MAINTENANCE WORKS COMPRISING REPAIRS TO PATH, PROTECTIVE WORK, BOUNDARY WALL, E/M INSTALLATIONS, LEAKAGE / SEEPAGE IN SUNKEN FLOOR, WALL, ROOF TREATMENT WITH OTHER MAINTENANCE WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and directed by Engineer-in-Charge.

Description all as per serial item No 1.00 here-in-before but exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters and refixing in same opening after resecuring or easing and adjusting, also refixing builders hardware as required including renewal of unserviceable screws etc of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Material and labour factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and directed by Engineer-in-Charge.

Suppy and fixing 30mm thick flush shutters, soild core construction, with particle board core and plywood face panels, both faces are covered with decorative face veenered with lipping / frame to match complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35mm thick factory made Ist class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Part-I Section 8.24(b) supplied and fitted to chowkhats complete all as specified and directed by Engineer-in-Charge.

Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 and all as directed. Note: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs.

Material and labour plain cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel chowkhats, bed block for holdfast and the like complete all as specified and directed by Engineer-in-Charge.

Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors / gates, ladders, framed balusters, walk ways, railing, frame work of water tanks, cupboard frame etc (including cutting holes in brick masonry walls and fixed with PCC 1:11 / 2:3) and similar work confirming to Fe-290-Gde-E-165 including taking down old grills, gratings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Aluminium anodised barrel tower bolts, with bright bolts and fixed 200mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Helical door spring 150mm including roller and roller plate complete fixed with welding to existing steel chowkhats all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from the wooden / steel frames glazing with putty or fixed with wooden beads complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 storey building complete all as specified and directed by Engineer-in-Charge.

Description all as per serial item No 16.00 here-in-before but frosted glass complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coats of synthetic enamel paint on old steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning of bore 15mm dia complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning of bore 20 mm dia complete all as specified and directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm complete all as specified and directed.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and directed.

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and directed.

Material and labour for disconnecting existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC low level flushing cistern valve less, syphonic action type of 10 litres capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia, PVC connection (15 x 450 mm) long complete all as specified and directed.

Supply and fixing in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Vitreous china wash hand basin white, flat back of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia complete all as specified and directed.

Dismantling PVC water storage tanks of capacity upto 1000 litres and removing from site complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and directed.

Supply and fixing in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142 grams) of 15 mm bore complete all as specified and directed.

Supply and fixing in repairs 20 mm dia Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Repairing of existing float valve by replacing its rod of brass or plastic float of any description complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantonment area complete all as specified and directed. Note: - Plaster work may be carried out in patches upto triple storey.

Material and labour rendering 10 mm thick in CM 1:6 on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and directed.

Material and labour rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour rendering 15mm thick in CM 1:4 in two layers of 10 mm thick and 5 mm thick with water proofing compound on fair faces of brick surface finished even and smooth without using extra cement complete all as specified and directed. (including all necessary scaffolding, lifiting arrangement for external surfaces).

Material and labour for two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coats of cement based paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surface complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying two coats of exterior emulsion paint on old plastered surface of chajjas including preparation complete all as specified and directed.

Complete removal of existing treatment of old surface of wall (plastered or unplastered) and applying one coat of cement based paint complete all as specified and directed.

Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and directed.

Dismantling floors, hearth or wall tilling including cement mortar bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles 300 x 450 x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in CM 1:4 complete all as specified and directed.

Supply and fixing in repairs waste coupling of PTMT (half or full threaded) of bore dia 32 mm discharge pipe complete all as specified and directed.

Supply and fixing in repair Grating doom 100mm dia without hole chromium plated complete all as specified and directed.

Supply and fixing in repair Grating doom 100mm dia with hole, chromium plated complete all as specified and directed.

Supply and fixing in repair PVC Waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin / sink complete all as specified and directed.

Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) bends of bore 110mm dia complete all as specified and directed.

Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus, moss, dust etc., cleaning the surface of all foreign material by wire brushing and dusting and racking out RCC slab and removing the debris outside defence land complete all as specified and directed.

