00 1,93,670.00

flush door clad with 8mm plywood finished with approved veneer on both sides. Door thickness to be

finished in solid wood beading polished to match veneer. BP of veneer @ Rs 180 per sft(size-900widthx2400

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

Supply and fixing of 40mm thick doors wherever necessary. Doors to be made out 36mm thick flush door 5.00 Nos 32775.00 1,63,875.00

clad with approved veneer on one side and approved laminate on the other side.. Door thickness to be

3.14 finished in solid wood beading polished to match veneer. BP of veneer @ Rs 180 per sft. Rate to include all

necessary hardware like handles , locks , tower bolts etc(size-900widthx2400 height)

Supply and fixing of 40mm thick doors wherever necessary. Doors to be made out 36mm thick flush door 2.00 Nos 38734.00 77,468.00

clad with approved veneer on one side and approved laminate on the other side.. Door thickness to be

3.15 finished in solid wood beading polished to match veneer. BP of veneer @ Rs 180 per sft. Rate to include all

necessary hardware like handles , locks , tower bolts etc(size-750widthx2400 height)

Supply and fixing of 2 track 4 panel 50mm thick doors of size 1200mmx2700mm in the 40M conference 4.00 Nos 57802.00 2,31,208.00

room. Doors to be made out 25mmx25mm aluminium sub frame clad with 8mm plywood on all sides

3.16 finished with veneer and mealmine polish on one side and laminate on the other side. Track to be made out

extruded aluminium section from hafele or CNR with soft close mechanism.Rate to include all necessary

hardware including tracks, floor guides etc.

Supply and fixing of black powder coated aluminium and 11mm thick laminated glass door of size 900width 16.00 Nos 32775.00 5,24,400.00

3.17 x 2400 height wherever necessary. Rate to include all hardwares including handles, hinges, locks and door

Supply and fixing of wall panelling made out of 12mm mdf cladded with 6mm ultraclear mirror from saint 15.92 Sqmts 7697.00 1,22,536.24

gobain. Panelling to have base framework made out of 12mmx25mm aluminium at intervals of 600mm

center to center in both vertical and horizontal directions. Rate to include all necessary hardwares and

adhesives to stick the mirror.

Supply and fixing of 200mm deep pelmets along exterior walls made out base aluminium frame work of size 38.88 Sqmts 6418.00 2,49,531.84

25mmx25mm cladded with 12mm plywood on the front and 18mm at the bottom finished with 4mm MDF

and finished with 2 coats of putty, 1 coat of primer and 2 coats of emulsion paint in approved color.

Supply and fixing of ceo vanity box for the toilet area of size 1825mmx525mm and height of 450mm height 1.15 Sqmts 20499.00 23,573.85

3.20 made out of BWR plywood finished with laminate both inside and outside as per design.inclusive of

material and labour.

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

4 PAINTING WORKS

4.1 Providing of 2 coats of putty, 1 coat primer and 2 coats of emulsion paint wherever necessary. 1766.20 Sqmts 321.00 5,66,950.20

Providing of plaster of paris punning wherever necssary with and average thickness of 8-12mm to achieve 925.92 Sqmts 453.00 4,19,441.76

plumb and 90 degrees and alignment

5HANGING WOODEN CEILING

Providing and fixing of triangulated open grid ceiling in workstation area of size 9150mmx6000mmx80mm 134.26 Sqmts 4469.00 6,00,007.94

5.1 and 8700mmx7500mmx80mm with all necessary material, hardware and labour.

Grand Total 1,82,18,486.04

Grand Total 1,82,18,486.04

Grand total to summary 1,82,18,486.04

Grand total to summary 1,82,18,486.04

Digitally signed by SAKET

LOOSE FURNITURE

Sno Item Description Quantity Unit Rate/unit Total

1 WORKSTATIONS

1.1 Supply and fixing of customised workstations for employees and consultants

Providing and fixing of half height storage of size 1500mmx1200mmx400mm made out 18mm plywood finished with approved .8mm laminate on the inside 48 Nos 41117.00 1973616.00

and 1mm laminate on the outside. Rate to include all necessar hardware including hinges, locks, handles etc.

Providing of workstation tops of size 1200mmx600mm made out of 18mm plywood finished with approved laminate on all sides with matching edge banding 72 Nos 6168.00 444096.00

on the thicknesses.

Supply and fixing of 1200mmx725mm vertical metal supports made out of 25mmx50mm MS box section powder coated in black color. Rate to include all 6 Nos 20559.00 123354.00

necessary hardware to fix top to metal base inclusive of level adjusters.

