Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical S NO 46 KONDHAVA PUNE 48 PUNE MAHARASHTRA INDIA 411048 | PUNE | MAHARASHTRA | 411048 | Accepted-Technical Qualified as per NIT |
| 2 | Accepted-Technical | Accepted-Technical Qualified as per NIT |
| 3 | Accepted-Technical PLOT NO 146 MALHAR BUNGALOW G BLOCK MIDC SHAHU NAGAR CHINCHWAD PUNE | PUNE | PUNE | MAHARASHTRA | 411019 | Accepted-Technical Qualified as per NIT |
| 4 | Accepted-Technical 64 ANURADHA L B SHASTRI ROAD NAVI PETH PUNE 411 030 | PUNE | PUNE | MAHARASHTRA | 411030 | Accepted-Technical Qualified as per NIT |
| 5 | Accepted-Technical FLAT NO 57A B WING RONAK RESIDENCY NEAR DAWA BAZAR CHINCHWAD STATION CHINCHWAD PUNE MAHARASHTRA 411018 | PUNE | MAHARASHTRA | 411018 | Accepted-Technical Qualified as per NIT |
Tender Value
₹28.9 L
EMD Value
₹29,000
Closing Date
14 May 2026, 3:00 pmClosed
Registrar, SPPU
Registrar Office, Savitribai Phule Pune University Pune 7
Full height solid partition work Storage cabinet, Storage Runner Tables and side unit And Miscellaneous work
2026_UOFP_1289671_2
C.A.No.2025-26/SPPU/ ESTATE/EE/CIVIL/15
Open Tender
Interior / Furniture
Percentage
120 days
campus of SPPU
1)Single Interior or Furniture Work costing not less than Rs. 7.25 Lakhs in last three financial years 2) Avg. annual turnover in all classes of Furniture work in last 3 year not less than Rs 29.00 Lakhs (i.e.23-24, 24-25,25-26)
7 documents required · 7 mandatory
₹2,000
₹29,000
26 May 2026
7 May 2026
15 May 2026
7 May 2026
14 May 2026
7 May 2026
7 May 2026 - 14 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing & fixing in position, full height 75 mm thk solid partition made of Salwood framework of size 50mm x 50mm having grid spacing at 600mmx 600mm centre to centre both ways & covered with 12 mm thick approved plywood on both sides of framework & finished with 1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. Lipping patti of BTC fixed as per design on both sides finished of melamine polish (glossy/matt) .Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. as per the drawing, specification As directed by Engineer Incharge etc complete | 155 | Sqm | 5,051.4 | ₹7,82,967 |
| 2 | Providing and fixing flush door shutter in Single leaf 34 mm thick with teak wood bidding of size 32x12mm thk finished with 1 mm thick laminate of approved colour on both faces also including vision panel glass 5mm thick fixing with teak wood bidding on both side as per given detail drawing and all necessary hardware & accessories like Hinges, D type handles on both sides, Tower bolt, Aldrops, Door stopper, Door closure as directed by Engineer Incharge etc.complete. | 14.7 | Sqm | 6,130.35 | ₹90,116.15 |
| 3 | Providing and fixing storage unit ( storage Runner) of W 0.45 meter made of 18 mm thick plywood of approved make including shelf as per drawing and shutters both made of 18 mm thick plywood, and storage unit is finished with approved quality 1 mm thick laminate outer side& inner side finished with white laminate with all necessary fittings like hinges, towerbolt handels, lock, safety chain, magnetic stoppers of approved make etc. melamine polishing for exposed edges As directed by Engineer Incharge etc complete. | 29 | Rmt | 11,475.75 | ₹3,32,796.75 |
| 4 | Providing & Fixing storage cabinet stanadard depth 18" out to out made of 18 mm thick plywood of approved make for full hight including shelf as per drawing and shutters both made of 18 mm thick plywood , back covered with 12 mm plywood, all edges finished with TW lipping with french polish , Storage unit is finished externally with approved quality 1 mm thick laminate including finishing inner side with 0.8 mm thk laminate& back side by two coats of french polish with necessary fittings like hinges, towerbolt handels, lock, safety chain, magnetic stoppers of approved make etc. As directed by Engineer Incharge etc complete. | 93 | Sqm | 12,645.85 | ₹11,76,064.05 |
| 5 | Providing and fixing Table size of L 2.1 meter X W 0.75 meter x H 0.75 meter here in after written as (L - for length & W - for width & H for height) with Pedestal unit of L 0.4 meter X W 0.55 meter x H 0.725 meter size including 1 drawer & 1 shutter. Top of table made out of 25 mm thk. plywood with laminate both side full round post form and remaining two sides finished with 2 mm thk. PVC edge band and vertical support made out of 18 mm thk.plywood with laminate both side full round post form and remaining two sides finished with 2 mm thk. PVC edge band. Modesty made out of 18 mm thk.plywood with laminate both sides finished with 2 mm thk. PVC edge band with foot rest of size 2.05 m. x 0.3 m , ready made key board,wire manager using the hardware & hinges ,handles, locks and magnetic stoppers where ever necessary as directed by Engineer in charge. (Note :- Shade and colour of Mirror shine / Matt finish laminated sheet should be matching to existing Laminated sheet ) | 7 | Nos | 33,817 | ₹2,36,719 |
| 6 | Providing and fixing Table size of L 1.2 meter X W 0.6 meter x H 0.75 meter here in after written as (L - for length & W - for width & H for height) Top of table made out of 25 mm thk. plywood with laminate both side full round post form and remaining two sides finished with 2 mm thk. PVC edge band and vertical support made out of 18 mm thk.plywood with laminate both side full round post form and remaining two sides finished with 2 mm thk. PVC edge band. Modesty made out of 18 mm thk.plywood with laminate both sides finished with 2 mm thk. PVC edge band with foot rest of size 0.6 m. x 0.3 m , ready made key board, wire manager using the hardware and handles, locks and magnetic stoppers where ever necessary as directed by Engineer in charge. (Note :- Shade and colour of Mirror shine / Matt finish laminated sheet should be matching to existing Laminated sheet ) | 10 | Nos | 14,782 | ₹1,47,820 |
| 7 | Side Unit :- Providing and fixing side unit L O.9 meter X W 0.45 meter x H 0.725 meter size including 2 drawer & 2 shutter ,with 25mm thk plywood with laminate both side full round post form on face and remaining 3 sides finished with 2 mm thk. PVC edge band at Top. 18 mm thk plywood with laminate finished with 2 mm thk. PVC edge band for verticals , bottom and 12mm plywood with laminate both side at back with hinges. handles, locks ,Drawer channel where ever necessary, both shutters finished with 2 mm thk. PVC edge band & necessary hardware as per drawing and the specifications, as directed by Engineer in charge. etc complete.(Note :- Shade and colour of Mirror shine / Matt finish laminated sheet should be matching to existing Laminated sheet ) | 7 | Nos | 17,485 | ₹1,22,395 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
tender_PP.pdf
Tender Documents • 2.35 MB
BOQ_2233651.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .