GE 861 EWS-46(T)/2025-26

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving n.exe 15 cm thick below or above GL complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n.exe 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n. exc 2.00 Sqm each leaf complete all as specified and directed by Engineer-in-Charge.

Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class soft wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hard wood 35 mm thick panelled shutter (any number of panels) with panels of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed by Engineer-in-Charge.

Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plain, chamfered or rounded fitted and mitred beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail) supplied and fitted to chowkhats complete all as specified and directed by Engineer-in-Charge.

S&F for 30 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc windows/ventilators, divided into squares with plain chamfered or rounded, mitred and with edges of sash bars any numbers, provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelaminated PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panelled PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap insert for top rail and bottom rail panelling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long complete all as specified and directed by Engineer-in-Charge.

S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F MS ordinary rat rail rod pattern springs including roller and roller plate, 300mm complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

S&F for coloured Non-skid ceramics tiles 7 to 8mm thick area of each tiles exceeding 0.18 Sqm but n exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed/bedding layers 15mm thick in cement mortar 1:4 including complete all as specified and directed by Engineer-in-Charge.

S&F for coloured Non-skid ceramics joint free tiles 7 to 8mm thick area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed/bedding layers 15mm thick in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x250x7/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Dismantling water storage tanks of any description exceeding 500 litres capacity and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F for Rotational moulded polyethylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipe including flushing system, flush pipe & waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs floor stainless steel gratings, 125mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC valve less 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including S&F of 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm size PVC connection with PTMT nuts of 600 mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs swivel shower of PTMT any colour with arm, 195 mm long with bend of 45 degree with flange (both min weight 80 gms) complete all as specified and directed by Engineer-in-Charge.

S&F 100mm cast iron sanitary connection for WC outlet complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75 mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1complete all as specified and directed by Engineer-in-Charge.

S&F cast iron Nahani trap 75 mm dia including jointing to pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts, handle, screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 15 mm bore CP stop/angle valve cast copper alloy screwed down, high pressure with crutch or butterfly handle fancy type complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 15 mm bore Stop valves, cast copper alloy with long shank and cup (concealed type) cast copper alloy screwed down, high pressure fancy type complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20 mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore GI tubing medium grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore GI tubing medium grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm grade crushed stone aggregate as in plinth protection etc finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Dismantling of timber scantling 40sqcm and over in section in any position in unframed work complete all as specified and directed by Engineer-in-Charge.

S&F in repairs timber frame work in clean sawn second class hard wood as in scantling etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair face of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortar 1:6 finishing on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing plastered or un plastered new surface of walls and applying two coats of Cement base paint on walls (External) complete all as specified and directed by Engineer-in-Charge.

M&L for applying 3 mm thick wall care putty on new surface of wall and applying two coats of oil bound distemper on wall complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on new wooden surfaces over coat of pink to new surfaces including preparation of surfaces, over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide zinc chrome primer including preparation of surfaces, over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on old wooden surfaces including preparation of surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old steel surface over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F framed work such as grills, grating etc with end bars, framed guard bars, railing, framed work of water tanks and similar work confirming to Fe-290 Gde-E165 complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in floor finishes etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered old surface of walls and applying two coats of cement base paint on walls (externally) including removal of existing treatment complete all as specified and directed by Engineer-in-Charge.

M&L for applying 3 mm thick wall care putty on old surfaces of wall and applying two coats of oil bound distemper on wall including complete removal of existing treatment complete all as specified and directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm frame complete all as specified and directed by Engineer-in-Charge.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suitably placed in false celling grid made of aluminium & GI/MS as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 40mm thick, 2nd class hardwood planks, planed one side with butt joints and fixed with nails complete all as specified and directed by Engineer-in-Charge.

M&L in repairs for weather boarding in 2nd class softwood clean swan, plain, 20 mm thick or feather edges, 15 mm to 20 mm thick and fixed with 30 mm laps joints complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick PCC (1:4:8), type D-2 in sub base using 40 mm graded crushed stone aggregate complete all as specified and directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles glossy finished 30cm x30cmx25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for Roof Treatment of roof of Bldg/Stair Case/Tank Portion including the fwg:- (i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. (ii) M&L for 25mm thick Cement Concrete padding, type B-0,1:2:4 (12.5mm graded crushed stone aggregate) as in top of roof. (iii) Rendering or bedding layer of mortar 15mm thick in cement mortar 1:4 (rendering is to be finished even and smooth in without using extra cement) for applying water proofing treatment (v) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg /Sqm over bituminous primer @ 0.30ltr per Sqm including cleaning and preparing surfaces. (vi) APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by torched application method.

M &L for preparing plastered or un plastered new surface of walls and applying two coats of Cement base paint on walls a coat of alkali-resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of Fire Retardant Water Based Wall Paint protective coating to reduce flame spread and enhance fire resistance for wall and Ceiling complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25 cm soft/disintegrated rocks complete all as specified and directed by Engineer-in-Charge.

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type C2 (1:3:6) (using 40mm graded crushed stone aggregate) for fixing of post in post holes complete all as specified and directed by Engineer-in-Charge.

S&F mild steel work in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM (1:3) etc complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring for one light point/fan point controlled by one switch with 1.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including stove enamelled steel conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunken box of required size or PVC Gang Box complete all as specified and directed by Engineer-in-Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring for one light point/fan point controlled by one switch with 1.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunken box of required size or PVC Gang Box all as directed by Engr-in-Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engineer-in-Charge.

All as per Ser item No-89 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Ser item No-89 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed by Engineer-in-Charge.