Supply and fixing of 2400mmx1000mm horizontal metal supports made out of 25mmx50mm MS box section powder coated in black color. Rate to include all 3 Nos 27411.00 82233.00

necessary hardware to fix top to metal base.

Supply and fixing of 2400mmx500mm horizontal metal supports made out of 25mmx50mm MS box section powder coated in black color. Rate to include all 5 Nos 20559.00 102795.00

necessary hardware to fix top to metal base.

Supply and fixing of 1200mmx1000mm horizontal metal supports made out of 25mmx50mm MS box section powder coated in black color. Rate to include all 2 Nos 17132.00 34264.00

necessary hardware to fix top to metal base.

Supply and fixing of 600mmx725mm vertical metal supports made out of 25mmx50mm MS box section powder coated in black color. Rate to include all 7 Nos 13706.00 95942.00

necessary hardware to fix top to metal base inclusive of level adjusters.

2.1 Supply and fixing of CEO table of size 5100mmx1050mm

Providing of table top of size 5100mmx1050mmx50mm made out of 18mm plywood finished with laminate on one side and approved italian marble on the 1 Nos 75381.00 75381.00

top and thickness

Providing and fixing of side return unit of size 750mmx600mmx650mm made out of 18mm plywood finished with laminate on the inside and approved 1 Nos 27411.00 27411.00

veneer on the outside.Rate to include all hardwares including 2 sets drawer channels, locks etc BP of veneer @180 per sft

Providing of circular base of dia 450mm and 650mm height made out of plywood frame work and clad with flexi ply finished with approved vneeer and 1 Nos 25356.00 25356.00

melamine polish. BP of veneer @180 per sft

Providing of 4800mmx600mmx50mm modesty panel made out 18mm plywood finished with veneer on one side and fluted wood en panel on the outside 1 Nos 51396.00 51396.00

and melamine polish. BP of veneer 180 per sft

e Providing and fixing of 5050mmx1000mmx36mm frame work made out of 36mm MS box section support for table top finished in black paint. 1 Nos 20559.00 20559.00

3 CEO DINING TABLE

3.1 Supply and fixing of dining table of size 2100mmx1050mmx50mm

Providing of table top of size 2100mmx1050mmx50mm made out of 18mm plywood finished with laminate on one side and approved italian marble on the 1 Nos 44544.00 44544.00

top and thickness

Providing and fixing of circular base of 450mm dia and 700mm height made out of 18mm plywood frame work clad with flexi ply finished with approved 2 Nos 23985.00 47970.00

veneer and melamine polish. BP of veneer 180 per sft

Digitally signed by SAKET

LOOSE FURNITURE

Sno Item Description Quantity Unit Rate/unit Total

4.1 Supply and fixing of GM table of size 1950mmx900mmx50mm

Providing of table top of size 1950mmx900mmx50mm made out of 18mm plywood finished with laminate on one side and approved veneer on all other sides 3 Nos 17132.00 51396.00

and thickness.BP of veneer 180 per sft

Providing and fixing of side return unit of size 1800mmx600mmx650mm made out of 18mm plywood finished with laminate on the inside and approved 3 Nos 27411.00 82233.00

veneer on the outside.Rate to include all hardwares including 4 sets drawer channels, locks etc BP of veneer @180 per sft

Providing of circular base of dia 450mm and 650mm height made out of plywood frame work and clad with flexi ply finished with approved vneeer and 3 Nos 20559.00 61677.00

melamine polish. BP of veneer @180 per sft

Providing of 1650mmx600mmx50mm modesty panel made out 18mm plywood finished with veneer on all sides and melamine polish. BP of veneer 180 per 3 Nos 20559.00 61677.00

5 MANAGER TABLE

5.1 Supply and fixing of Manager table of size 1650mmx900mmx50mm

Providing of table top of size 1650mmx900mmx50mm made out of 18mm plywood finished with laminate on one side and approved veneer on all other sides 4 Nos 20559.00 82236.00

and thickness.BP of veneer 180 per sft

Providing and fixing of side return unit of size 1800mmx600mmx650mm made out of 18mm plywood finished with laminate on the inside and approved 4 Nos 27411.00 109644.00

veneer on the outside.Rate to include all hardwares including 4 sets drawer channels, locks etc BP of veneer @180 per sft

Providing of circular base of dia 300mm and 650mm height made out of plywood frame work and clad with flexi ply finished with approved vneeer and 4 Nos 17132.00 68528.00

melamine polish. BP of veneer @180 per sft

Providing of 1500mx600mmx50mm modesty panel made out 18mm plywood finished with veneer on all sides and melamine polish. BP of veneer 180 per sft 4 Nos 17132.00 68528.00

