COMPREHENSIVE MAINTENANCE AND REPAIR IN THE AOR OF POCKET NO. 12 UNDER GE (A) JAISALMER AT MIL STN JAISALMER

M&L for preparation of new plastered surface and applying two coat of white or tinned with cement base paint on exterior wall complete all as specified and directed by Engineer-in-charge.

M & L for Chipping of 12-15 mm average thickness unsound/weak plaster concrete material from slabs, beams, columns/break work, masonery wall etc. with manual Chisel or by standard power driven percussion type machine of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed surface with wire brushes etc. and disposal of debris for all lead. further applying 12-15 mm Ready to use plaster Ultratech Readiplast RP or equivalent. Its excellent replacement to conventional plaster and conforms to IS 1661-1972, IS 2250-1965, IS 2402-1963, It can be applied using trowels or spatula like in conventional system. can be applied for 15 mm thickness in a single layer for thickness above 15mm multiple layer is recommended. Water powder ratio is 16-19% by weight, compressive strength @ 28 days in 10-12Mpa, Material consumption 20-25kg/Sqm for 12-15mm thickness, all complete as per direction of Engineer-In-Charge. Note : The quoted rate by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 mtr height.

M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of wall and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.

M&L for Preparing of new plaster surface and applying three coat of white wash on newly plaster surface of wall complete all as specified and directed by Engineer-in-charge.

M& L plain cement concrete 1:2:4 type by using 20mm graded stone agregate as in flooring with water proofing compound @ 2% dosage (1kgs) in 50kg cement including demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed by Engineer-in-charge.

Supply of SBR based waterproofing compound @ 2% dosage by weight of cement (1kgs) of 50kg cement used to be mixed in cement concrete as water proofing and hardening complete all as specified and directed by Engineer-in-charge.

M & L For applying Pitch Free PU based Liquid applied single component elastomeric seamless, water and vapor proof membrane system Nitoproof 600PF for concrete @ 2.50 kg/m2 (2 coats). Typical applications will include roofs, podiums, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pools, bridge decks, Conforming Tensile Strength (2N/mm2 ) (ASTM D412) / Tear resistance (15 kN/m) (ASTM D624-00 and Crack bridging (ASTM C836 / ASTM C1305 modified)2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water. Note : All above operations to be done in presence of auth applicator in order complete all as specified and directed by Engineer-in-charge.

M&L for Non - skid colored ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. by fixing with 6-8mm thick bedding of TYPE2 tile adhesive Make: Ultratech TileFixo range and pointed in epoxy grouing only for laying floor finishes complete all as specified and directed by Engineer-in-charge. Note : Work will be in patches or in bulk.