Material and labour for rendering 20 mm thick in CM 1:4 on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and directed. Note: - Liquid water proofing compound shall be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and as directed.

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 litre/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 kg / sqm reinforced with non woven polyster mat weighing not less than 160 gm / sqm, having softening point not less than 800 N / Sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15 cm end laps, laying by application of torch and applying two coats of aluminium paint complete all as specified and directed.

Material and labour for rendering 15mm thick in cement sand mortar 1:4 mixed with and including liquid integral water proofing compound 0.20 litre per 50 kg bag of cement both on floor and wall after proper curing and drying and apply epoxy resins coating polymer modified cementation coating like brush bond of Fosroc Pidilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors including 75 mm thick PCC type (1:2:4) type B-2 flooring complete all as specified and as directed by Engineer-in-Charge. Note: - Only floor area shall be measured.

Supply and fixing 75mm dia CI floor trap, with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair cover of CI oval access door with bolts and rubber gasket to make it water tight for 100 mm bore CI bends complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair cover of CI oval access door with bolts and rubber gasket to make it water tight for 75 mm bore CI bends complete all as specified and directed by Engineer-in-Charge.

Dismantling CI / PVC pipe 75 / 100mm bore complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 75 mm outer dia CPVC Schedule 80 pipes and plain CPVC Schedule 80 fittings complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 100 mm outer dia CPVC Schedule 80 pipes and plain CPVC Schedule 80 fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with MS square tube, supplying and fixing in opening as per specification complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II all as specified and as directed by GE / Engineer-in-Charge.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand aggregate), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5mm), including making of drainage opening wherever required complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nail complete all as specified and directed.

Supply and fixing Aluminium handle cast type, anodised size 150mm long, 'D' type complete fitting all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling of stone / boulder masonary, built in lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for RCC M-25 Design Mix (using 20 mm graded crushed stone aggregate) as in column footing including raft footings, foundation, plinth beam, bases of columns etc. complete all as specified and directed.

Material and labour for RCC M-25 Design Mix (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

Material and labour for RCC M-25 Design Mix (using 20 mm graded crushed stone aggregate) as in columns, pillars etc complete all as specified and directed.

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of rough finished surfaces complete all as specified and directed.

Use and waste form work Square, rectangular or polygonal to sides of columns, pillars etc. of rough finished surfaces complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of rough finished surfaces complete all as specifed and directed.

Material and labour for steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia complete all as specifed and directed.

Description all as per Ser Item No 80.00 here-in-before but 5mm dia and over upto and including 10 mm dia as in Binders, stirrups, spacer complete all as specified and directed.

Material and labour brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 m mean radius build in CM 1:6 complete all as specified and directed.

Material and labour rendering 15mm thick in CM 1:4 on fair faces of brick surface finished even and smooth without using extra cement etc complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

Material and labour for 15mm thick screed bed or bedding layers of cement mortar 1:4 complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed. Note : The cost of necessary sand filling required below interlocking tiles as per site requirement shall be deemed to be included in rate quoted.

Material and labour including preparation of new concrete surfaces and applying two coats of synthetic enamel paint over a coat of white primer complete all as specified and directed.

Material and labour walling of polygonal rubble, uncoursed well bonded, bedded solidly hearted, built in CM 1:6 complete all as specified and directed.

Description all as per Ser item No 88.00 here-in-before but except stone complete all as specified and directed.

Material and labour for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete all as specified and directed.

Material and labour for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S BALWAN SINGH

M/S LANGER CONSTRUCTION COMPANY

M/S PRITHIVI RAJ AND SONS

M/S Sukhmani Construction Co.

M/S CHOUDHARY BUILDERS

ASHFAQ AHMED MANHAS

kerni electricals

Bidder Name

M/S Sukhmani Construction Co.

ASHFAQ AHMED MANHAS

kerni electricals

M/S PRITHIVI RAJ AND SONS

M/S ELECTROMATICS

M/S CHOUDHARY BUILDERS

M/S BALWAN SINGH

M/S LANGER CONSTRUCTION COMPANY