6.1 Supply and fixing of Assistant Manager table of size 1500mmx900mmx50mm

Providing of table top of size 1650mmx900mmx50mm made out of 18mm plywood finished with laminate on one side and approved veneer on all other sides 4 Nos 13706.00 54824.00

and thickness.BP of veneer 180 per sft

Providing and fixing of side return unit of size 1800mmx600mmx650mm made out of 18mm plywood finished with laminate on the inside and approved 4 Nos 27411.00 109644.00

veneer on the outside.Rate to include all hardwares including 4 sets drawer channels, locks etc BP of veneer @180 per sft

Providing of circular base of dia 300mm and 650mm height made out of plywood frame work and clad with flexi ply finished with approved vneeer and 4 Nos 17132.00 68528.00

melamine polish. BP of veneer @180 per sft

Providing of 1500mx600mmx50mm modesty panel made out 18mm plywood finished with veneer on all sides and melamine polish. BP of veneer 180 per sft 4 Nos 17132.00 68528.00

7.1 Providing of FABRIC sofa of size 2100mmx900mmx800mm in reception area 1 Nos 102793.00 102793.00

7.2 Providing of fabric sofa of size 1800mmx900mmx800mm in general manager cabins 3 Nos 89087.00 267261.00

7.3 Providing of fabric arm chairs in reception area 2 Nos 47970.00 95940.00

7.4 Providing of fabric sofa of size 1800mmx900mmx800mm in for ceo cabin visitor 1 Nos 89087.00 89087.00

7.5 Providing of 3 seater leather sofa in ceo cabin 1 Nos 205586.00 205586.00

7.6 Providing of leather arm chairs in ceo cabin 2 Nos 89087.00 178174.00

Digitally signed by SAKET

LOOSE FURNITURE

Sno Item Description Quantity Unit Rate/unit Total

8 SIDE/CENTER TABLES

8.1 Providing of 750mm dia center table of height 400mm height made out of plywood, veneer base finished with melamine polish and marble top 2 Nos 51396.00 102792.00

8.2 Providing of 450mm dia center table of height 450mm height made out of plywood, veneer base finished with melamine polish and marble top 6 Nos 33579.00 201474.00

9 RECEPTION TABLE

Providing of 1500mmx1050mmx450mm box made out of 18mm plywood finished with laminate on the inside and marble on the outside. BP of marble 450 1 Nos 58249.00 58249.00

Providing of box 2400mmx750mmx700mm made out of 18mm plywood finished with laminate on the inside and veneer and melamine polish on the outside. 1 Nos 54823.00 54823.00

BP of veneer at 180 per sft

10 SECRETARY TABLE

Supply and fixing of L shaped workstation for ceo Secretary room of size 1550mmx600mm with necessary legs and support as per design.inclusive of all

material and labour.

Providing of workstation top for ceo Secretary room of size 1550mmx600mm made out of 18mm plywood finished with backer laminate on the bottom side 3 Nos 7538.00 22614.00

and approved lamiante on the top side with edges finished with 2mm edge banding matching approved laminate

Providing and fixing of workstation storage unit of size 675mmx450mm made out of 18mm plywood finished with .8mm thick laminate on the inside and 3 Nos 18503.00 55509.00

approved 1mm thick laminate on the outside.Rate to include all hardwares including 2 sets drawer channels, locks, hinges etc

Providing and fixing of 3450mmx525mmx50mm and 1750mmx525mmx50mm frame work made out of 25mmx50mm MS box section support for table top 1 Nos 23985.00 23985.00

finished in black paint.

11 10 M CONFERENCE ROOM TABLE

Supply and fixing of 10 members Conference room table of size 3300mmx1050 mm with necessary legs,frameworks and support as per design.inclusive of all 1 Nos 123351.00 123351.00

material and labour.

10 M CONFERENCE ROOM TV CONSOLE

Providing and fixing of 10M Conference room tv console of size 2400mmx450 mm and 900 mm height with marble top as per design.inclusive of all 1 Nos 51396.00 51396.00

material,assembling and labour.

12 6 M CONFERENCE ROOM TABLE

Supply and fixing of 6members Conference room table of size 2100mmx900 mm with necessary legs,frameworks and support as per design.inclusive of all 1 Nos 66404.00 66404.00

material and labour.