Description all as per item No-89 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer-in-Charge. (Make - Anchor/Cona/Kinjal)

S&F for Switch Socket combination, 6 pin 5 and 15 amps multipurpose 2 in 01 flush type, 230 volts complete all as specified and directed by Engineer-in-Charge. (Make - Anchor/Cona/Kinjal)

S&F for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts complete all as specified and directed by Engineer-in-Charge. (Make - Anchor/Cona/Kinjal)

S&F Socket 2 in 1, 5 Amps flush type, 230 volts complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer-in-Charge. (Make - Anchor/Cona/Kinjal)

S&F Flame proof light fitting 1x45W (BIFPWG) LED light driver connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Make: Bajaj Cat part No 45W LED (BIFPWG) or equivalent in Havells, Crompton, Sudhir

S&F LED lights fitting 1x20W, 230V, AC decorative box type with drive, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. Make- Havells /Philips/Surya

S&F LED lights fitting 1x10W, bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete as of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

S&F laying in trenches, pole, and along wall etc complete, XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volt grade, cross sectional area 16 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in not exceeding 1.5 mtr vide and 1.5 mtr in depth and getting out in any type of soil for laying of under ground cable complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading levelling watering and well ramming in layers as in soils complete all as specified and directed by Engineer-in-Charge.

Removing of surplus excavated material to a distance n. exc 50 mtr and deposing where directed at a level not exceeding 1.5 mtr from the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning in trenches for cable protection complete all as specified and directed by Engineer-in-Charge.

M&L for Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' bricks laid across the cable complete all as specified and directed by Engineer-in-Charge.

S&F 40 mm dia bore GI tubing, water tubing medium grade (ISI marked) laid in trenches/fixed on walls including fittings as required as site and including jointing internal as specified of size complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated bush bar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer-in-Charge. Make: Indoasian Cat part Nol:KSLT0008 or equivalent in Legrand/ Havells/ ABB

Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated bush bar with neutral link, 8 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer-in-Charge. Make: Indoasian Cat part Nol:KSLT0008 or equivalent in Legrand/ Havells/ ABB.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying SPN 40-63 Amps capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amps in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and fix Bus Bar Chamber of size 60 x 60 x 45 cm suitable of 3 phase 433 Volts outdoor type made out of 3.15 mm thick M S Sheet with 400 Amps rated aluminium bush bar (4 Nos ) PVC sleeves and coloured (Red, Yellow, Blue and Black) with locking arrangements and angle iron stand of size 40 x 40 x 6mm frame grouted in ground with PCC foundation (1:2:4) type C1 with 20mm graded stone aggregate alongwith all necessary cable connections, lugs and cable gland including 2 coat of paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 2.25mtr deep below normal ground level as earth electrode with top edge of the earth plate not less than 1.5mtr below normal ground level, continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC (1:3:6) adequate quantity of charcoal dust and salt and Kalmi Shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or complete all as specified and directed by Engineer-in-Charge and incl testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deem to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately. (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC (1:3:6) adequate quantity of charcoal dust and salt and Kalmi Shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or complete all as specified and directed by Engineer-in-Charge and including testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deem to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A part-IV (Sec-I). (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department.

Taking down copper/aluminium sub main wiring of any size complete without conduit complete all as specified and directed by Engineer-in-Charge.

Taking down main switches/DBs/Change over switches etc complete all as specified and directed by Engineer-in-Charge.

S&F fan regulator Electronic type complete all as specified and directed by Engineer-in-Charge (Make-Anchor/Cona/Kinjal).

S&F Lamp holder insulated body with back plate for batten fittings complete all as specified and directed by Engineer-in-Charge.

Supply only LED lamp 9 Watt, 230 Volts complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable bldg's security light fitting and taken as credit including supply and fix 25 watt, new Generation Energy Saving and Environmental friendly long life Versatile Pressure Die cast aluminium IP-65 roadway luminaries with high power LED as light source alongwith suitable Bracket including all accessories complete all as specified and directed by Engineer-in-Charge. Make: Havells, Bajaj, Philips.

M&L for sub main wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 6 Sqmm and one single core PVC insulated unsheathed FR flexible copper conductor cable of size 4 Sqmm as earth lead in & including PVC casing/non Metallic rigid PVC conduit medium grade and making good the disturbed at site or complete all as specified and directed by Engineer-in-Charge.

Supply and fixing electronic water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 Ltrs, BEE 5 star rated complete with all accessories such as safety valves, thermostat, NRV, connections piece etc complete all as specified and directed by Engineer-in-Charge (old unserviceable geyser will be deposited at MES Store yard).

S&F energy exhaust fan 300 mm sweep sturdy engineering plastic complete with lovers shutters, voltage 230V, 50Hz, RPM 1200, copper winding making hole in wall as it where required and , connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site and old UNSV Exhaust fan from building depositing to MES store yard complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting mirror type with high out put diffuser 1x5Watt, 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt (White/ Warm White), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.

Taking down ceiling fan of any size after disconnecting the wire from existing ceiling rose and deposited to MES Store yard and Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep Min air delivery 210 CFM with service valve 6.00 BEE. Five star rated brushless direct current motor (BLDC) complete all as specified and directed by Engineer-in-Charge.

S&F laying in trenches, pole, and along wall etc complete, XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volt grade, cross sectional area 25 Sqmm 3 core complete all as specified and directed by Engineer-in-Charge.

Removing the old unserviceable service cable taken as credit including Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 Sqmm nominal cross section in service connections of 16 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

M/S SHEIKH FEROOZ AHMAD (BID ID -3488806)

M/S A.N CONSTRUCTIONs (BID ID -3487832)

M/S NEW IQBAL ENTERPRISES (BID ID -3490361)