Estimate for Beautification of Road from Rajiv Chowk to CP 12 including Construction of Footpath and Installation of Street Lights

Earth work containing Gravel (in loose from in non cohesive binding material) work in excavation with occasional use of picks exclusive of compensation of earth undressed icluding all lifts and leads with percentage of gravel or Kankar. Exceeding 40 % but upto 60 %.

Providing and laying Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type.

Providing and laying Cement concrete 1:3:6 mixing by mechanical means using concrete mixer volumetric type

Providing and laying Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.(75mm o/d PVC pipe of 4 Kgf. / sqcm)

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge

Providing and filling coarse sand in unpaved portion and below the interlocking tile for depth of filling more than 40mm.

Providing and Fixing MS Raling with 3” Hollow square pipe for vertical post embedded with PCC after interval of 3.0 m with 3’-6”exposed height, welded with 2” hollow square pipe horizontally top and bottom rail with MS post and 1”hollow Square pipe welded vertically with spacing of 4”interval between two horizontal 2” MS pipe as per pattern approved by Engineer-in-Charge and finishing with Synthetic enamel paint of two or more coat over a coat of red oxide complete work.

Providing, supplying, erecting, installing, testing and commissioning of complete Street Light System, including ISI marked RCC muff foundation (10" dia × 2.0 m height), ISI marked MS steel tubular pole with bend (Bottom 165×5.40 mm, Middle 139.7×4.50 mm, Top 114.3×3.65 mm) complete with fittings, 120 Watt LED street light luminaire of approved make (Havells / Crompton / Bajaj / Polycab / Philips or equivalent), underground laying of 4 core × 25 sq.mm aluminium armoured cable ISI marked of approved make (Plaza / Polycab / Havells / KEI or equivalent), automatic timer switch suitable for 15 poles, including painting of poles with two coats of 1st quality aluminium paint of approved make (Asian / Berger / Nerolac or equivalent), complete with all labour, material, tools & plants, excavation, refilling, transportation, wiring, erection, earthing, testing and commissioning, complete in all respects as per directions of Engineer-in-Charge.

Providing & Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Providing & Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Please Enable Macros to View BoQ information