13 20 M CONFERENCE ROOM TABLE

Supply and fixing of 20 members Conference room curved table of size 6500mmx2475mm with necessary legs,frameworks and support as per design.inclusive 1 Nos 205586.00 205586.00

of all material and labour.

10 M CONFERENCE ROOM TV CONSOLE

Providing and fixing of 10M Conference room tv console of size 3600mmx400 mm and 900 mm height with marble top as per design.inclusive of all 1 Nos 68529.00 68529.00

material,assembling and labour.

14 PANTRY DINING TABLE

14.1 Supply and fixing of dining table of size 1250mmx750mmx50mm 1 Nos 34264.00 34264.00

Digitally signed by SAKET

LOOSE FURNITURE

Sno Item Description Quantity Unit Rate/unit Total

15 PANTRY HIGH TABLE

15.1 Supply and fixing of Pantry high table of size 3000mmx450mmx50mm 1 Nos 37691.00 37691.00

16 BREAKOUT/PANTRY CHAIRS

16.1 Providing of pantry chair as per selection. 4 Nos 3506.00 14024.00

16.2 Providing of bar stool for breakout zone area as per selection. 4 Nos 4781.00 19124.00

Item Image Description Unit Price Qty Ext. Price

1 Mesh Back Task chair

*Indicative Image Only

2 Mesh Back executive chair

*Indicative Image Only

SUB TOTAL ₹ 34,35,947.00

GRAND TOTAL ₹ 34,35,947.00

GRAND TOTAL ₹ 34,35,947.00

Grand Total 9550963.00

Grand Total 9550963.00

Grand total to summary 9550963.00

Grand total to summary 9550963.00

Digitally signed by SAKET

ART & ACCESSORIES

Sno Item Description Quantity Unit Rate/unit Total

1 FROSTED STICKERS

1.1 Supply and fixing of frosted glass flim sticker for the required area inclusive of 170 Sqmts 1788.00 303960.00

material, fixing and labour.

2 ROLLER BLINDS

2.1 Supply and fixing of roller blinds for the required area .inclusive of material ,fixing 119 Sqmts 2264.00 269416.00

3.1 Providing of 9'x6' hand tufted carpet for reception area and ceo cabin 2 Nos 53631.00 107262.00

4 WALL GRAPHICS

4.1 Painting of wall graphics by artist wherever necessary 119.5 Sqmts 1609.00 192275.50

5 GYM EQUIPMENT

5.1 Providing of gym equipments as per requirement.

a Providing of flextread treadmill from flex nest 1 Nos 59589.00 59589.00

b Providing of flexbike lite from flexnest 1 Nos 35753.00 35753.00

c Providing of flextrainer from flex nest 1 Nos 41712.00 41712.00

d Providing of flexrower lite from flexnest 1 Nos 39328.00 39328.00

e Providing of flexnest commercial compact functional trainer 1 Nos 246107.00 246107.00

Total-05 422489

Grand total 1295402.5

Grand total 1295402.5

Grand total to summary 1295402.5

Grand total to summary 1295402.5

Digitally signed by SAKET

Sno Item Description Quantity Unit Rate/unit Total

Providing of snake plant with soil in a pot of dia

Providing of aglaonema pink beauty plant with

soil in a pot of dia 150mm

Providing of stromanthe triostar plant with soil in

a pot of dia 150mm

Providing of chlorophytum spider plant with soils

in a pot of dia 150mm

Providing of 4'-5' tall areca palm plants in a

1.5 600mm dia 600mm tall ferrocement pot with soil 10 Nos 15,046.00 1,50,460.00

and bottom water tray wherever necessary

Providing of 4'-5' tall croton petra plant in a

1.6 600mm dia 600mm tall ferrocement pot with soil 10 Nos 18,658.00 1,86,580.00

and bottom water tray wherever necessary

Grand total to Summary 5,80,840.00

Grand total to Summary 5,80,840.00

Digitally signed by SAKET

LOGOS AND SIGNAGES

Sno Item Description Quantity Unit Rate/unit Total

1.1 Providing and fixing of signage made out 2 Nos 65549.00 131098.00

black acrylic sheets of 6mm thickness.

Height of each letter will be 375mm and

in width proportionally. Letters to be

fixed on the partition using industrial

grade adhesive. Depth of each letter to be

1.2 Providing and fixing of signage for 3 Nos 8939.00 26817.00

bathroom doors, pantry etc.made out of

laser cut SS sheet of 2mm thickness and

size 300mmx150mm finished with black

Grand total to summary 157915

Grand total to summary 157915

Digitally signed by SAKET